Abstract:
본 발명은 이동통신 시스템의 각기 다른 통신망에 이용되는 적어도 2개의 시스템 프로토콜 스택(PS)들을 구비한 하이브리드 단말기에서 상기 시스템 프로토콜 스택들의 슬립/웨이크업 인터페이스를 수행하는 하이브리드 슬립 제어기가 한 개의 슬립 제어기를 이용하여 여러 시스템의 슬롯 모드를 제어하기 위한 방법 및 장치에 있어서, 시스템 프로토콜 스택(PS)으로부터의 슬립(sleep)요청에 따라, 공유 하드웨어 이용 대기 시스템이 있는지를 판단하는 과정과, 공유 하드웨어 이용 대기 시스템이 존재하지 않을 경우, 상기 슬립 제어기의 클럭 및 공유 하드웨어의 전력을 오프시켜 실제 슬립 모드로 동작하도록 제어하는 과정과, 공유 하드웨어 이용 대기 시스템이 존재하는 경우, 해당 시스템으로 액티브 명령을 전송함과 동시에 다른 시스템들이 웨이크업되는 시각까지 타이머를 구동시켜 가상 슬립 모드로 동작하도록 제어하는 과정으로 구성됨을 특징으로 한다. hybrid sleep controller, sleep mode, wake up mode, protocol stack
Abstract:
A method for receiving a broadcasting service and a unicast service and a system for the same are provided to minimize a loss of MBMS(Multimedia Broadcast Multicast Service) data and a loss of unicast data as a UE(User Equipment), which has to execute an MBMS service and a unicast service at the same time, executes the unicast service at periods not schedule for the MBMS service, based on the MBMS scheduling information received from an ENB(Evolved Node B). A UE receives an MBMS service from the cell on MBMS dedicated carrier(411). If RAU(Routing Area Update) and a unicast service start and it is time to receive a paging message, the UE switches to the cell on unicast carrier(412,413). The UE calculates candidate SFN periods, or candidate timing, to receive unicast signaling/data from the cell on unicast carrier, based on the scheduling information of the MBMS service which is being received from the cell on MBMS dedicated carrier(414). Then the UE transmits the calculated candidate SFN period information to an ENB through an RAU or LTE connection request message(415). If not, the UE switches to the cell on MBMS dedicated carrier and receives the MBMS service(416). If a candidate SFN period comes, the UE switches to the cell on unicast carrier again(417). At one among the candidate SFN periods, the UE receives a response message for the RAU or LTE connection request message(418). The UE receives the unicast service(419).
Abstract:
본 발명은 이동통신단말기에서의 핑거 할당 방법에 관한 것으로, 특히 슬림 핑거를 사용하는 이동통신단말기에서 부가채널을 할당을 위한 핑거할당 방법에 관한 것이다. 이러한 본 발명은; 슬림핑거를 사용하는 이동통신단말기에서의 핑거 할당방법에 있어서, 파일럿 채널의 에너지 정보에 근거하여 핑거할당을 수행하는 과정과, 상기 슬림 핑거에 부가채널에 대한 경로가 할당되어 있으면, 팻 핑거들 중 어느 하나의 핑거에 할당된 상기 부가채널 이외의 채널에 대한 경로와 채널 할당을 교환하는 과정으로 이루어짐을 특징으로 한다.
Abstract:
A robot phone and a receiver changing method in the robot phone are provided to enable the robot phone to find another receiver desired by an originator as moving to a place by pre-stored place priority instead of a receiver who answers the phone so as to change the receiver into the desired receiver. A moving unit(160) moves a robot phone. A voice recognizer(140) recognizes a voice command, and outputs a predetermined voice signal. An image recognizer(130) recognizes contents of an image through image information by photographing. A sensor unit(150) senses peripheral persons, and senses a command mode conversion request. A telephone function unit(120) performs a call receiving/originating function, and performs a communication function between an originator and a receiver. A memory(170) stores map information to which the robot phone belongs and places priority information on the call receiver. A controller(110) searches the second receiver who answers the phone instead of the first receiver by moving the robot phone according to the map information and the priority information, and controls so that the second receiver can answer the phone.
Abstract:
본 발명은 부호분할 다중접속 이동통신 시스템에서 다수의 셋으로 구분된 기지국들의 파일럿 채널들을 모니터링하고, 각 셋들의 탐색 속도를 효율적으로 조절하는 이동 단말의 셋 관리(Set Maintenance) 방법과 파일럿 채널 탐색기에 대한 것으로서, 본 발명의 파일럿 채널 탐색기는 먼저 액티브 셋과 후보 셋의 모든 파일럿 오프셋을 순차로 선택하여 탐색한다. 이후 네이버 셋을 다수의 서브 셋으로 구분하고 서브 셋 중 가장 우선 순위가 높은 제1 서브 셋에 속한 적어도 하나의 파일럿 오프셋을 탐색한 후, 상기 제1 서브 셋보다 우선 순위가 낮은 적어도 하나의 제2 서브 셋에 속한 적어도 하나의 파일럿 오프셋을 탐색한다. 여기서 상기 제1 서브 셋의 탐색률은 상기 제2 서브 셋의 탐색률보다 높게 설정됨을 특징으로 한다. 따라서 본 발명에 의하면, 액티브 셋과 후보 셋의 탐색율은 안정적으로 유지하면서 네이버 셋을 에너지 레벨에 따라 다수의 서브 셋으로 구분하여 각 셋의 탐색율 및 탐색 순서를 효율적으로 스케쥴링할 수 있다.
파일럿 채널, 탐색기, 셋 관리, Set Maintenance, 네이버 셋, 탐색률, 서브 셋, 파일럿 오프셋
Abstract:
본 발명은 서지 전압을 클램핑하는 플라즈마 디스플레이 패널 서스테인 구동 장치 및 방법에 관한 것으로서, 본 발명의 플라즈마 디스플레이 패널 서스테인 구동 장치는 플라즈마 디스플레이 패널을 소정 시간 동안 충전, 유지 및 방전시키는 전력 회수부와, 상기 전력 회수부와 상기 플라즈마 디스플레이 패널 사이에 흐르는 전류의 통로를 제공하는 스위칭부, 및 전원전압에 대해 역방향으로 연결되고 접지전압에 대해 순방향으로 연결된 복수개의 다이오드들을 구비하여 상기 전력 회수부에 발생하는 기생전류의 통로의 제공을 통해 상기 전력 회수부에 발생하는 서지 전압을 제거하는 클램핑부를 구비함으로써 플라즈마 디스플레이 패널 서스테인 구동 회로에 인가되는 전압 스트레스가 감소되며, 상기 전력 회수부에 구비되는 반도체 소자들을 보� � 낮은 정격 전압을 갖는 반도체 소자들로 구성할 수가 있다.
Abstract:
PURPOSE: A sub field type plasma display panel(PDP) device and a driving method thereof are provided to assure linearity of a gray level. CONSTITUTION: According to the sub field type plasma display panel(PDP), an event waveform allocation unit(503) allocates the first event waveform to generate an even-numbered light wave and the second even waveform to generate an odd-numbered light wave to a sub field. The first even waveform generation unit(501) outputs a sustain pulse to generate the even-numbered light wave, according to the allocated event waveform. The second event waveform generation unit(502) outputs a sustain pulse to generate the odd-numbered light wave, according to the allocated event waveform.