Abstract:
본 발명은 ATM 교환 시스템에서의 VPN 망내 호 발신 호 제어방법에 관한 것으로서, 가입자가 보낸 망내 호 시도를 수신하는 단계와, 수신한 망내 호 시도의 호 설정 메시지 내부 번호 계획 식별자가 사설 번호 계획 식별자를 사용하는지를 확인하는 단계와, 상기 확인 결과 사설 번호 계획 식별자를 사용하는 VPN호이면 발신 가입자의 VPN 가입 여부를 판단하여 VPN 가입자이면 VPN 가입자 정보 테이블에서 발신 가입자의 VPN 정보를 추출하는 단계와, 상기 추출된 VPN 정보를 가지고 VPN 유형을 분석하여 망내호이면 발신 금지 호 제한 여부 및 폐쇄 사용자 그룹 내부 호의 호 제한 사항을 조사하고, 망외호이면 망외호 처리를 하고, 기타 호이면 호복구 처리를 수행하는 단계와, 호 제한 사항 조사 결과 상기 호를 제한하면, 호 복구 처리를 수행하고, 제한하지 않으면 VPN 그룹의 구성 등급을 분석하는 단계와, 상기 구성의 등급 분석 결과 자국 VPN이면 자국 VPN 착신 가입자 루팅 정보를 추출하고, 광역 VPN이면 광역 VPN 착신 가입자 루팅 정보를 추출하는 단계와, 상기 단계에서 추출된 VPN 루팅 정보 추출 결과를 확인하여 상기 VPN 루팅 정보 추출 결과에 따라, 발신호 처리 또는 호복구 처리를 수행하는 단계로 구성된다.
Abstract:
본 발명은 이동통신 교환기에서의 이동가입자 발신호 제어 방법에 관한 것이다. 본 발명은 기지국 제어장치인 BSC(Base Station Controller); ASS(Access Switching Subsystem), INS(Interconnection Network Subsystem) 및 CCS(Central Control Subsystem)을 포함하는 MSC(Mobile Service Switchin Center); 및 가입자의 위치 등록을 관장하는 HLR(Home Location Register)로 구성되는 이동통신 시스템에 적용되어, 호 제어 상태를 휴지, 발신가입자정보 수신 대기, 망식별번호 번역 대기, 루팅 정보 수신 대기, 로밍가입자번호 번역 대기, 착신가입자정보 수신 대기, 페이지 대기, 스위치 연결 대기, 얼러팅(alerting)대기, 착신 응답 대기, 통화중 및 발신 절단 대기의 상태들로 나누어 관리함으로서 효율적인 호 제어 방법을 제공한다.
Abstract:
본 발명은 전전자 교환기 내부에 인터넷 트래픽을 라우팅 할 수 있도록 ISDN 가입자와 인터넷 서비스 제공자간에 통화로를 설정하고 유지시켜 주는 가입자 호 제어방법에 관한 것으로서, 인터넷 가입자 접속 호 설정 요구 신호에 의해 착신 기능 처리를 위한 자 프로세서 하나를 생성하고, 생성된 자 프로세서에서 인터넷 트래픽 라우팅 기능을 담당하고 있는 블록으로 중계선 링크 상태 확인을 요구하고, 상기 요구된 블록으로부터 중계선 상태 확인 통보 신호를 받아 처리하고 인터넷 트래픽을 전송하기 위한 고정 회선인 통화로를 연결하고 PPP연결 설정 개시를 알리기 위해 가입자의 인터넷 접속을 담당하는 블록으로 인터넷 접속 호 설정 요구 신호를 전송하고 응답을 기다리며, 상기 요구된 블록으로부터 인터넷 접속 호 설정 완료 통보 신호를 받아 처 리하고 PPP 연결 설정 완료 신호를 기다린 후, 상기 요구된 블록으로부터 PPP연결 설정 완료 신호를 수신하면 인터넷 트래픽 통신이 가능하도록 할당된 회선 상태를 유지하는 전전자 인터넷 접속 서비스를 위한 가입자 호 제어방법을 제공함으로써, 인터넷 서비스를 제공받기 원하는 가입자에게 고속이면서 비용이 저렴한 인터넷 접속 서비스를 제공할 수 있는 기반을 마련하는 효과가 있다.
