Abstract:
본 발명은 휴대 단말기의 셀 재선택 방법 및 장치에 관한 것이다. 본 발명의 셀 재선택 방법은 셀 재선택 시, 셀 재선택 대상이 되는 기지국들의 신호 세기를 측정하는 측정 단계, 상기 측정 결과, 기준 마크로 셀 기지국의 신호 세기가 펨토 셀 기지국의 신호 세기보다 큰 경우, 상기 펨토 셀 기지국의 신호 세기를 스케일링 하는 스케일링 단계 및 상기 스케일링된 펨토 셀 기지국의 신호 세기 및 상기 기준 마크로 셀 기지국의 신호 세기에 따라 셀 재선택에 대한 우선순위를 결정하고, 우선순위가 가장 높은 기지국을 상기 셀 재선택 대상의 기지국으로 선택하는 재선택 단계를 포함하는 것을 특징으로 한다. 셀 재선택, 신호 세기, 펨토 셀, 스케일링
Abstract:
본 발명은 핸드오버 지연을 줄이기 위한 주변 이동 기지국 파악 방법 및 장치에 관한 것이다. 본 발명의 일 측면은, 서로 다른 방향을 가지는 복수의 기지국 상대 이동 벡터를 가정하고, 상기 가정한 각 기지국 상대 이동 벡터의 수신 부호 강도 변화를 예측하고, 상기 수신 부호 강도 변화를 실제로 측정하고, 상기 수신 부호 강도 변화에 대한 예측 결과와 실제 측정 결과를 비교하고, 상기 비교 결과를 바탕으로 기지국 상대 이동 벡터를 파악하며, 상기 파악된 기지국 상대 이동 벡터를 이용하여 핸드오버 지연을 줄이기 위한 주변 기지국의 스캐닝 우선 순위를 결정하는 주변 이동 기지국 파악 방법을 제공한다. 본 발명에 의하면, 핸드오버 발생 가능성이 낮은 주변 기지국에 스캐닝 우선 순위를 적용하여 스캐닝 소요 시간을 줄임으로써 핸드오버 지연을 줄일 수 있게 되는 효과가 있다. 이동 기지국, 상대 이동, 핸드오버 지연, 스캐닝, 군사
Abstract:
본 발명은 다중 홉 중계 방식의 광대역 무선통신 시스템에서 중계기 핸드오버를 수행하는 단말로의 송신 패킷 관리에 관한 것으로, 기지국은, 수신되는 액티브캐스트(Activecast) 요청 메시지에 따라 해당 단말에 대한 액티브캐스팅(Activecasting) 수행 여부를 판단하는 제어부와, 상기 액티브캐스팅 수행이 결정된 경우, 상기 단말의 서빙 중계기와의 채널 상태를 고려하여 자원을 할당하는 스케줄러와, 상기 할당된 자원을 이용하여 타겟 중계기 및 상기 서빙 중계기에게 상기 단말로의 송신 패킷을 멀티캐스팅(Multicasting)하는 송신부를 포함하여, 중계기를 통해 통신을 수행하는 단말의 중계기 핸드오버(Handover)로 인한 패킷 전송 지연을 감소시켜 끊김없는 서비스를 제공할 수 있다. 다중 홉 중계, 핸드오버, 버퍼 관리, 액티브캐스팅(Activecasting)
Abstract:
An apparatus and a method for processing a call about a terminal outside of a cell coverage by requesting a call based on peer-to-peer communications are provided to supply a call service to the terminal outside the call coverage by replaying a neighboring terminal to the base station. A broadcast message is not received from a base station for a certain time and recognizes the terminal of the cell coverage outside the terminal(503). When the house request event is generated, help signal is transmitted from the terminal to neighboring terminals in order to request the relay about the call(513). When the response message about help signal is received, the terminal sets up the neighboring terminal transmitting the response message direct(517).
