Abstract:
Disclosed is a method and system thereof for transmitting a Voice over Internet Protocol (VoIP) packet over a primary channel and a supplemental channel belonging to a shared pool of supplemental channels in a wireless communications network such that Orthogonal Variable Spreading Factor (OVSF) codes associated with higher spreading factors (SF) may be used, thereby minimizing the adverse effects on system resources associated with implementing VoIP over downlink Dedicated Channels (DCH). In the method and system, if an entire VoIP packet cannot be transmitted over a single transmission time interval on a primary channel, a specific supplemental channel (or code associated therewith) is assigned to a User Equipment (UE) to which the VoIP packet is intended. A portion of the VoIP packet is transmitted to the UE over a Dedicated Physical Data CHannel (DPDCH) on the primary channel, and another portion of the VoIP packet is transmitted to the UE over a DPDCH on the supplemental channel. The assigned specific OVSF code (or supplemental channel associated therewith) belongs to a set of supplemental OVSF codes assigned to the UE, and the set of assigned supplemental OVSF codes belongs to a shared pool of supplemental OVSF codes reserved at Node B. The identity of the assigned specific supplemental OVSF code used for the supplemental channel is indicated to the UE over a Dedicated Physical Control CHannel (DPCCH) on the primary channel. The UE examines the DPCCH on the primary channel to determine whether a specific supplemental channel (or code associated therewith) has been assigned to it. If a specific supplemental channel was assigned, then the UE will decode the data on the assigned specific supplemental channel along with the data on its primary channel. Otherwise, the UE will only decode the data on its primary channel.
Abstract:
An exemplary method of controlling communications that may include enhanced dedicated channel (E-DCH) traffic includes setting a total uplink power limit below an allowable power limit. A minimum amount of uplink resources is allocated to each user requesting E-DCH service on an individual user basis such that a cumulative E-DCH power allocation satisfies a selected minimum E-DCH power allocation threshold. A determination whether to grant a non-E-DCH service request is made based upon a relationship between the current total uplink power and the total uplink power limit and a relationship between the selected minimum E-DCH power allocation threshold and a current cumulative E-DCH power.
Abstract:
A technique is disclosed for determining values of different portions of a total uplink interference, which can be used for scheduling and load control at a base station, for example. A disclosed example includes obtaining measurements from individual users and using those measurements to determine corresponding portions of a total uplink interference at the base station. One portion is associated with users that is controlled by a scheduler for that base station. Another portion is associated with users that are not controlled by that scheduler. Determining each of the portions individually and using a received total wideband power measurement allows for determining each of the major portions of the total uplink interference at a base station.