Abstract:
An optical modulator, a method and an apparatus for controlling a bias voltage of the optical modulator are provided to control bias voltages of two optical modulators efficiently through feedback control of the bias voltages according to detection of a fourth harmonic signal to maintain final output characteristic with stability. An optical modulating device includes a light generator(11), a first optical modulator(12), a second optical modulator(13), and a bias controller. The first optical modulator turns on/off light generated by the light generator according to a reference clock signal to modulate the light into an optical pulse signal with a predetermined period. The second optical modulator turns on/off the optical pulse signal output from the first optical modulator according to data to be modulated to modulate the optical pulse signal into an optical output signal with the data loaded thereon. The bias controller applies a first low-frequency RF signal with a first bias voltage to the first optical modulator, applies a second low-frequency RF signal with a second bias voltage to the second optical modulator, detects a fourth harmonic component of the first RF signal from the optical output signal of the second optical modulator and controls the first bias voltage and the second bias voltage such that the fourth harmonic component has a minimum current.
Abstract:
1. 청구범위에 기재된 발명이 속하는 기술분야 본 발명은 광변조기의 바이어스 전압 최적화 장치 및 그 방법과 그를 이용한 광송신 시스템에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 광변조기의 바이어스에 따라 광출력 신호의 형태 및 클럭 성분의 크기가 변화되는 점을 고려하여, 자동 바이어스 초기화 제어에 따라 광변조기에 인가되는 바이어스 동작전압을 안정화시키기 위한 광변조기의 바이어스 전압 최적화 장치 및 그 방법과 그를 이용한 광송신 시스템을 제공하고자 함. 3. 발명의 해결 방법의 요지 본 발명은, 광송신 시스템에서 광변조기의 바이어스 전압 최적화 장치에 있어서, 상기 광변조기의 광대역 스펙트럼의 주파수 성분들 중 클럭 주파수 성분을 추출하기 위한 클럭성분 추출수단; 추출된 주파수의 전기적 세기를 검출하여 전기적 세기의 최소 지점을 찾고, 현재 검출된 전기적 신호의 세기가 전기적 최소 지점이 되도록, 소정의 바이어스 전압을 가변하면서 바이어스 동작전압을 적응적으로 제어하기 위한 바이어스 전압 제어수단; 및 상기 바이어스 전압 제어수단의 제어하에, 상기 광변조기의 바이어스 동작전압을 조정하기 위한 바이어스 전압 조절수단을 포함함. 4. 발명의 중요한 용도 본 발명은 광송신기 등에 이용됨.
Abstract:
1. 청구범위에 기재된 발명이 속하는 기술분야 본 발명은 전계흡수 광 변조기 내장형 레이저의 직류상쇄전압 조절에 따른 출력 파장 변화의 자동 보정 방법에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 광통신용 광원에 해당하는 전계흡수 광 변조기 내장형 레이저(EML: Electro-Absorption Modulator Integrated Laser Diode)에서의 직류상쇄전압(DC_Offset Voltage)과 출력파장과의 함수관계, 및 동작온도와 출력파장과의 함수관계를 이용하여 직류상쇄전압의 변화에 따른 출력 파장의 변화를 EML의 동작 온도의 조절로 간이/신속하게 보정하는, 전계흡수 광 변조기 내장형 레이저의 직류상쇄전압 조절에 따른 출력 파장 변화의 자동 보정 방법 및 상기 방법을 실현시키기 위한 프로그램을 기록한 컴퓨터로 읽을 수 있는 기록매체를 제공하는데 그 목적이 있음. 3. 발명의 해결 방법의 요지 본 발명은, 전계흡수 광 변조기 내장형 레이저(EML)의 직류상쇄전압 (DC_Offset Voltage) 조절에 따른 출력광신호의 파장 변화의 보정 방법에 있어서,초기에 설정된 구동 전류, 동작온도, 직류상쇄전압(DC_Offset Voltage), 및 증폭 전압으로 동작하는 상기 EML의 직류상쇄전압(DC_Offset Voltage)을 재설정받는 제 1 단계; 상기 EML에서의 직류상쇄전압(DC_Offset Voltage)과 출력 파장과의 함수관계를 이용하여 상기 재설정된 직류상쇄전압(DC_Offset Voltage)에 대한 출력 파장을 예측하는 제 2 단계; 및 상기 EML의 동작온도와 출력파장과의 함수관계를 이용하여 상기 제 2 단계에서 예측한 출력 파장에 대한 동작온도를 예측하고, 출력 파장의 변화를 보정하기 위하여 상기 예측된 동작온도로 동작온도를 재설정하는 제 3 단계를 포함함. 4. 발명의 중요한 용도 본 발명은 광통신 시스템 등에 이용됨.