Abstract:
1. 청구 범위에 기재된 발명이 속한 기술분야 본 발명은 광대역 전달 능력(Broadband Bearer Capability) 정보요소 필드의 파라미터 설정 방법에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 서비스 품질(Quality of Service : QoS)을 보장해주기 위해 ITU-T Q.2931에서 정의한 셋업 메시지내의 광대역 전달 능력 정보요소 필드의 파라미터 설정 방법을 제공하고자 함. 3. 발명의 해결방법의 요지 본 발명은, 공중망 ATM 교환시스템에서 상대방 착신측을 IP 헤더의 착신측 IP 주소로 구별하고, 각각의 응용 프로그램을 TCP/UDP 헤더의 발신측 포트를 이용하여 구별함으로써, 발신측 포트로 구별된 응용에 따라 서로 다른 파라미터 매핑을 통해 서로 다른 망 특성을 가지는 서비스들의 품질을 보장할 수 있다. 4. 발명의 중요한 용도 본 발명은 공중망 ATM 교환시스템에 이용됨.
Abstract:
The method controlling a mobile originating call of a mobile service switching center applied to a mobile communication system, which comprises: a mobile service switching center MSC (11) including a base station controller BSC(10), an access switching subsystem ASS (13) performing a spread call processing function, an interconnection network subsystem INS (14) performing a concentrated call processing function, and a central control subsystem CCS (15) performing a centralized function of an operation and maintenance; and a home location register HLR (12) controlling a location registration of a subscriber, is comprised of: the first step (21-24) of judging from originating subscriber information whether it is possible for the mobile subscriber to call, if an originating occupation request is received from an originating party, and translating a network identification number to judge whether it is a call to be transmitted to a mobile network; the second step (25-29) of responding a transmitting subscriber paging, after the paging of the incoming subscriber, since the call is the subscriber to be transmitted to won station as s result of analyzing routing information after the first step, and if it is possible to make an incoming paging as a result of analyzing incoming subscriber information, and provided a ring back tone to the originating subscriber; the third step (2a and 2b) of responding by incoming subscriber if a ring tone rings after the second step; and the fourth step (2c and 2l) of performing a call release processing upon a call termination of the subscriber after the third step.
Abstract:
A mobile subscriber signal processing interface method checks all messages applied from Interprocessor Communication(PIC) network of a base station control block, transmits only accurate message to an upper call-processing block, checks an interchange line from a control station in case of a call setting request, allocates a call ID by using a usable interchange line, and stores a message information element to the call ID. In case of non-usable interchange line, the method transmits a new interchange line allocation request to the control station, thereby achieving an effective call-processing. In a full electronic telephone exchange, the mobile subscriber signal processing interface method receives an outgoing signal processing request message, performs an outgoing processing; receiving the incoming signal processing request message, starts the incomming signal processing; and processing a restoration request of the outgoing/incoming subscribers.
Abstract:
translating a subscriber number if a subscriber state management data calling request and a paging request is received from a calling party, searching a line table in a process and pause state, and constituting a subscriber link to be in an occupied state; and upon release of the occupied state, checking the state from a first link of subscriber information to make the subscriber state in a pause state in accordance with the line table of the subscriber and releasing the occupied state to complete the above process.
Abstract:
1. 청구 범위에 기재된 발명이 속한 기술분야 본 발명은 광대역 전달 능력(Broadband Bearer Capability) 정보요소 필드의 파라미터 설정 방법에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 서비스 품질(Quality of Service : QoS)을 보장해주기 위해 ITU-T Q.2931에서 정의한 셋업 메시지내의 광대역 전달 능력 정보요소 필드의 파라미터 설정 방법을 제공하고자 함. 3. 발명의 해결방법의 요지 본 발명은, 공중망 ATM 교환시스템에서 상대방 착신측을 IP 헤더의 착신측 IP 주소로 구별하고, 각각의 응용 프로그램을 TCP/UDP 헤더의 발신측 포트를 이용하여 구별함으로써, 발신측 포트로 구별된 응용에 따라 서로 다른 파라미터 매핑을 통해 서로 다른 망 특성을 가지는 서비스들의 품질을 보장할 수 있다. 4. 발명의 중요한 용도 본 발명은 공중망 ATM 교환시스템에 이용됨.