Abstract:
PROBLEM TO BE SOLVED: To provide an LED media facade with an error recovery function capable of recovery from malfunction due to an external environmental factor and recovery from malfunction due to a boot error.SOLUTION: The LED media facade includes: a main controller which divides and outputs video data transmitted from a computer; a plurality of sub-controllers which output data signals outputted from the main controller synchronously with a clock signal supplied from the outside; LED bars connected in series, which receive the clock signal and the data signals; and an error check unit which samples the clock signal outputted from one of the LED bars connected in series and detects an error of the sampled clock signal.
Abstract:
PROBLEM TO BE SOLVED: To provide a manufacturing apparatus with which the reliability of a product is enhanced by preventing the generation of wrinkles on the top surface of a square neck-in can vessel, and also the time required to manufacture the square neck-in can vessel is reduced, and to provide a method of manufacturing the square neck-in can vessel. SOLUTION: The manufacturing apparatus includes: a rectangular or square external die 100 which has a prescribed depth on a plate surface, and has a containing groove 110 whose peripheral surface is formed inclining; and an internal die 200 having a surface which is in contact with the peripheral surface of the containing groove 110 and is inclined so as to correspond to the peripheral surface, and contained in the containing groove. COPYRIGHT: (C)2009,JPO&INPIT
Abstract:
PROBLEM TO BE SOLVED: To provide a transmission for transmitting a driving force of all transportation equipment of a prime mover type or non-prime mover type such as a two-wheel to four-wheel cycle and vehicle, and a cycle equipped with a power transmission unit using the transmission. SOLUTION: Driving force is related to a fine speed changer of a differential reduction gear system, a rough speed changer of an inner contact reduction gear system and an output section of an intersecting axle power transmission system, arbitrarily and selectively by a chain-less method by using a shift lever, to finely change speed multi-stepwise in each of rough speed change stages for low/high speed. COPYRIGHT: (C)2009,JPO&INPIT
Abstract:
PROBLEM TO BE SOLVED: To provide a luminescence pen which has a simple structure, decreases failure occurrence, keeps two luminescence sections embedded in an LED unit, and lightness excellent, prevents shadow from occurring, and makes operation of on-off easier than with a luminescence pen of a conventional mechanical type switching device. SOLUTION: An LED 5b which keeps two luminescence sections 11a embedded and emits light is attached on the tip opening of a pen body which stores a mechanical pencil for note and a ball-point pen core, a negative pole of this LED unit 5b is directly connected to a battery 9 through an internal metal sheet, spring or the like of a pen, a positive pole is connected to an IC substrate 8 between an LED unit 5b and the battery 9, and on-off is carried out by a sense of a touch sensor 1a. COPYRIGHT: (C)2008,JPO&INPIT
Abstract:
PROBLEM TO BE SOLVED: To provide an earthquake-resistant anchor nut sleeve to be used for an anchor nut used for setting a panel (particularly, ceramic panel) or the like on a wall surface of a concrete structure, which can firmly fix the anchor nut at a set position without separation from a groove of the panel by accurately and easily inserting the sleeve in a space between the outer circumferential surface of the anchor nut and the groove of the panel and, particularly, efficiently absorb and remove an external impact such as vibration (earthquake) so that the panel is never dropped from an outer wall of a building. SOLUTION: This anchor nut sleeve 1 which is inserted to the space between the anchor groove 3 of the panel 12 and the outer circumference of the anchor nut 4 to fix the anchor nut 4 is composed of a spring. COPYRIGHT: (C)2008,JPO&INPIT
Abstract:
PROBLEM TO BE SOLVED: To inform a user of damage of a product with a temperature sensor using a shape memory alloy because the temperature sensor made of the shape memory alloy and a separation member comprising a strip unit having an aggregate of many staples is separated by a stapler, is fixed to a solid container made of glass or the like, and has a second shape below a critical temperature, but, above or at the critical temperature, the temperature sensor has a first shape, is separated from the product, and displays alarm information of the product, and to provide a manufacturing method of the temperature sensor. SOLUTION: This temperature sensor 10 using the shape memory alloy comprises the strip unit 2 having the aggregate of U-shaped individual staples having both legs 3 and 4, and has a predetermined first shape at the critical temperature or more or has an arbitrary second shape at the critical temperature or less.