Abstract:
본 발명은 광트랜스폰더의 운용 장치 및 그 운용 방법에 관한 것이다. 본 발명에 따른 운용 방법은, 다수의 계층이 존재하는 광 전송 시스템에서 디지털 랩퍼(wrapper)를 장착한 광트랜스폰더에서 신호의 유지보수를 수행하는 운용 방법으로, a) 상기 디지털 랩퍼로부터 수신 신호 감시에 따라 인터럽트가 발생되면, 해당 인터럽트를 처리하는 처리부를 호출하는 단계; b) 상기 호출된 처리부가 상기 수신 신호에 어떠한 장애가 발생되었는지를 탐지하고, 수신 신호의 유지 보수 여부를 탐지하는 단계; c) 상기 탐지에 의하여 장애가 검출되거나 해제되었을 경우의 장애 처리를 수행하는 단계; 및 d) 상기 장애 및 유지보수 처리 결과에 따라 상기 디지털 랩퍼를 제어하는 단계를 포함한다. 이러한 본 발명에 따르면, 디지털 랩퍼가 장착된 광트랜스폰더에서, 디지털 랩퍼의 오버헤드를 이용하여 전송되는 클라이언트 신호에 무관하게 광 채널을 효율적으로 감시 및 관리 할 수 있다.
Abstract:
본 발명은 광채널의 유지보수 운용을 위한 오버헤드와 에러 정정을 위한 오버헤드를 포함하는 G.709 프레임을 처리하는 광트랜스폰더 및 그것의 광채널 하부 계층에 대한 장애 탐지 및 처리 방법에 관한 것으로, 상기 장애 탐지 및 처리 방법은 (a) 상기 프레임에 장애 및 유지보수 신호가 발생되었는지를 검출하는 단계; (b) 상기 (a) 단계에서의 검출 결과 상기 장애 및 유지보수 신호가 탐지되거나 해제되었을 경우 복수 개의 계층들 중 장애가 반영되어야 하는 소정의 계층에 대한 장애 처리를 수행하는 단계; 및 (c) 상기 소정의 계층에 대한 장애 원인을 탐지하는 단계를 포함한다.
Abstract:
본 발명은 광 수신기의 출력신호중 저주파 대역의 신호에 기초해서, 신호 레벨 판별에 적합하도록 광 수신기의 판별 문턱전압을 자동적으로 제어하는 광 수신기의 문턱전압 제어 장치를 제공하는데 그 목적이 있다. 본 발명은, 입력되는 광신호를 전기신호를 변화하는 광 수신기(410)의 문턱전압의 레벨을 제어하는 장치에 있어서, 상기 광 수신기(410)의 출력신호중 일부를 분기하여 전압으로 검출하는 전압검출부(421); 상기 전압검출부(421)에서 검출된 전압(Vd)과 입력되는 기준전압(Vref)을 비교하여 그 차전압을 출력하는 차동 비교부(422); 상기 차동비교부(422)에서 출력되는 차전압을 사전에 설정된 저역으로 통과시켜 상기 광 수신기(410)의 문턱전압(Vth)으로 공급하는 저역 통과 필터부(423); 및 상기 저역 통과 필터부(423)로부터의 문턱전압과 사전에 설정된 최소 비트 오율에 해당되는 설정 전압과의 차전압에 따라, 상기 차동 비교부(422)의 기준전압(Vref)을 조절하는 전압 제어부(424)를 포함하여, 상기 광 수신기의 문턱전압을 최소 비트 오율에 해당되도록 제어하도록 이루어진 것을 특징으로 한다. 이러한 본 발명에 의하면, 광 수신기의 문턱전압 제어를 통해 비트 오율 발생을 줄일 수 있으며, 간단하면서도 저렴하게 구현할 수 있는 효과가 있다
Abstract:
본 발명은 광통신 시스템의 다중 전송 속도를 갖는 듀오 바이너리 발생 시스템에 적용되는 가변 고차 베셀 저역 통과 필터를 제공하는데 그 목적이 있다. 본 발명은, 입력신호(Sin)와 출력신호(Sout) 사이에 직렬로 접속되고, 인덕턴스 제어신호에 의해 제어되는 복수의 가변 인덕터를 포함하는 가변 인덕터 회로부(310); 상기 가변 인덕터 회로부(310)의 복수의 가변 인덕터 각 연결노드에서 접지로 연결되고, 커패시턴스 제어신호에 의해 제어되는 복수의 가변 커패시터를 포함하는 가변 커패시터 회로부(320); 및 전송속도에 따라 사전에 설정된 설정값에 따라, 상기 가변 커패시터 회로부(320)의 복수의 가변 커패시터 각각에 커패시턴스 제어신호를 출력하고, 상기 가변 인덕터 회로부(310)의 복수의 가변 인덕터 각각에 인덕턴스 제어신호를 출력하는 커패시터/인덕터 제어부(330)를 포함하는 것을 특징으로 한다. 이러한 본 발명에 의하면, 데이터 전송속도가 변하는 경우에, 해당 전송속도에 가장 적합하게 필터 특성을 제어할 수 있도록 함으로써, 적용 범위를 확장시킬 수 있고, 또한 적용 시스템의 성능 및 효율을 향상시킬 수 있는 효과가 있다.
