公开(公告)号：WO2013076711A3

公开(公告)日：2014-01-23

申请号：PCT/IB2013000323

申请日：2013-03-07

Applicant: ALSHDAIFAT WASFI ,  ALMUHAIRBI EIDA

Inventor： ALSHDAIFAT WASFI ,  ALMUHAIRBI EIDA ,  KASSAB FARAH AFIF

IPC: A47L1/02 ,  E04G23/00

CPC classification number: A47L1/02 ,  A47L3/04 ,  A47L2201/00 ,  B05B13/005 ,  B64C39/024 ,  E04G23/002

Abstract: To provide an effective, safe, time and labor saving aeropotic glass cleaner (20) apparatus, depending mainly on a mini helicopter (21) to move up/down opposite to the glass to be cleaned. Three apparatuses (20) stored in each cabover truck (23) container, that includes also the fluid supply tank, fluid pump, and batteries (32), in addition to a control pannel, in the truck cabin, to monitor/control remotely the cleaning process. It further consists of a water distribution block (50) on the ground, 2-way motor (53) with pulleys releasing the fluid hoses and the electric/data cable to the mini helicopter (21), toproof mounted U-shaped frame (41) with 2-way motor (38), and pulleys for releasing the safety ropes to the mini helicopter (21), a reciprocating cleaning brush (28) with rinse/compress mechanism, cameras, distance sensors, wind meter, speed sensors, cotrol unit (55).. all to control the cleaning process of the apparatus (20) which is capable to clean facades with protruded vertical parts, curving inwards or outwards.

Abstract translation: 提供一种有效，安全，省时省力的空气玻璃清洁器（20）装置，主要取决于微型直升机（21），以与要清洁的玻璃相对上/下移动。 存储在每个卡车（23）容器中的三个装置（20），其还包括流体供应箱，流体泵和除卡车舱内的控制通道之外的电池（32）以远程监视/控制 清洗过程。 它还包括地面上的配水块（50），具有将流体软管和电/数据电缆释放到迷你直升机（21）的滑轮的双向马达（53），开顶的安装的U形框架（41） ）和用于将安全绳释放到迷你直升机（21）的滑轮，具有冲洗/压缩机构的往复式清洁刷（28），照相机，距离传感器，风力计，速度传感器，cotrol 单元（55）...以控制能够利用突出的垂直部分来清洁正面的设备（20）的清洁过程，向内或向外弯曲。

公开(公告)号：WO2013024365A3

公开(公告)日：2013-11-07

申请号：PCT/IB2012002729

申请日：2012-12-14

Applicant: ALSHDAIFAT WASFI ,  ALMUHAIRBI EIDA

Inventor： ALSHDAIFAT WASFI ,  ALMUHAIRBI EIDA

IPC: D06F31/00 ,  D06F23/04 ,  D06F37/30

CPC classification number: D06F37/40 ,  D06F13/02 ,  D06F31/00 ,  D06F37/14 ,  D06F39/028 ,  D06F39/083 ,  D06F39/088

Abstract: A multiple rotatable baskets washing machine (20) is provided with active added mechanism, and basins (21), (22), (23) inner walls modifications, to handle a onetime process of washing/drying multiple types of laundry. The basins (21), (22), (23) agitators (27), (28), (29) are driven by one motor (41), the motor (41) also drives an active added mechanism, which is compromised from a center shaft (59) and lower and upper gears (58), (60), the upper gear (60) will be engaged with a ring gear (61), (62), (63) installed at the middle outer perimeter of each of the three baskets (24), (25), (26) to rotate it in a counter- direction of the agitators rotation directions. A centralized water feed line (30) and multiple cleaner compartments (37), (38), (39) are installed to distribute the water and cleaner to the basins (21), (22), (23). The basins side walls have a horn like protruding obstacles (70), to flex, move and turn the fabrics in multiple directions, so that it is exposed to and repeatedly penetrated by the pumping water's force and detergent solution from all sides.

