Abstract:
A method for removing an ICI(Inter Carrier Interference) in an OFDM(Orthogonal Frequency Division Multiplexing) system using a repetition coding or deep fade detection is provided to improve a performance of a communication system and a broadcasting system by selectively adapting a repetition coding or deep fade detection algorithm to a conventional time domain ICI removing algorithm. A method for removing an ICI in an OFDM(Orthogonal Frequency Division Multiplexing) system using a repetition coding or deep fade detection includes the steps of: copying NS data symbols into M groups of data symbols and generating group symbols for a base band symbol to be assigned and transmitted to a different sub carrier(S210); generating a mapping group symbol by mapping each symbol of the group symbols to the sub carrier(S220); performing an inverse discrete Fourier transform, insertion of a CP(Cyclic Prefix) for the mapping group symbol, and transmitting the mapping group symbol to a receiver(S230); removing the CP of the mapping group symbol and performing a discrete Fourier transform(S240); extracting the group symbols, which are demapped from the sub carrier, from the mapping group symbol(S250); adapting an MRC(Maximum Ratio Combining) to the group symbol(S260); and generating a base band symbol by adapting a time domain ICI removing algorithm to the group symbol using the MRC(S270).
Abstract:
본 발명은 전송방식으로 직교 주파수 분할 다중을 사용하는 IEEE 802.11a 무선랜 시스템에 다중입력 다중출력-직교 주파수 분할 다중 기법을 적용하는 경우 동기부를 위한 새로운 프리앰블 구조에 관한 것이다. 본 발명의 다중입력 다중출력-직교 주파수 분할 다중 방식을 사용하는 무선랜 시스템의 동기부를 위한 프리앰블 구조는 짧은 훈련심볼을 첫 번째 송신 안테나에만 전송하는 단계; 긴 훈련심볼을 널링 방식으로 송신 안테나에 전송하는 단계; 및 직교 패턴을 전송하는 단계로 이루어짐에 기술적 특징이 있다. 따라서, 본 발명의 다중입력 다중출력-직교 주파수 분할 다중 방식을 사용하는 무선랜 시스템의 동기부를 위한 프리앰블 구조는 다양한 다중입력 다중출력-직교 주파수 분할 다중 기법 및 다이버시티 기법에 적용이 가능하며, 신호검출, 심볼옵셋추정 및 보정, 주파수 옵셋 추정 및 보정, 채널추정 등의 동기부 설계에 효과적이므로 시스템 성능을 크게 향상시키는 효과가 있다. 직교 주파수 분할 다중, 다중입력 다중출력, 무선랜, 프리앰블
Abstract:
본 발명은 OFDM 통신 시스템의 채널 추정에 관한 것으로서, 수신된 OFDM 신호에 대하여 FFT 연산을 수행하는 단계와, 상기 FFT 연산 단계의 결과값에 대하여 파일롯 심볼을 이용하여 LS 기법으로 예비적으로 채널을 추정하는 단계와, 상기 예비적 채널 추정 결과에 대하여 IFFT 연산을 수행하여 CIR(Channel Impulse Response)의 추정값을 구하는 단계와, 상기 추정값에 소정의 진폭조정계수를 승산하는 단계와, 상기 승산 단계의 결과와 소정의 문턱값을 비교하는 단계와, 상기 승산 단계와 비교 단계를 통하여 상기 CIR 추정값의 정확성을 향상시키는 단계와, 상기 향상된 CIR 추정값을 FFT 연산에 의하여 채널 추정값으로 변환하는 단계를 포함하는 OFDM 통신 시스템의 채널 추정 방법 및 이를 구현한 채널 추정기를 제공한다. OFDM, 채널 추정, 파일롯 심볼, STO, CIR
Abstract:
본 발명은 고속이동채널에서 공간시간 블록부호-직교주파수 분할다중 시스템의 수신간섭신호 제거 방법에 관한 것으로, 고속이동환경에서 공간시간 블록부호-직교주파수 분할다중 전송 방식을 사용할 경우 채널의 시변 특성에 의해 수신기에 동시에 발생하는 채널간간섭과 자기채널간섭 중 자기채널간섭을 보상하는 수신단 기술과 송신단 기술을 제안하는 방법에 관한 것이다. 본 발명의 고속이동채널에서 공간시간 블록부호-직교주파수 분할다중 시스템의 수신간섭신호 제거 방법은 공간시간 블록부호-직교주파수 분할다중 시스템을 시변채널에서 사용할 경우 수신단에서 결합된 채널의 이득을 추정하는 제 1단계; 상기 추정된 이득을 비교해 첫 번째 임시 결정심볼을 구하는 제 2단계; 상기 첫 번째 임시 결정심볼을 이용하여 두 번째 임시 결정심볼을 구하는 제 3단계; 상기 두 번째 임시 결정심볼을 이용하여 자기채널간섭항을 제거하고 세 번째 임시 결정심볼을 얻는 제 4단계 및 상기 세 번째 임시 결정심볼을 이용하여 최종 데이터 심볼을 얻는 제 5단계를 포함하여 이루어짐에 기술적 특징이 있다. 따라서, 본 발명의 고속이동채널에서 공간시간 블록부호-직교주파수 분할다중 시스템의 수신간섭신호 제거 방법은 공간시간 블록부호-직교주파수 분할다중 시스템에서 간단한 수신기 구조를 사용하여 자기채널간섭을 보상할 수 있으며, 그로 인해 공간시간 블록부호-직교주파수 분할다중 시스템을 고속 이동 환경에서 사용할 수 있게 하는 효과가 있다.
