Abstract:
1. 청구 범위에 기재된 발명이 속한 기술분야 본 발명은 인터넷 프로토콜의 다양한 서비스 프로토콜과 네트워크 인터페이스 첨가 및 삭제 방법에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 인터넷 프로토콜 프로그램의 직접적인 수정없이 네트워크 인터페이스와 서비스 프로토콜의 첨가 및 삭제가 용이한 인터넷 프로토콜의 다양한 서비스 프로토콜과 네트워크 인터페이스 첨가 및 삭제 방법을 제공하고자 함. 3. 발명의 해결방법의 요지 본 발명은, 인터넷 프로토콜 관리자는 사용자로부터 명령을 수신하여 명령어 형태가 네트워크 인터페이스 또는 서비스 프로토콜인지를 판단하는 제 1 단계; 명령어 형태가 네트워크 인터페이스이면 네트워크 인터페이스 관리 모듈을 호출하여 네트워크 인터페이스를 첨가 또는 삭제하는 제 2 단계; 및 명령어 형태가 서비스 프로토콜이면 서비스 프로토콜 관리 모듈을 호출하여 서비스 프로토콜을 첨가 또는 삭제하는 제 3 단계를 포함한다. 4. 발명의 중요한 용도 본 발명은 인터넷 프로토콜 기능의 통신장치에 이용됨.
Abstract:
1. 청구범위에 기재된 발명이 속한 기술분야 본 발명은 광대역 종합 정보 통신망을 이용한 비연결형 데이터 서비스망에서의 주소 해결 방법에 관한 것이다. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은, 인터넷 프로토콜을 지원하는 광대역 종합 정보 통신망을 이용한 비연결형 데이터 서비스망에서 비연결형 데이터 단말간의 인터넷 프로토콜의 원할한 전송을 하도록 한 주소 해결 방법을 제공하고자 함. 3. 발명의 해결방법의 요지 본 발명은, 단말은 서버와 비동기 전송 모드 교환기를 통하여 가상 회선을 설정하여 단말이 서버로 등록을 요청하고, 단말에서 발생된 이벤트에 따라 주소 해결 절차를 수행하며, 서버로부터 데이터를 수신할 경우 패킷 종류를 구분하여 주소 해결 절차를 수행하고, 서버는 접속할 단말과 비동기 전송 모드 교환기를 통하여 가상 회선 설정하며 단말로부터 데이터를 수신하여 패킷 종류를 구분하여 주소 해결 절차를 수행한다. 4. 발명의 중요한 용도 본 발명은 비연결형 데이터 서비스망에 이용됨.
Abstract:
1. 청구범위에 기재된 발명이 속한 기술분야 ATM 적응계층 3/4프로토콜 다중화 기법 실현을 위한 메시지 식별자 할당방법. 2. 발명이 해결하려고 하는 기술적 과제 AAL 3/4 프로토콜에서 처리하는 메시지 식별자의 할당 및 제거 과정을 빠르고 동적으로 수행하여 장치 셩능에 영향을 주지 않도록 하고자 함. 3. 발명의 해결방법의 요지 메시지 식별자 할당 메모리를 형성하고, 기본단위라고 하는 기초 구분 값을 정의하여 메모리를 기본단위로 나누어 기본단위영역들로 구성한다. ATM 연결이 설정될 때메시지 식별자들의 할당은 기본단위영역을 기초로 하는 가상 할당영역을 구성하여가상할당영역의 첫 기본단위영역을 조사하므로써 할당과정이 가능하도록 하여 처리과정이 빠르게 이루어 지도록한다. 할당된 메시지 식별자들의 시작위치와 할당크기만을 ATM 연결 정보에 기록하여 할당된 식별자들을 제거시에 단순하게 처리할 수있도록 한다. 4. 발명의 중요한 용도 AAL 3/4 프로토콜을 사용하는 임의의 ATM 장치에 적용됨
Abstract:
본 발명은 고속전송을 위한 제어 과정을 효율적으로 수행하여, 버스방식의 B-TA 장치에서 프로세서로 부터 통신보드로의 데이터 전달시에 발생되는 프로세서로 인한 성능의 하락을 방지하므로서 고속 전송 능력을 향상시켜 성능을 최대로 이용할 수 있는 비-티에이(B-TA) 장치 및 방법을 제공하는데 그 목적이 있으며, 공통버스(31 내지 34)를 통하여 고속의 통신을 원하는 처리능력이 낮은 프로세서들(31)과 CPU 없는 고속 통신 보드가 상호 연결되고 제어 프로세서의 제어를 받아 고속 통신망을 통하여 데이터를 고속으로 효율적으로 전송할 수 있도록 구성하여, 상기 목적을 달성하였다.
