Abstract:
본 발명은 이중 공진형 안테나에 대한 것이다. 본 발명에 의하면, 두 개의 주파수 영역을 사용하는 시스템에서 낮은 주파수 대역에서의 이득 특성 보장을 반파장 위상 변환기를 이용하여 고이득 특성을 가지도록 선형 배열방식으로 구성되는 안테나를 중심으로, 높은 주파수 보장을 위한 판 형태의 모노폴 안테나가 대칭형으로 구성되도록 하여, 두 개의 주파수 영역에서 동일한 이득 특성을 가지고 동작할 수 있게 함으로써, 안테나 설치 비용을 줄이고, 동일한 서비스 제공이 가능하도록 한다.
Abstract:
본 발명은 무선 랜 시스템에서 잔류 주파수 오프셋(offset)을 보상하는 장치 및 그 방법에 관한 것이다. 본 발명에서는, 잔류 주파수 오프셋을 보상하기에 앞서 무선 랜 시스템의 송신단으로부터 수신하는 제1 OFDM 심볼에 대해 채널 보상을 먼저 수행한 후, 채널 보상이 이루어진 제1 OFDM 심볼의 위상 오차 추정값에 따라 샘플링 주파수 오프셋을 계산한다. 이때, 본 발명은 바이어스 주파수 오프셋도 함께 계산하여 이후에 들어오는 제2 OFDM 심볼의 샘플링 주파수 오프셋 보상시 바이어스 주파수 오프셋도 함께 보상될 수 있도록 한다. 이는 곧, 잔류 주파수 오프셋을 점차적으로 줄여나가 무선 랜 시스템의 성능을 개선할 수 있도록 할 뿐만 아니라, 채널 보상을 먼저 수행한 후 잔류 주파수 오프셋 보상을 추후에 수행함으로써, 안정적인 시스템 구현을 할 수 있다.
Abstract:
본 발명은 근거리 무선 패킷 통신 시스템을 위한 다중 경로 획득 장치 및 그 방법에 관한 것이다. 이 다중 경로 획득 장치의 바커 코드(Barker Code) 역확산기는 수신 신호와 바커 코드의 상호 상관을 수행하여 상호 상관 함수값을 산출한다. 덧셈기는 바커 코드 역확산기에서 산출된 상호 상관 함수값을 각 샘플 위치에 대해 더하여 출력하고, 확장기는 덧셈기에서 출력되는 덧셈 결과를 특정 길이로 확장하여 출력한다. 평균값 산출 및 비교기는 확장기에서 출력되는 결과값을 전체 추정 심볼 수에 대해 평균하여 특정 임계값과 비교한 비교 결과를 출력하고, 최대값 위치 검출기는 평균값 산출 및 비교기에서 출력되는 비교 결과로부터 특정 임계값보다 큰 값 중 최대 크기 값을 갖는 샘플 위치를 파악하여 다중 경로를 검출한다. 본 발명에 따르면, CCK 방식의 무선 LAN 시스템의 수신기에서 통신 채널에 대한 정확한 정보가 획득되며, 이로 인해 최적의 전송 효율로 동작될 수 있다. 또한, 다중 경로 획득 과정에서 성능을 유지할 수 있고, 구현의 복잡도가 간소화될 수 있다.
Abstract:
본 발명은 직교주파수 분할 다중화에서의 등화 시스템 및 그 방법에 관한 것이다. 직교주파수 분할 다중화에서의 등화 시스템 및 그 방법은, 수신 신호에서 순환 전치(CP)를 제거하고, 고속 푸리에 변환(Fast Fourier Transform, FFT) 연산을 수행한 후 각 부반송파별로 부반송파 간의 간섭(Inter-Carrier Interference, ICI)과 심벌간 간섭(Inter-Symbol Interference, ISI)을 제거하여 채널 등화를 수행하고, 이렇게 채널 등화된 심벌을 이진 데이터 신호로 처리하여 원래 데이터로 복구하도록 한다. 이와 같이 하면, 채널의 지연 확산이 CP의 길이보다 길어질 경우에 이전 심벌의 영향에 의한 심벌간이 간섭과 부반송파 간의 간섭으로 인한 성능 저하를 방지할 수 있고, 긴 지연 확산을 갖는 채널에서 CP의 길이를 길게 하지 않고도 등화기의 성능을 유지할 수 있으며, 등화기의 연산이 간단해질 수 있다.
Abstract:
PURPOSE: A method for estimating the channel quality and applying the link of the orthogonal frequency divisional multiplexing wireless communication system and an apparatus for the same are provided to improve the data transmission throughput as well as to increase the usage time through the effective transmission power operation. CONSTITUTION: An apparatus for estimating the channel quality and applying the link of the orthogonal frequency divisional multiplexing(OFDM) wireless communication system includes an analog/digital converter(121), a protection period cancel block(122), a fast Fourier converter(123), a channel quality estimator(126) and a link adaptor(127). The analog/digital converter(121) converts the signal received from the outside into the digital signal. The protection period cancel block(122) removes the protection period from the converted digital signal. The fast Fourier converter(123) converts the protection period cancelled signal into the signal of the frequency region. The channel quality estimator(126) measures the quality of the channel considering the signal to noise and the delay diffusion by using the converted digital signal and the signal of the frequency region. And, the link adaptor(127) performs the link adaptation by selecting the parameter including the transmission power, the data modulation method and the transmission speed by using the protocol to identify the normal data transmission in the data transmission terminal and the reception terminal.
