Abstract:
본 발명은 서비스 품질을 보장할 수 있는 차등화 서비스(Differentiated Service : DiffServ) 망에서 패스 및 링크 레벨 정보 데이터베이스를 이용한 수락 제어 방법 관한 것이다. 이러한 본 발명의 수락제어 방법은 대역폭 브로커에서 망에 속하는 각 노드들로부터 라우팅정보와 링크상태정보를 수신하여 링크 레벨 서비스품질 정보 데이터베이스를 생성하는 단계, 상기 링크 레벨 서비스품질 정보 데이터베이스를 기반으로 상기 대역폭 브로커에서 패스 레벨 서비스품질 정보 데이터베이스를 생성하는 단계, 상기 패스 레벨 서비스품질 정보 데이터베이스를 상기 대역폭 브로커에서 해당 에지 노드로 분산하는 단계 및 상기 패스 레벨 서비스품질 정보 데이터베이스를 저장하고 이를 이용하여 상기 에지노드에서 가입자의 접근 여부를 수락제어하고, 상기 에지노드의 수락제어에 대응하여 상기 대역폭 브로커에서 상기 링크 레벨 서비스품질 정보 데이터베이스를 이용하여 대역폭할당 여부를 수락제어하는 수락제어 수행단계를 � ��함한다. 이와 같이 대역폭 브로커가 생성하고 관리하는 링크 레벨 정보 데이터베이스에서 패스 레벨 정보를 추출하여 별도의 데이터베이스화한 다음, 이 정보를 DiffServ망을 구성하는 에지 노드에 다운로드하여 에지 노드를 통해 망에 접근하는 가입자의 수락 제어, 자원 할당을 패스 레벨 정보만을 가지고 수행하게 하므로써, 대역폭 브로커로의 신호 메시지 수의 감소 및 대역폭 브로커를 단순화시킬 수 있는 장점이 있다.
Abstract:
PURPOSE: A method for assigning labels using BGP(Border Gateway Protocol) table information in an MPLS(Multi Protocol Label Switch) network is provided to transmit information on a BGP table to an LDP(Label Distribution Protocol) block, and to assign labels to next hop information, thereby remarkably reducing label consumption. CONSTITUTION: A routing module operates each routing protocol, and obtains route information from a neighboring network(701). The routing module generates each routing table for each routing protocol including a BGP(702). The routing module scans each routing table, and selects an optimal path for each receiver(703). The routing module generates a routing information base including next hop information(704), and transmits the routing information base and information on a BGP table to an MPLS signaling module(705). The signaling module generates a label information base(706), and transmits information on the label information base to a forwarding table of a label switch(707).
Abstract:
1. 청구범위에 기재된 발명이 속하는 기술분야 본 발명은 차세대지능망 지능형정보제공시스템을 이용한 인터넷 호스트에서의 음성 서비스 제공 방법에 관한 것임. 2. 발명이 해결하고자 하는 기술적 과제 본 발명은 인터넷 망에 속한 인터넷 호스트를 사용하는 서비스 이용자에게 차세대지능망의 지능형정보제공시스템에서 지원하는 음성 서비스를 제공하기위한 방법을제공하고자 함. 3. 발명의 해결 방법의 요지 본 발명은 차세대지능망 지능형정보제공시스템을 이용한 인터넷 호스트에서의 음성 서비스 제공 방법에 있어서, 인터넷 호스트가 지능망 서비스를 요구하는 제1단계; 차세대 지능망 요소간에 서비스 제공을 위한 과정을 수행하는 제2단계; 지능형정보제공시스템과 인터넷-차세대지능망 베어러 관문국간 채널을 설정하는 제3단계; 및 인터넷 차세대지능망 베어러 관문국을 통해 인터넷 호스트에게 음성 서비스를 송신하는 제4단계를 포함함. 4. 발명의 중요한 용도 본 발명은 이용됨.
Abstract:
PURPOSE: A method for making the use of an intelligent peripheral(IP) on an advanced intelligent network(AIN) as an internet server is provided to offer an internet service as well as a typical service of intelligent network, by setting the function of the internet server at the IP so that the IP as the internet server can be accessed by an internet host connected to an internet. CONSTITUTION: An IP address is allocated to each component of intelligent peripherals(201). At this time, the IP addresses are allocated to a specialized resource main processor, a service switch point of the specialized resource and a specialized resource unit, in response to instructions via a console referring to an IP address allocation table. A routing protocol in a local area network(LAN) is activated in order to enable the intelligent peripherals to be operated as the components of the internet(202). A default rout of the main processor for the specialized resource is set in order to enable a transmission to the internet server and a reception from the internet server(203).