Abstract:
PURPOSE: A method for processing PPPoE(Point-to-Point Protocol over Ethernet) service in an ATM-based MPLS(MultiProtocol Label Switching) network is provided to supply PPPoE service to a subscriber who wants to be provided Internet service through an ATM-based ADSL. CONSTITUTION: An FCC(Forwarding Control Channel) to transfer a control packet is set up between an IPCP(Internet Protocol Control Processor) and an FE(Forwarding Engine,501). If a PPPoE subscriber packet contained in an AAL5 frame is received to an MPLS system, the FE stores an interface channel with an ATM switch having received the subscriber packet in an FE_CH variable(502). The FE checks whether the value of an LLC(Logical Link Control) field among the LLC header of the received packet is 0xAAAA03(503). If the LLC field value is 0xAAAA03, the FE checks whether the value of an OUI(Organizationally Unique Identifier) field is 0x0080C2(504). In case that the OUI field value is 0x0080C2, the FE checks whether the value of a PID(Packet IDentifier) field is 0x0001 or 0x0007(505). If the PID field value is 0x0001 or 0x0007, the FE checks an Ethernet type field in a PPPoE frame(506). If the value of the Ethernet type field is 0x8863, the FE adds an FCC header in order to transmit the received packet to the IPCP(507). The PPPoE packet containing the FCC header is transmitted to a PPP server in the IPCP(508). The PPP server executes a PPPoE discovery control procedure(509).
Abstract:
PURPOSE: A method for exchanging service network information for the inter-working of different kinds of networks is provided to flexibly cope with extension and reduction while maintaining network type information and communication channel information using an identical method, regardless of application patterns. CONSTITUTION: A service network access subsystem requests service network information message transmission in order to report its own service network information(S401). The subsystem sets up a transmitting unit confirmation timer and a message transmitting timer(S402) and waits until an event is generated(S403). If a message transmitting timer end event is generated, the subsystem requests service network information message transmission(S404). The subsystem resets up the message transmitting timer(S405) and waits until an event is generated(S403). If a message transmitting unit confirmation timer end event is generated, the subsystem confirms access provider information recorded in management data(S406). If information for an access provider is confirmed, the subsystem calculates the difference between a time a message about the access provider was received and the current time(S407). If this time difference is smaller than a timer value, the subsystem deletes the record of the access provider(S409). The subsystem confirms information for the next access provider(S410).
Abstract:
PURPOSE: A method for identifying addresses between nodes is provided to simultaneously discover node addresses and ethernet addresses, which are included in a specific group and connected to a specific network on an ethernet network. CONSTITUTION: A method for identifying node addresses on an ethernet network utilized as a mainstay network for interlocking comprises the steps of: performing a request module for an NARP(Node Address Resolution Protocol); deciding a kind of an event when the event occurs, in an event stand-by state; performing a process module for the NARP, when a packet reception event of the NARP occurs in the second step; performing a report module for the NARP, when a completion event of a period timer occurs in the second step; and performing a table management module for the NARP, when a completion event of an aging timer occurs in the second step.