Abstract translation: 为了处理洗涤/干燥多种类型的衣物的一次性过程，多旋转篮式洗衣机（20）设置有主动添加机构和盆（21），（22），（23）内壁进行修改。 （21），（22），（23）搅拌器（27），（28），（29）由一个电动机（41）驱动，电动机（41）也驱动有源附加机构， 中心轴59以及下部齿轮58和上部齿轮60上时，上部齿轮60将与安装在中间齿轮60的中间外周处的环形齿轮61,62,63啮合， 三个筐（24），（25），（26）中的每一个以搅拌器旋转方向的相反方向旋转。 一个集中式供水管线（30）和多个清洁室（37），（38），（39）被安装成将水和清洁剂分配到盆（21），（22），（23）。 盆的侧壁有一个像凸起的障碍物（70）的角，以便在多个方向上弯曲，移动和转动织物，使其从各个方向暴露并反复穿过泵水的力和洗涤剂溶液。

公开(公告)号：WO2013076712A3

公开(公告)日：2013-05-30

申请号：PCT/IB2013/000515

申请日：2013-03-19

Applicant: ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida

Inventor： ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida ,  KASSAB, Farah, Afif

IPC: A47L1/02 ,  E04G23/00

Abstract: To provide an effective, safe, time and labor saving aeropotic glass cleaner (15) apparatus, depending mainly on a top-wing (21) mini-aircraft (16) moving up/down opposite to the target glass. Three apparatuses (15) stored in each cabover truck (18) container, which includes also the fluid supply tank, fluid pump, and batteries (26), in addition to a control pannel, in the truck cabin, to monitor/control remotely the cleaning process. It further consists of a water distribution block (50) on the ground, 2-way motor (53) with pulleys releasing the fluid hoses and the electric/data cable to the mini-aircraft (16), toproof mounted U-shaped frame (41) with 2-way motor (38), and pulleys for releasing the safety ropes to the mini-aircraft (16), a reciprocating cleaning brush (23) with rinse/compress mechanism, cameras, distance sensors, wind meter, speed sensors, cotrol unit (55).. all to control the cleaning process of the apparatus (15) which is capable to clean facades with protruded vertical parts, curving inwards or outwards.

公开(公告)号：WO2012164408A2

公开(公告)日：2012-12-06

申请号：PCT/IB2012/002007

申请日：2012-10-09

Applicant: ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida ,  KASSAB, Farah, Afif

Inventor： ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida ,  KASSAB, Farah, Afif

IPC: H04N1/10

CPC classification number: H04N1/1017 ,  B42D9/04 ,  H04N1/00127 ,  H04N1/193 ,  H04N2201/0081 ,  H04N2201/0434 ,  H04N2201/0464

Abstract: To provide a portable, compact, and cheap motorized Book Scanner (20), with automatic pages turn over feature to scan books of moderate size and thickness. The scanner is compromised mainly from a housing (22) and inner enclosed parts: a scan head (29), electric motor (30), set of gears to transfer the motor shaft (31) rotation to drive two side wheels (27) to create a movement of the scanner (20) over the book pages, and to drive the rotation of the dual-rotating cams (23) that are used to start flipping a book page, while the tapered front lower part (40) of the scanner housing (22), assists in completing the turnover of each page. The device starts by turning a page over in front of its front side, while the scan head (29) start scanning the flat pages, then the motor (30) reverses its rotation, as a result, the scanner (20) moves back, but without scanning or turning over of pages.

Abstract translation: 为了提供便携式，紧凑型和便宜的电动书本扫描仪（20），具有自动翻页功能以扫描中等尺寸和厚度的书籍。 扫描仪主要受到外壳（22）和内封闭部分的影响：扫描头（29），电动机（30），传动电机轴（31）旋转的一组齿轮以驱动两个侧轮（27）至 在书页上产生扫描器（20）的移动，并且驱动用于开始翻转书页的双旋转凸轮（23）的旋转，同时扫描器的锥形前下部（40） 住房（22），协助完成每一页的营业额。 该装置通过在其前侧翻转页面，而扫描头（29）开始扫描平面页面，然后马达（30）反转其旋转，结果扫描器（20）向后移动， 但不扫描或翻页。

公开(公告)号：WO2012110900A3

公开(公告)日：2012-08-23

申请号：PCT/IB2012/001309

申请日：2012-06-29

Applicant: ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida

Inventor： ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida

IPC: H04M1/02 ,  G06F1/16

Abstract: To provide a drive mechanism based on two tiny electric motors (27, 29), to drive the rotation of two outer display panels (21, 24) hinged to two inner hinged display panels (22, 23), each from one side. A groove is made in-between each hinged outer (21, 24) and inner panel (22, 23) for installing each motor (27, 29), while the inner panels are hinged together from their other sides. Two legs (37, 39) are installed on the shaft end of the motor (27, 29), each drive shaft will rotate one leg (37), which will rotate one outer panel (21, 24) 90°, while the inner panels (22, 23) will be dragged by the outer panels (21, 24) to fold or unfold with them 90° for each. In each mechanism, an assisting wire (44) is installed around the drive shaft to protrude down and out to assist in lifting up the fully unfolded panels (tablet configuration), while a spiral spring (41) is installed to provide a braking power against the skidding of the panels while unfolding.