Abstract:
PURPOSE: A preamble structure for a synchronization device of a wireless LAN system using a multiple-input multiple-output OFDM method is provided to improve performance by providing an excellent effect to a signal detection process, a symbol offset estimation and correction process, a frequency offset estimation/correction process, and a channel estimation process. CONSTITUTION: A preamble structure includes a short training symbol transmission process, a long training symbol transmission process, and an orthogonal pattern transmission process. The short training symbol transmission process is performed to transmit simultaneously short training symbols to all of transmission antennas. The long training symbol transmission process is performed to transmit simultaneously long training symbols to all of the transmission antennas. An orthogonal pattern transmission process is performed to transmit orthogonal patterns.
Abstract:
PURPOSE: A baseband core for an SDR(Software Defined Ratio) communication system and a controlling method thereof are provided to perform operations of baseband parts of various communication systems by using a baseband core for the SDR. CONSTITUTION: A baseband core for an SDR communication system includes a MCU(Modem Control Unit), an SBU(SDR Baseband Unit), and an FMMU(Frame and Memory Management Unit). The MCU(100) controls a process for selecting plural functional modules according to module flag signals, provides parameters of the selected functional modules, and provides the chain information and the processing speed matching information of the functional modules. The SBU(110,120) includes the functional modules and operates the corresponding functional modules according to the module flag signals and the parameters. The FMMU(130) inputs data into or outputs the data from the functional modules of the SBU by using the processing speed and the chain information.
Abstract:
PURPOSE: An MAC(Media Access Control) processing device is provided to process data of downstream channels as simultaneously extracting overhead information, and to process an AAL5 in software, then to process ATM cells only in hardware, thereby updating exact slot counters and simplifying hardware. CONSTITUTION: An ESF(Extended Super Frame) buffer(102) generates an OH bit from an input bit stream. A bit2byte block(106) removes the OH bit from the supplied bit stream, and processes the bit stream in byte units. An HEC REC block(122) recovers or senses an error of an ATM cell. An ATM filter(124) separates unnecessary ATM cells. A synchronization block(104) adjusts frame synchronization. A scheduler(136) schedules data transmissions of upstream channels by using slot counter information and upstream channel control information. A CRC6 block(112) senses whether an error is generated from a frame. A receive connection buffer(132) extracts the upstream channel control information. A connection table(138) stores necessary information. A read controller(142) reads data to be transmitted to an upstream channel. A head adder(144) and an HEC block(146) configure ATM headers, and generate ATM cells. A ranging block(154) informs of starting time for transmitting data to the upstream channel. A de-interleaver block(108) restores interleaved data to original data.
Abstract:
PURPOSE: A device of processing an OOB(Out-Of-Band) physical layer of a POD(Point Of Deployment) module for an open cable is provided to process digital broadcasting data transmitted from a head end and data transmitted to the head end from a digital terminal with a combined method of DVS-178 and DVS-167 standards, thereby simplifying with one POD module. CONSTITUTION: An FDC(Forward Data Channel) block(210) comprises as follows. The first demultiplexer(211) selectively outputs digital broadcasting data of DVS-178 and DVS-167 standards. The DVS-178 standard digital broadcasting data is output to the first multiplexer through the first convolutional deinterleaver(212), the first R-S decoder(213), and the first derandomizer(214). The DVS-167 standard digital broadcasting data is output to the first multiplexer through the second derandomizer(215), the second convolutional deinterleaver(216), and the second R-S decoder. The first multiplexer transmits the DVS-178 and the DVS-167 digital broadcasting data to an upper layer by receiving a selection signal. An RDC(Reverse Data Channel) block(220) processes subscriber information or the digital data in a physical layer, and transmits the information and the data to a head end(100).
Abstract:
PURPOSE: A device of processing an OOB(Out-Of-Band) physical layer of a POD(Point Of Deployment) module for an open cable is provided to process digital broadcasting data transmitted from a head end and data transmitted to the head end from a digital terminal with a combined method of DVS-178 and DVS-167 standards, thereby simplifying with one POD module. CONSTITUTION: An FDC(Forward Data Channel) block(210) comprises as follows. The first demultiplexer(211) selectively outputs digital broadcasting data of DVS-178 and DVS-167 standards. The DVS-178 standard digital broadcasting data is output to the first multiplexer through the first convolutional deinterleaver(212), the first R-S decoder(213), and the first derandomizer(214). The DVS-167 standard digital broadcasting data is output to the first multiplexer through the second derandomizer(215), the second convolutional deinterleaver(216), and the second R-S decoder. The first multiplexer transmits the DVS-178 and the DVS-167 digital broadcasting data to an upper layer by receiving a selection signal. An RDC(Reverse Data Channel) block(220) processes subscriber information or the digital data in a physical layer, and transmits the information and the data to a head end(100).
Abstract:
본 발명은 소규모 지역에서 데이터 통신을 이용한 하이브리드 방송 송출 시스템 및 수신 시스템에 관한 것으로, 방송 서비스 송출 시스템은 방송 데이터 수신부, DMB 전송 프레임 멀티플렉서, DMB 전송 프레임 송출부, 부가 정보 송출부를 포함한다. 상기 방송 데이터 수신부는 신규 서비스에 대한 방송 데이터 및 부가 정보를 수신한다. 상기 DMB 전송 프레임 멀티플렉서는 상기 방송 데이터를 이용하여 상기 신규 서비스의 앙상블(Ensemble)을 구성하는 DMB 전송 프레임을 생성한다. 상기 DMB 전송 프레임 송출부는 상기 생성된 DMB 전송 프레임을 송출한다. 상기 부가 정보 송출부는 상기 수신된 신규 서비스의 부가 정보를 인터넷망을 통해 송출한다.