Abstract:
본 발명에 따른 위치추적 관리 시스템은 추적 단말에서 목표 단말로 이동하는 경로를 탐색하는 경로추적 시스템에 있어서, 수신된 위치정보 요청에 기초하여 자신의 위치 정보를 전달하고, 수신된 추적 단말의 위치 및 도착 예정 시간을 표시하는 목표 단말, 목표 단말로 이동하기 위한 경로추적 수단, 수신된 목표 단말의 위치 정보 및 자신의 위치에 기초하여 목표 단말로 이동하기 위한 경로를 탐색하고, 탐색된 경로 및 도착 예정 시간을 목표 단말로 전달하는 추적 단말 및 수신된 위치 정보에 포함된 GPS 정보 또는 목표 단말이 연결된 기지국의 위치 정보 중에서 어느 하나를 포함하는 목표 단말의 위치 정보를 추적 단말로 전달하는 위치추적 관리 서버를 포함한다.
Abstract:
PURPOSE: A flow based mobility supporting apparatus and method thereof are provided to support mobility and location registration based on a flow for a multi-mode terminal including plural wire and wireless network interfaces. CONSTITUTION: A handover control agent(30) registers and creates binding entry for a flow(203). The handover control agent registers a location for the flow in a mobility information control server(20)(205). The mobility control server updates or registers a binding entry for the flow(215). A multi-mode terminal(10) executes handover based on the location registered flow. The multi-mode terminal transmits data.
Abstract:
PURPOSE: A multimode terminal and control method thereof are provided to support handoff without connection of an application and to use a plurality of physical network interfaces while maintaining unique IP address. CONSTITUTION: A PNI(Physical Network Interface)(240) is connected to access networks. A VI(Virtual Interface) module(260) connects the PNI and a network module(230). A priority list of selected physical network interfaces is generated. An IM(Interface Management) module(270) controls in order to connect a physical network interface and the network module.
Abstract:
본 발명은 차세대 지능망(AIN)에서 지능형 정보제공 시스템(IP)이 서비스 이용자에게 음성 안내, 음성 녹음, 디지트 수집 기능을 제공하는데 필요한 특수 자원 보드를 고장으로 인해 교체 필요시, 보드를 탈장하고 실장하기 위한 방법에 관한 것이다. 먼저, 시스템이 시작된 후 운용자로부터 보드 탈장을 위한 비활성화 명령어를 입력받으면 보드 비활성화 처리를 하고, 그 결과를 운용자에게 통보한 후, 보드 비활성화 결과를 검사하여 비정상이면 운용자는 보드를 탈장하지 않고, 정상이면 운용자는 보드의 전원을 오프(OFF)하고 탈장한다. 한편, 보드 실장을 위해 운용자가 보드를 먼저 실장하고 전원을 온(ON)한 후, 운용 단말에서 보드를 활성화하는 명령어를 입력 받으면 보드 활성화 처리를 하고, 그 결과를 운용자에게 통보한다. 이와 같이 수행함으로써, 본 발명에서는 운용 중인 시스템의 작동에 영향을 주거나 보드가 망가지는 것을 방지할 수 있으며, 또한 실장할 때 시스템이 감지하도록 함으로써 시스템 중단 없이 실장된 보드가 서비스에 이용되도록 할 수 있다.
Abstract:
PURPOSE: An Internet subscriber loop back testing method in a full electronic exchanger is provided to find out a cause of a problem and cope with it by checking whether is a subscriber terminal problem or an exchanger system problem in case that an Internet call of an ISDN Internet subscriber is not normally set up in a TDX-10 ISDN. CONSTITUTION: An SIF(Subscriber Interface) link is assigned(301). It is checked whether the allocation is normal(302). If the allocation is abnormal, testing is discontinued(314). If the allocation is normal, a space switch is connected(303). It is checked whether the space switch connection is normal(304). If the space switch connection is abnormal, testing is discontinued(315). If the space switch connection is normal, a time switch is connected(305). It is checked whether the time switch connection is normal(306). If the time switch connection is abnormal, testing is discontinued(316). If the time switch connection is normal, a testing for transmitting and receiving an LCP request packet and an Ack packet among PPP protocols for Internet connection is performed(307). The testing result is checked(308). If the testing result is normal, it is displayed as 'OK'(309), while if it is abnormal, the testing result is displayed as 'NOK'(310). And then, the time switch connection is released(311), the space switch connection is released(312), and the SIF link allocation is released(313).
Abstract:
1. 청구 범위에 기재된 발명이 속한 기술분야 본 발명은 광대역 전달 능력(Broadband Bearer Capability) 정보요소 필드의 파라미터 설정 방법에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 서비스 품질(Quality of Service : QoS)을 보장해주기 위해 ITU-T Q.2931에서 정의한 셋업 메시지내의 광대역 전달 능력 정보요소 필드의 파라미터 설정 방법을 제공하고자 함. 3. 발명의 해결방법의 요지 본 발명은, 공중망 ATM 교환시스템에서 상대방 착신측을 IP 헤더의 착신측 IP 주소로 구별하고, 각각의 응용 프로그램을 TCP/UDP 헤더의 발신측 포트를 이용하여 구별함으로써, 발신측 포트로 구별된 응용에 따라 서로 다른 파라미터 매핑을 통해 서로 다른 망 특성을 가지는 서비스들의 품질을 보장할 수 있다. 4. 발명의 중요한 용도 본 발명은 공중망 ATM 교환시스템에 이용됨.