公开(公告)号：WO2012104734A3

公开(公告)日：2012-08-09

申请号：PCT/IB2012/001035

申请日：2012-05-24

Applicant: ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida

Inventor： ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida

IPC: B60J11/04

Abstract: To provide a storing, pulling, pushing, and guiding assisting kit (20) for accordion pleated car covers (22), as the cheapest, lightest, most practical, fastest, safest, and the smallest in size, over all of the other used mechanisms. The kit (20) compromises three tools of interrelated technical features: a U- shaped plastic storing box (21) opened from three sides, enveloped by fabric (31), and enclosing the fabric pleats (23), the pulling tool is a pulling arm (28) inserted longitudinally inside a pleats collecting tool (27), wherein the pleats collecting tool is enveloped by part of the top fabric (24) front end. The pulling arm (28) is used to pull the collecting tool (27) forward or backward, hence, the pleats (23) are extended to cover the vehicle, or pushed and collected back in-between the jaws (36) of the collecting tool (27), the box (21) is used to store the pleats collecting tool (27), the guide arm (28), and the fabric pleats (23) which are to be arranged in layers.

公开(公告)号：WO2011104578A3

公开(公告)日：2011-11-03

申请号：PCT/IB2010003242

申请日：2010-12-13

Applicant: ALSHDAIFAT WASFI ,  ALMUHAIRBI EIDA

Inventor： ALSHDAIFAT WASFI ,  ALMUHAIRBI EIDA

IPC: B60C17/06

CPC classification number: B60C17/06 ,  B60C17/061

Abstract: To provide an installable support ring inside nearly the whole cavity of the tire (20) without various complications in parts and procedures, a double-support ring (24) is designed by dividing it into two different annular pieces, one is installed inside the tire's cavity, the other is installed around the wheel rim. The tire's internal support ring (25), will set and fit around the rim's support ring (28). The rim's semi-flexible annular support (28) is having a geometrical holes (32) for solving and supporting physical requirements, the tire's inner support ring (25) is made of two annular flexible elastic sheets (26), with a curvature parallel to the tire's crown, and reaching the middle height of the tire, these sheets include an array of reinforced polyurethane pads (27). The design further supports the whole flat tire's side walls from a noticeable collapse to let it be driveable safely for longer distances and higher speeds than conventional types.

Abstract translation: 为了在轮胎（20）的几乎整个空腔内提供可安装的支撑环而在部件和程序中没有各种复杂情况，通过将双支承环（24）分成两个不同的环形件设计，一个安装在轮胎 另一个安装在轮辋周围。 轮胎的内部支撑环（25）将围绕轮辋支撑环（28）设置和装配。 轮辋的半柔性环形支撑件28具有用于解决和支撑物理要求的几何孔32，轮胎的内支撑环25由两个环形柔性弹性片26构成， 轮胎的胎冠，并达到轮胎的中间高度，这些床单包括一系列增强聚氨酯垫（27）。 该设计进一步支撑了整个爆胎的侧壁，使其能够在比传统类型更长的距离和更高的速度下安全地行驶。

公开(公告)号：WO2011104576A1

公开(公告)日：2011-09-01

申请号：PCT/IB2010/002840

申请日：2010-11-05

Applicant: ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida

Inventor： ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida

IPC: B65D1/04 ,  B65D81/32

CPC classification number: B65D83/68 ,  B05B11/3074 ,  B65D83/48 ,  B65D83/54

Abstract: Filling fluids of similar types or place of use in separate bottles or cans, consumes more materials, more pockets and requires separate announcements, filling such fluids in a multi-chamber bottle (20) or can, but with a modified design of the caps (22), multiple-actuators (21), spring (36).. is a necessity and can be more attractive, here a multi-chamber bottle (20) with a compact one multi-actuator (21) is designed, where the actuators (24) are located under one cap (22) having a groove for a sliding selector switch (27), which loads separately the selected actuator (24), while any of the actuators (24) is retarded through the same single spring (36) located out of the valves housings, not like the conventional ones with multi-springs for multi-actuators. The actuators (24) are arranged side by side to spray from under one main slideable up-down cap (22) either with their orifices (29) arranged horizontally, vertically or in a rectangular shape.