Abstract:
PURPOSE: A method for providing voice service in an internet host using the advanced intelligent network intelligent peripheral is to provide voice service for a user using an internet host. CONSTITUTION: An internet host(101) requests intelligent network service through an internet-AIN(Advanced Intelligent Network) control gateway(102)(201-202). A SCP(Service Control Point)(104) transfers INAP(Intelligent Network Application Protocol) initiate call attempt operation to a SSP(Service Switching Point)(105)(203). INAP continue operation is transferred to request the SSP(105) to continue call processing at DP(Detection Point)(204). INAP BCSM(Basic Call State Model) RRBE(Request Report BCSM Event) to request the SSP(105) to monitor call associated event(205). The SSP carries out call path setup to an internet-AIN(Advanced Intelligent Network) bearer gateway(103)(206). INAP BCSM event report(EventReportBCSM) operation is transferred to annunciate call associated event to the SCP(104)(207).
Abstract:
PURPOSE: An Internet subscriber loop back testing method in a full electronic exchanger is provided to find out a cause of a problem and cope with it by checking whether is a subscriber terminal problem or an exchanger system problem in case that an Internet call of an ISDN Internet subscriber is not normally set up in a TDX-10 ISDN. CONSTITUTION: An SIF(Subscriber Interface) link is assigned(301). It is checked whether the allocation is normal(302). If the allocation is abnormal, testing is discontinued(314). If the allocation is normal, a space switch is connected(303). It is checked whether the space switch connection is normal(304). If the space switch connection is abnormal, testing is discontinued(315). If the space switch connection is normal, a time switch is connected(305). It is checked whether the time switch connection is normal(306). If the time switch connection is abnormal, testing is discontinued(316). If the time switch connection is normal, a testing for transmitting and receiving an LCP request packet and an Ack packet among PPP protocols for Internet connection is performed(307). The testing result is checked(308). If the testing result is normal, it is displayed as 'OK'(309), while if it is abnormal, the testing result is displayed as 'NOK'(310). And then, the time switch connection is released(311), the space switch connection is released(312), and the SIF link allocation is released(313).
Abstract:
1. 청구 범위에 기재된 발명이 속한 기술분야 본 발명은 ATM 종단 장비를 이용한 LAN 트래픽 처리 방법에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 공중망 비동기 전달모드 교환시스템에서 비동기 전달모드 종단장비를 통해 LAN 서비스를 수행하기 위한 LAN 트래픽 처리 방법을 제공하고자 함. 3. 발명의 해결방법의 요지 본 발명은, 공중망 비동기 전달모드(ATM) 교환시스템에 적용되는 랜(LAN) 트래픽 처리 방법에 있어서, 비동기 전달모드(ATM) 종단 장비는 랜 서비스 요구를 수신하면 논리적인 주소를 물리적인 주소로 변경하기 위한 제 1 테이블을 검색하여 착신주소를 해결하거나 상기 제 1 테이블을 셋업한 메시지를 상기 공중망 비동기 전달모드(ATM) 교환시스템으로 전송하는 제 1 단계; 및 상기 공중망 비동기 전달모드(ATM) 교환시스템은 논리적인 주소를 비동기 전달모드(ATM) 종단 장비 주소로 변경하기 위한 제 2 테이블을 검색하여 착신 가입자 주소를 해결한 후에 상기 제 1 테이블의 갱신을 요구하고 호 처리를 수행하는 제 2 단계를 포함한다. 4. 발명의 중요한 용도 본 발명은 공중망 ATM 교환시스템에 이용됨.
Abstract:
CDMA 이동통신 시스템에서 데이타 서비스시 셀내의 이동단말기의 수를 파라미터로 삼아 채널을 모의실험(시뮬레이션)하고, 모의실험 결과에 따라 오류제어 기법의 성능을 분석할 수 있도록 한 CDMA 이동통신 시스템에서 오류제어기법의 성능 분석을 위한 시험방법이 개시된다.
Abstract:
본 발명은 CDMA(Code Division Multiple Access) 이동통신 시스템에서 데이터 서비스시 서비스품질(QOS:Quality of Service)을 만족시키고 시스템 성능을 향상시킬 수 있는 오율특성을 이용한 데이터 프레임 전송 방법에 관한 것으로서, 해당 셀내의 이동단말기의 수를 읽어 해당 셀내의 이동단말기의 수와 인접 셀의 이동단말기 수의 비율, 그리고 프로세싱 이득 값 등을 이용하여 오율특성을 산출하는 제1단계(100,101); 및 상기 제1단계(100,101)에서 산출된 오율특성을 해당 셀내의 모든 이동단말기로 전송하고, 현재 셀내의 모든 이동단말기는 전송되어온 상기 오율특성을 확인하여 오율특성에 따른 프레임 길이를 설정한 후, 기지국으로 설정된 프레임 길이로 데이터 프레임을 전송하는 제2단계(102 내지 104); 를 포함하여 오류가 발생할 확률을 감소시켜 신뢰성 있는 데이타의 전송을 수행할 수 있으며, 전체 시스템의 전송 효율울 높임으로써 보다 양질의 서비스를 제공할 수 있는 효과가 있다.