Abstract:
본 발명은 무선통신 시스템의 다중모드 기지국 및 그 제어방법에 관한 것이다. 이를 위하여 본 발명은, 제어국의 제어에 의해 통신규격 별로 배정되는 자원을 변경하는 다중모드 기지국에 있어서, 통신규격에 대한 자원을 제공하며, 적어도 하나의 통신규격에 따라 동작하는 복수의 채널카드, 복수의 채널카드에 대한 정보를 수집하는 정보 수집 모듈, 정보 수집 모듈에서 수집한 복수의 채널카드에 정보를 제어국으로 전송하며, 제어국으로부터 자원 재배정 신호를 수신하여 소프트웨어 재구성 모듈을 제어하는 기지국 제어 프로세서 및 기지국 제어 프로세서의 제어에 따라 복수의 채널카드 중 적어도 하나의 채널카드가 동작하는 통신규격을 변경시키는 소프트웨어 재구성 모듈을 포함한다. 본 발명에 의하면, 하드웨어의 활용도를 높여 보다 경제적으로 다중모드 기지국을 운용할 수 있다. 다중모드, 기지국, 제어국, SDR, 동작모드
Abstract:
본 발명은 직교 주파수 분할 다중(OFDM) 시스템에서 시변 채널에서의 채널 추정 방법에 관한 것이다. 본 발명은 시변 채널을 추정하기 위해서 프리앰블(Preamble)을 이용해 얻은 채널의 초기치를 이용한다. 이와 같이 하면, 간단하면서도 빠르게 시변 채널을 추정할 수 있으며, 시간축에서 채널을 추정함에 따라 잡음을 줄이는 효과를 볼 수 있어 추정 성능이 향상된다. OFDM, 채널 추정, 시변 채널
Abstract:
본 발명은 직교주파수 분할 다중 접속(Orthogonal Frequency Division Multiple Access, OFDMA) 방식을 사용하는 이동형 데이터 통신 시스템의 하향 링크 프레임 구조 설계에 이용될 수 있는 OFDMA 신호 방식을 위한 하향 링크 프레임 구성 방법에 관한 것이다. 이 하향 링크 프레임을 구성하기 위해 먼저 하향 링크 프레임의 앞부분에 하나의 프리앰블을 배치하고, 프리앰블 다음에 복수의 데이터 심벌을 배치한다. 다음, 하향 링크 프레임 전반에 걸쳐 일정 구간 주기로 반복해서 상기 데이터 심벌들 사이에 복수의 파일럿 심벌을 삽입한다. 본 발명에 따르면, 프리앰블과 파일럿 심벌을 이용한 빠른 채널 변화를 추적 가능하게 하며, 또한 인접 셀 간의 간섭이 최소화 및 평준화되도록 함으로써 주파수 재사용률을 1로 하여 다수의 셀의 배치 설계를 용이하게 할 수 있다.
Abstract:
PURPOSE: An interleaving/deinterleaving device in a communication system using channel reciprocity is provided to transmit bits having high priorities to a part where delay between an uplink and a downlink is small, and to transmit bits having low priorities to a part where the delay is big, thereby reducing error rates of the bits having the high priorities. CONSTITUTION: An encoder(31) encodes inputted data bits. Interleavers1 and 2(32,33) distinguish the encoded bits into bits having high priorities and bits having low priorities, and interleave the distinguished bits, respectively. A multiplexer(34) multiplexes the encoded bits having the high priorities in a part highly correlated to an uplink, and multiplexes the bits having the low priorities in a part lowly correlated to the uplink. A modulator(35) modulates the bits multiplexed through the multiplexer(34).
Abstract:
PURPOSE: A wireless connection device for a multimedia service and a method therefor are provided to construct a TDD(Time Division Duplex) type wireless private network in a limited area using one public communication portable phone and receive a voice telephone call and an Internet service using the wireless private network. CONSTITUTION: A channel management device(210) initializes mobile terminals(110,120,130), transmits and receives subscriber association information with the mobile terminals(110,120,130), and processes the access and paging of the mobile terminals(110,120,130). A wired network interface device(220) connects to an external network and converts a signal transmitted and received to a TDD type mobile terminal. A system control unit(230) connects to the channel management device(210) and the wired network interface device(220), processes a call, manages the registration and state of subscribers, and manages and controls each device.
Abstract:
PURPOSE: A device for estimating a channel in a time division bidirectional communication system is provided to use a channel estimating method from a chip unit, a symbol unit, and a time slot, thereby minimizing an error caused during channel estimation. The device is provided to use a simple averaging method, thereby reducing random FM phenomenon caused by a channel estimating error. CONSTITUTION: A converter(100) receives a transmitted RF signal, and converts the signal into a baseband signal. A matching filter(200) filters the converted signal. A multiplier(300) multiples a signal sampled by a sampling period with chip units from the filtered signal by a midamble sequence for I and Q codes. An adder(400) adds signals as many as all midamble chips from the multiplied signal. An accumulator(500) divides the added signals as many as the number of the midamble chips, and obtains an average value. A channel estimating calculator(600) calculates a channel estimating value through consecutive two time slots or one-time slot from output values of the accumulator(500).
Abstract:
PURPOSE: A rate matching apparatus of a data communication system and a method thereof are provided to match channel-encoded symbols with a transmission rate appropriate for a physical layer to transmit. CONSTITUTION: According to the rate matching apparatus in a digital communication system, a channel encoder unit(220) performs a channel encoding as to input information bits. A multiplexer unit(260) performs a time division multiplexing as to symbols channel-encoded by the above channel encoder unit regularly. A parameter converter unit(1440) provides input parameter value required in the transmission rate matching. And a transmission rate matching unit(1430) reproduces symbols as much as appropriate for a physical layer by puncturing or repetition as to multiplexed channel encoded symbols and then matches them with a transmission rate appropriate for the physical layer to transmit, according to the above input parameter value.
Abstract:
복수의 기지국 사이에서 단말 분포현황 및 자원 운용현황 등의 정보를 적절하게 공유함으로써, AMC 기법의 효율성을 높일 수 있는 데이터 전송 방법이 제공된다. 기지국에 등록된 단말로부터 수신한 단말의 위치 정보, 채널 상태 정보, 그리고 MCS 레벨과, 인접 기지국에서 수신한 단말 분포현황 및 자원 운용현황을 기반으로 데이터 전송률의 MCS 레벨을 결정함으로써, 시스템 효율을 향상시킬 수 있다.