Abstract:
본 발명은 확대된 서비스 영역을 제공하는 직교 주파수 분할 다중 방식의 무선 랜 송, 수신 시스템 및 그 방법에 관한 것이다. 본 발명에 따르면, 송신 시스템은, 짝수 번째 시간에 제1 OFDM 변조를 수행하고, 홀수 번째 시간에 제1 OFDM 변조된 심볼의 각 부반송파의 위치를 FFT 포인트의 1/2 순환 이동시킨 제2 OFDM 변조를 수행한다. 그리고 제1 OFDM 변조 및 제2 OFDM 변조에 따른 복수의 시그널 필드로 이루어진 송신 프레임을 전송한다. 수신 시스템은, 수신 프레임의 포맷 구조를 확인하여 OFDM 심볼 변조가 반복 프레임인지 여부를 판단한다. 판단 결과, 시그널 필드가 반복되지 않은 프레임인 경우 그에 해당하는 복조를 수행한다. 판단 결과, 시그널 필드가 반복된 프레임인 경우, 제1 비트 할당 정보를 이용한 시그널 필드의 복조 및 제1 비트 할당 정보의 1/2인 제2 비트 할당 정보를 이용한 시그널 필드의 복조를 수행한다. 그리고 복조된 시그널 필드에 따른 데이터 필드의 복조를 수행한다. 무선 LAN, OFDM, 다이버시티, 커버리지 확대
Abstract:
본 발명은 무선 랜 시스템의 채널 변화에 따른 채널 추정 방법, 이를 구현하는 채널 추정 장치 및 수신 장치에 관한 것이다. 본 발명에 따르면, 채널 추정부가 FFT 연산된 수신 심볼과 복원된 이전 수신 심볼을 이용하여 순간 채널 추정을 수행한다. 이때, 복원된 이전 수신 심볼은 복조된 심볼에 대해 길쌈 부호화, 인터리빙 및 매핍 과정을 재수행하여 송신 심볼로 다시 복원된 수신 심볼이다. 즉 복조된 심볼을 복원하여 수신 심볼과 비교한 순간 채널 추정을 반복하여, 이러한 반복된 순간 채널 추정에 따라 갱신된 채널 추정 정보를 이용하여 채널 등화가 이루어진다. 또한, 전송률에 따른 동적인 지연값을 이용하여 순간 채널 추정 및 채널 등화를 수행한다. 따라서, 복원된 이전 수신 심볼의 채널 추정 값을 이용하여 채널을 추정하므로 고속 이동성에 의한 채널 변화가 추적 가능하고 채널 추정시 전송률에 따른 동적인 지연 구조를 가지므로 무선 랜 시스템에서 수신 처리 지연이 패킷 간 짧은 간격(SIFS : Short Inter Frame Space)을 만족하여 시스템 성능이 더욱 향상된다. 무선 랜, IEEE 802.11a, IEEE 802.11p, 채널 추정
Abstract:
본 발명은 다중 대역 또는 다중 안테나 전송 모드에서 높은 데이터 전송률과 호환성을 제공하는 송수신 장치 및 그 방법에 관한 것이다. 본 발명에 따른 데이터 송신 방법은, 소스부에서 생성된 데이터를 적어도 하나의 대역에 분배하는 단계; 상기 대역마다 분배된 데이터에 대해 오류 정정을 위한 부호화를 수행하는 단계; 상기 부호화된 데이터를 적어도 하나의 안테나에 분배하는 단계; 상기 안테나마다 분배된 데이터에 대해 부반송파를 할당하고 역푸리에 변환을 수행하는 단계; 상기 부반송파에 대응하는 쇼트 프리앰블 제 1 롱 프리앰블을 생성하는 단계; 데이터의 전송모드에 기초하여 시그널 심벌을 생성하는 단계; 및 상기 전송 모드가 MIMO-OFDM 전송 모드인 경우, 상기 시그널 심벌과 데이터 필드 사이에 사용하지 않는 부반송파의 채널 추정을 위한 제 2 롱 프리앰블을 부가하여 프레임을 생성하는 단계를 포함한다. 본 발명의 구성에 따르면, 상기 제 2 롱 프리앰블을 이용하여 제 1 롱 프리앰블에서 사용하지 않는 부반송파의 채널 추정을 수행하고, 상기 시그널 심벌이 포함하는 전송 모드 정보에 기초하여 수신기가 적응적으로 데이터를 수신할 수 있다. MIMO, OFDM, SDM, STBC, 프레임, 시그널 심볼, 프리앰블
Abstract:
A modem for a wireless communication system, a transmitting apparatus using the same, and a method for controlling transmission power thereof are provided to extend a signal arrival distance through power control and improve throughput performance. A modem unit(100) demodulates signals inputted through a multi-antenna or a single antenna into plural digital signals, and outputs them through a transmission path. A transmission controller memory(400) receives information of an input signal inputted from the modem unit(100), stores mode information of the input signal, and stores a look-up table in which information for power control corresponding to each mode is stored. A transmission power controller(500) receives information corresponding to a mode of the input signal from the look-up table and controls transmission power of the input signal desired to be transmitted based on the received information.
Abstract:
A detector of a reception end of a wireless communication system is provided to solve a problem of the related art MIMO(Multi-Input Multi-Output) detector that uses V-BLAST(Vertical Bell-Laboratories Layered Space-Time) which has a considerably high complexity of implementation. A determinant calculating unit(100) obtains the first detect signal by using a channel transfer function included in a transmission signal and the received first nulling matrix, and generates a determinant for obtaining a nulling matrix by using the first detect signal and the channel transfer function. The first channel state calculating unit(200) obtains the first nulling matrix by using the determinant, and calculates the first channel state information value by using a nose component of the transmission signal, the channel transfer function and the determinant. The second channel state calculating unit(300) obtains the second nulling matrix by using the determinant and the transmission signal, obtains the first detect signal by using the second nulling matrix and the channel transfer function, and calculates the second channel state information value by using the noise component, the channel transfer function and the determinant.