Abstract:
PURPOSE: An output optimizing method of an optical receiver using an FEC(Forward Error Correction) and an optical receiving system using the same are provided to minimize error correction generation probability of 0 bit and 1 bit and maximize efficiency and performance of an optical signal by optimizing a discrimination reference of 0 and 1 levels. CONSTITUTION: An FEC decoder extracts error information of receiving data(101). Error generation value of 1 bit and 0 bit are compared(102). Which one of 1 bit and 0 bit has a greater error generation value is determined(103,104). If the error generation value of 1 bit is greater than that of 0 bit, an optical receiver reduces a certain amount of reference voltage(105). If the error generation value of 0 bit is greater than that of 1 bit, the optical receiver increases a certain amount of reference voltage(106). When each number of error generation of 1 bit and 0 bit is the same, a current reference voltage is maintained as it is(107).
Abstract:
PURPOSE: A method for compensating the transition of the output wavelength of a light source is provided to formulate the transition state of the output wavelength of a light source through an experimental method, to estimate the transition extent of an output wavelength for varied input current by using the formula, to adjust temperature according to the estimated transition extent, and to compensate the transition of the output wavelength. CONSTITUTION: A user sets up the initial driving current and initial temperature of a light source according to a preset output light strength and a preset output wavelength(S101). The user obtains the correlation between the driving current and output wavelength of the light source at the initial driving temperature, and obtains the coefficients(a,b,c,d) of Formula 1, y=ax¬3+bx¬2+cx+d, using the correlation(S102,S103). Then the user obtains the correlation between the driving temperature and output wavelength of the light source at the initial driving current, and obtains the coefficients(e,f) of Formula 2, y=ez+f, using the correlation(S104,S105). In the case of resetting driving current, the user calculates a resetting output wavelength, based on resetting driving current, through Formula 1 and the difference between the initial output wavelength and the resetting output wavelength, based on the initial driving current. Then the user calculates the resetting driving temperature based on the wavelength difference and resets the driving temperature(S107-S111).
Abstract:
PURPOSE: An erbium-doped fiber amplifier is provided to be capable of maintaining an output optical strength of an existence channel from an optical fiber amplifier in a rapid time by compensating a gain in-homogeneity. CONSTITUTION: The first amplification stage(221,222,223,224,225) receives an input optical signal and forward and backward excitation lights and amplifies the input optical signal by an energy which is generated when erbium ions are excited by the excitation lights and are returned to an original energy level. A pre-process means performs a gain equalization process operation and an attenuation process operation of a light strength with respect to a signal amplified by the first amplification stage. The second amplification stage(271,272,273,274,275) receives a light signal processed by the pre-process means and the forward and backward excitation lights and again performs an amplification operation. A plurality of laser diodes generate a forward or backward excitation light needed for the first and second amplification stages, respectively. An input light signal detecting device(23) receives and separates a part of the input optical signal by a 50:50 ratio and converts one of separated signals into an electric signal via a filtering process for compensating a gain in-homogeneity and the other one into an electric signal without the filtering process. A laser diode controller(24) generates a forward laser diode control voltage of the first amplification stage using an output signal of the input light signal detecting device converted via the filtering process and the remaining laser diode control voltage using an output signal of the input light signal detecting device converted without the filtering process.