Abstract:
To provide a drive mechanism based on two tiny electric motors (27, 29), to drive the rotation of two outer display panels (21, 24) hinged to two inner hinged display panels (22, 23), each from one side. A groove is made in-between each hinged outer (21, 24) and inner panel (22, 23) for installing each motor (27, 29), while the inner panels are hinged together from their other sides. Two legs (37, 39) are installed on the shaft end of the motor (27, 29), each drive shaft will rotate one leg (37), which will rotate one outer panel (21, 24) 90°, while the inner panels (22, 23) will be dragged by the outer panels (21, 24) to fold or unfold with them 90° for each. In each mechanism, an assisting wire (44) is installed around the drive shaft to protrude down and out to assist in lifting up the fully unfolded panels (tablet configuration), while a spiral spring (41) is installed to provide a braking power against the skidding of the panels while unfolding.
Abstract:
To provide a storing, pulling, pushing, and guiding assisting kit (20) for accordion pleated car covers (22), as the cheapest, lightest, most practical, fastest, safest, and the smallest in size, over all of the other used mechanisms. The kit (20) compromises three tools of interrelated technical features: a U- shaped plastic storing box (21) opened from three sides, enveloped by fabric (31), and enclosing the fabric pleats (23), the pulling tool is a pulling arm (28) inserted longitudinally inside a pleats collecting tool (27), wherein the pleats collecting tool is enveloped by part of the top fabric (24) front end. The pulling arm (28) is used to pull the collecting tool (27) forward or backward, hence, the pleats (23) are extended to cover the vehicle, or pushed and collected back in-between the jaws (36) of the collecting tool (27), the box (21) is used to store the pleats collecting tool (27), the guide arm (28), and the fabric pleats (23) which are to be arranged in layers.
Abstract:
A most saving household ironing appliance in regards of time, safety, labor, and power, is made through building a combination of a disc-shaped iron apparatus (21) gliding up-down around a fixed and pressed fabric along a cylindrical ironing surface (23), driven by top mounted tubular motor (22), the set is to be called a Disciron (20). A set of smooth thin fabric belts and strips (25, 53) with elastic extensions inside slits made in the cylinder (23), are used to fix the cloths smoothly on the heat resistant cylinder (23). An electric control circuit is installed inside the Disciron (20) to control the timing of iron disc temperature and steam chamber preparation, then the start of steam exit in cooperation with the tubular motor (22) timed operation. The Disciron (21) is made compact and easily storable, by the use of a thin heat resistant sponge (51) supported by a compressible coil spring (52), and telescopic bars (54) carrying the tubular motor (22).
Abstract:
To provide a time saving washing machine (20) with multi-rotatable baskets to handle practically, efficiently, and economically a onetime process of washing/drying multi types of laundry (colored, white clothes and towels). The basin is divided into three (21, 22, 23), containing three baskets (24, 25, 26), one big (24) and two secondary (25, 26), the big basket is to be used for the biggest quantity of laundry. The baskets (24, 25, 26) agitators (27, 28, 29) are driven by one motor (41), the motor's output shaft drives the main agitator (27) directly, while it is driving the shafts of the secondary agitators (28, 29) through a drive belt connected to their pulleys. A centralized water feed line (30) and multi-cleaner compartments are installed to distribute the water and cleaner to the baskets (24, 25, 26). The baskets side walls have a wavy surface (56), to flex fabrics to move and turn in multi-directions, and to be exposed and penetrated repeatedly from all sides by the pumping water force and detergent solution.
Abstract:
To provide a time saving washing machine (20) with multi-basins to handle practically, efficiently, and economically a onetime process of washing multi types of laundry (colored, white clothes and towels). The basin is divided into three (21, 22, 23), one big (21) and two secondary (22, 23), the big basin is normally used for the bigger quantity of laundry (normally the colored clothes). The basins (21, 22, 23) agitators (25, 26, 27) are driven by one motor (38), the motor's output shaft drives the main agitator (25) directly, while it is driving the shafts of the secondary agitators (26, 27) through a drive belt connected to their pulleys. A centralized water feed line (28) and multi-cleaner compartments are installed to distribute the water and cleaner to the basins (21, 22, 23). The basins side walls have a wavy surface (53), to flex fabrics to move and turn in multi-directions and to be exposed and penetrated repeatedly from all sides by the pumping water force and detergent solution.
Abstract:
To provide a compact all in one tire (intire (20)) gathering multi-tires designs requirements inside it. Mainly the entire main features of the other designs are recreated and developed inside a conventional tire that is easily produced from the elastic rubber, polyurethane... to form a tire with a built-in main pneumatic portion (21) consisting of reinforced linings (30), reinforced web of elements (31) or single reinforced separate support pads (39, 41), and pneumatic portion (22) consisting of a secondary annular ring support (carcass). The main non- pneumatic (21) portion is enclosed in-between the tire's crown, 50-80 % sidewalls height, and the carcass of the secondary portion. Chambers (28) with suitable geometrical shapes bored inside the elastomeric main annular solid portion, having metallic embedded lining, or reinforced support pads (39, 41). While the secondary non-pneumatic portion from (22) the wheel rim side is designed to keep a suitable height of the tire's beads (23) required for removal and installation of the tire.
Abstract:
To provide an installable support ring inside nearly the whole cavity of the tire (20) without various complications in parts and procedures, a double-support ring (24) is designed by dividing it into two different annular pieces, one is installed inside the tire's cavity, the other is installed around the wheel rim. The tire's internal support ring (25), will set and fit around the rim's support ring (28). The rim's semi-flexible annular support (28) is having a geometrical holes (32) for solving and supporting physical requirements, the tire's inner support ring (25) is made of two annular flexible elastic sheets (26), with a curvature parallel to the tire's crown, and reaching the middle height of the tire, these sheets include an array of reinforced polyurethane pads (27). The design further supports the whole flat tire's side walls from a noticeable collapse to let it be driveable safely for longer distances and higher speeds than conventional types.
Abstract:
Transportation means do not have built-in retractable earpieces (20) assemblies, a design for a retractable earpiece, stored inside a pocket of the automobile door panel, and the seat armrest (24) in planes., is a solution. Earpiece (20) wire (25) from one end is attached to the tension reel (39) which is enclosing a developed design of a smaller size lightweight wavy spiral spring (40) biased to the retraction protective built-in housing, in a small size, that protect the earphones from being misplaced away. Pulling the wire (25) will rotate the tension reel (39) in a way that will create a two expansion motions for the spiral wavy spring (40), the two types of motion offers a shortened spring which saves space... Further a ratchet lock system (56) with cylindrical teeth and ratchet arm end is provided to cancel the use of the conventional release button.
Abstract:
A vehicle covering which rolls up, having fabric parts winded around a tubular roller with a built-in spring retarder; all these parts are installed inside a cylindrical housing, stored along the part of the space between the rear trunk lid and vertical double metal sheets, which is used as a built-in storage compartment (20), the housing (32) is secured to the inner side of the outer metal sheet (rotating gate). The fabric's front edge is connected to a guide-bar, connected to a pulling stick, if pulled, it unrolls the fabric to cover the whole vehicle top, and then its folded sides are pulled down and hanged, while if released, it will be pulled automatically over the vehicle through threads connected with the secondary spring retarder roller. When the top fabric is released, it is rolled back automatically with the fabric sides.