Abstract:
본 발명은 무선 시스템에서 멀티캐스트 서비스의 링크 성능 향상을 위한 장치 및 방법에 관한 것으로서, 하나의 프레임에서 데이터가 수신될 시, 상기 데이터의 정보어 패킷들을 이용하여 상기 데이터를 복원하는 과정과, 상기 정보어 패킷들을 이용한 데이터의 복원이 실패할 시, 다음 프레임에서 상기 데이터의 패리티 패킷들을 수신하고, 상기 수신된 패리티 패킷들을 이용하여 상기 데이터를 복원하는 과정과, 상기 패리티 패킷들을 이용한 상기 데이터의 복원이 실패할 시, 자의적 핸드오버(Autonomous Handover)를 수행하여 인접 셀 혹은 섹터로부터 상기 데이터의 패리티 패킷을 수신하고, 상기 수신된 패리티 패킷들을 이용하여 상기 데이터를 복원하는 과정을 포함하여, 동일한 양의 무선 자원을 사용하면서도 셀 경계 사용자들의 재전송 패킷의 수신 기회를 늘려 셀 경계 사용자들의 멀티캐스트 서비스의 링크레벨 성능을 향상시키고, 멀티캐스트 패킷 송신을 위한 MCS 레벨 또는 외부 부호율(outer coding rate)을 증가시키며, 나아가 전체 셀 성능(throughput)을 증가시키는 이점이 있다. 멀티캐스트, MBMS, autonomous handover, 핸드오버
Abstract:
A method and an apparatus for transmitting and receiving data in a communication system are provided to save required resources in transmitting data as a BS(Base Station) and an RS(Relay Station) transmit identical data in multicast. If the first data to be transmitted are generated, a BS detects and groups the first and second MSs(Mobile Stations) which will receive the first data. In order to transmit data to the MSs in multicast together with an RS, the BS transmits the first data to an RS through the first interval which uses the first resource of a downlink sub-frame(400). The first MS receives the first data transmitted to the RS from the BS(402). If the RS receives the first data transmitted from the BS, the RS transmits the first data to the second MS which belongs to the RS(404). In this case, the first data are transmitted through the second interval which uses the second resource of the downlink sub-frame.
Abstract:
An apparatus and a method for transmitting/receiving CQI(Channel Quality Indication) in a communication system are provided to transmit/receive a CQI by using an average CQI method by MS(Mobile Station) group having a spatial association. A BS(Base Station)(200) searches MSs which are located within a certain range and have similar slow fading characteristics and groups them(208), and transmits a group_CQI_pair message to the first MS(202) among the MSs belonging to the group. Upon receiving the group_CQI_pair message, the first MS generates an ACK message indicating that the group_CQI_pair message has been received without an error, and transmits it to the BS(210). The BS transmits the group_CQI_pair message to the second MS(204)(212). The second MS transmits the ACK message and transmits it to the BS(214). The BS transmits the group_CQI_pair message to the nth MS(206)(216). The nth MS transmits the ACK message to the BS(218). When the first MS is designated as a representative terminal, it generates an average CQI and generates and transmits a CQI_feedback message to the BS(220). When the second MS is designated as a representative terminal, it generates a CQI_feedback message including an average CQI and transmits it to the BS(222). When the nth MS is designated as a representative terminal, it generates a CQI_feedback message including an average CQI and transmits it to the BS(224). When the first MS is designated as a representative terminal, it generates a CQI_feedback message including an average CQI and transmits it to the BS(226).
Abstract:
본 발명에 따른 자원을 부채널 옵셋과 심볼 옵셋으로 정의되는 데이터 영역으로 할당하는 직교주파수분할다중접속 통신 시스템에서의 이차원 자원 할당 방법은 적어도 두 개의 데이터 영역을 순차적으로 정의하고, 먼저 정의된 제1 데이터 영역을 할당하고, 나중에 정의된 제2 데이터 영역이 상기 제1 데이터 영역과 중첩되는지를 판단하고, 상기 제2 데이터 영역이 제1 데이터 영역과 중첩되면, 중첩된 부분을 뺀 나머지 부분을 제2 데이터 영역으로 할당한다. 본 발명의 자원 할당 방법에서는 요구되는 자원을 직사각형의 형태로 중첩 할당 하되 순차적 할당을 통해 먼저 할당된 자원과 중첩된 부분을 뺀 나머지 자원을 할당 함으로써 자원 낭비를 최소화 할 수 있다.
직교주파수분할다중접속(OFDMA), 자원 할당(resource allocation), 하향링크 맵 (DL MAP)
Abstract:
본 발명은 이동통신 시스템에서 트래픽 비대칭성을 지원하기 위한 하이브리드 시간 분할 듀플렉스 장치 및 방법에 관한 것으로서, 다중 셀간 협상을 통해 프레임의 제 1 구간과 제 2 구간 및 제 3 구간의 길이를 결정하는 과정과, 트래픽 비대칭성을 고려하여 상기 제 2 구간을 제 4 구간과 제 5 구간으로 나누어 각 구간의 길이를 결정하는 과정과, 상기 제 1 구간과 제 3 구간에 셀 외부 사용자를 스케쥴링하고, 상기 제 2 구간에 셀 내부 사용자들을 스케쥴링하는 과정을 포함하여, 단말-단말 간섭과 기지국-기지국 간섭을 효율적으로 제어하고, SINR 값의 향상 및 성능 저하를 막을 수 있는 이점이 있다. TDD, 하이브리드 시간 분할 듀플렉스, 스케쥴링, 간섭