Abstract translation: 在单独的瓶子或罐中填充相似类型或使用场所的液体，消耗更多的材料，更多的口袋，并且需要单独的通告，在多室的瓶子（20）中填充这种流体，或者可以改变设计的盖子 22），多个致动器（21），弹簧（36）..是必需的，并且可以更具吸引力，这里设计具有紧凑的一个多致动器（21）的多室瓶（20），其中致动器 （24）位于具有用于滑动选择器开关（27）的槽的一个盖（22）下方，其分别加载所选择的致动器（24），同时任何致动器（24）通过相同的单个弹簧（36）延迟 ）位于阀外壳之外，不像传统的带有多个执行器的弹簧。 致动器（24）并排布置，以从其一个主可滑动上下盖（22）下方喷射，或者其水平，垂直或矩形排列的孔（29）。

公开(公告)号：WO2010073071A1

公开(公告)日：2010-07-01

申请号：PCT/IB2009/005558

申请日：2009-05-07

Applicant: ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida

Inventor： ALSHDAIFAT, Wasfi ,  ALMUHAIRBI, Eida

IPC: B60J11/02

CPC classification number: B60J11/04

Abstract: The cover is designed basically by dividing the fabric (20) to pleats (34), with 15 cm width parallel to the vehicle width, the pleats (34) are arranged in continuous pairs over each other inside U-shaped bag (21) stored inside luggage compartment. The bag (21) has in its lower side a built-in spring retarder roller, used to pull back the fabric pleats (34) using a net of guide cords (35) distributed throughout the pleats (34). After the bag (21) is pulled out from the trunk and is fixed around the rear bumper (25), the accordion fabric (20) is pulled using a pulling stick tell covering the whole vehicle, then it's secured under the front bumper and around the vehicle's bottom side. When the fabric (20) is released, the retarder roller pulls the hinged pleats (34) back, through cords, tell it is gathered inside the bag, which will be returned to trunk.

Abstract translation: 基本上通过将织物（20）划分成与车宽度平行的15cm宽度的褶皱（34）来设计所述覆盖物，所述褶皱（34）在存储的U形袋（21）内彼此连续地布置 行李箱内。 袋（21）在其下侧具有内置的弹性缓冲辊，用于使用分布在整个褶皱（34）中的导丝网（35）的网来拉回织物褶皱（34）。 在袋子（21）从主干中拉出并固定在后保险杠（25）周围之前，使用拉杆来拉动手风琴织物（20），覆盖整个车辆，然后将其固定在前保险杠周围 车底部。 当织物（20）被释放时，延迟器辊将铰链的褶皱（34）拉回到通过绳索，将其聚集在袋内，这将被返回到树干。

公开(公告)号：WO2017221078A2

公开(公告)日：2017-12-28

申请号：PCT/IB2017/001407

申请日：2017-11-13

Applicant: ALSHDAIFAT, Wasfi

Inventor： ALSHDAIFAT, Wasfi

CPC classification number: G05D1/0094 ,  A63B71/0605 ,  A63B71/0619 ,  A63B2071/0658 ,  A63B2220/13 ,  A63B2220/16 ,  A63B2220/18 ,  A63B2220/51 ,  G05D2201/0214

Abstract: To provide a robotic land or aerial moveable arrangement (20) carrying a monitor (21) for replaying videos of specific parts of the match to be reviewed (seen) by the yard main referee. A moveable land robot (22) or aerial robot (24) or UAV (29) approaches the referee by moving toward him on motorized wheels 23 or by flying, to show a video replay for the required part to assist him in giving the right decision. These video replays are collected from yard side stand cameras, UAV cameras and sensed impacts on a player leg or foot which are sensed via a net of piezoelectric material.

Abstract translation: 提供一种带有监视器（21）的机器人地面或空中可移动装置（20），用于重放由院子主要裁判审查（见）的比赛特定部分的视频。 可移动陆地机器人（22）或空中机器人（24）或无人机（29）通过在机动车轮23上朝着他移动或通过飞行来接近裁判，以显示所需部分的视频重放以协助他做出正确决定 。 这些视频回放是从庭院侧支架相机，无人机摄像机以及通过压电材料网络感应到的玩家腿部或脚部感应到的影响。