Abstract:
A system for cooperatively operating a WLAN(Wireless LAN) and a wireless Internet and a data exchanging method are provided to provide a wireless Internet service to a WLAN terminal in an area beyond the coverage of an WLAN AP(Access Point). A terminal performs signaling to a tunneling mode(S201) and generates a data packet to be transmitted to the Internet(S203). The terminal transmits the data packet to an interworking device(S205), and the interworking device capsulates the data packet(S207) and transmits the capsulated data packet(S209). The Internet receives the capsulated data and extracts the data packet from the capsulated data packet(S211). The Internet generates a data packet to be transmitted to the terminal(S213), capsulates the data packet(S215), and transmits the capsulated data packet to the interworking device(S217). The interworking device receives the capsulated data packet and extracts the data packet from the capsulated data packet(S219). The interworking device transmits the data packet to the terminal(S221).
Abstract:
본 발명은 고속 휴대 인터넷 시스템에서의 상태관리 방법에 관한 것이다. 본 발명은 AP내의 운용보전 기능과 망관리 센터와 연동되는 프로토콜 정합부를 분리하고, 자원상태관리와 연동하면서 종합적으로 셀 상태를 관리한다. 이와 같이 하면 망관리 연동 프로토콜이 바뀌는 상황에서도 AP 내의 운용보전 기능에는 전혀 영향을 주지 않으며, 고속 휴대 인터넷 시스템의 AP에서의 접속제어가 용이하도록 할 수 있다. 고속 휴대 인터넷 시스템, 액세스 포인트, 망관리 센터, 상태 관리, 자원상태 관리, 셀 상태 관리
Abstract:
본 발명은 휴대 인터넷 시스템 기지국의 형상정보 관리 장치 및 방법에 관한 것이다. 본 발명은 기지국이 휴대 인터넷 시스템의 운용 보전을 수행하는 망관리서버로부터 형상정보 관리 메시지를 수신하여, 현재 설정된 프로토콜과 동일한 프로토콜 메시지인지를 판단하고, 동일한 프로토콜 메시지가 아니어서, 해당 메시지를 현재 설정된 프로토콜 메시지로 변환한 후, 상기 변환된 형상정보 관리 메시지를 분석하여, 상기 기지국의 형상정보 추가, 요구 또는 삭제 중 어느 하나의 명령인지 판단하고, 해당 명령을 수행한 후, 형상정보를 갱신하도록 한다. 본 발명에 의하면, 기지국의 형상정보 관리를 위해 다양한 형태의 프로토콜을 항상 처리할 수 있도록 함으로써, 새로운 프로토콜에 맞게 새로 설계하거나 운용보전 블록에서 프로토콜 변환을 수행하는데 문제가 없도록 하여 형상정보 관리를 효율적으로 할 수 있도록 한다.
Abstract:
PURPOSE: A proxy server device for a mobile multimedia service is provided to enable a proxy server to function as a termination of a mobile multimedia subsystem by separating functions of a mobile communication network and a mobile multimedia network, thereby easily adding a service logic or expanding a network node in the mobile multimedia network. CONSTITUTION: An SIP(Session Initiation Protocol) processor(111) receives an SIP message from a mobile terminal. An SIP access processor(112) interfaces the SIP processor(111) with an upper application layer. A DNS access processor(114) is used to know an address of a location register having location information of the mobile terminal. A policy controller(113) controls a new QoS bearer setup with a mobile communication network according to QoS changes. A proxy server call controller(115) carries out a call processing procedure. A subscriber information manager(116) connects the proxy server call controller(115).
Abstract:
PURPOSE: A device for processing user packets in a GPRS(Generic Packet Radio Service) user plane tunneling protocol layer is provided to independently process packets in a GTP(GPRS Tunneling Protocol)-U layer by using a local memory and a packet handler of the GTP-U layer, thereby transmitting the packets in real time by reducing time delay. CONSTITUTION: An input buffer(404) receives user packets from a lower layer. A local memory(402) stores tunneling information. A packet handler(401) analyzes header information of the packets received through the input buffer(404), extracts tunnel identifier information, retrieves the tunneling information in an external shared memory(420) by using a tunnel identifier if the packets are the first packets, and stores the tunnel information in the local memory(402). If the packets are not first, the packet handler(401) retrieves the tunneling information in the local memory(402). An output buffer controller(403) determines transmitting order of the packets, and controls outputs of the packets. An output buffer(405) inputs the outputted packets, and transmits the packets to the lower layer.
Abstract:
PURPOSE: A signal method of a wireless data interlocking device and a mobile communication exchange is provided to connect the wireless data service interlocking device and the exchange by 4 terminals, and to differently construct data transmitting paths. CONSTITUTION: A mobile communication exchange(31) transmits an occupation signal(301) to a wireless data service interlocking device(32). When the wireless data service interlocking device(32) transmits an occupation confirming signal(302) to the mobile communication exchange(31), the mobile communication exchange(31) transmits a service starting signal(303) to the wireless data service interlocking device(32). The wireless data service interlocking device(32) transmits a service start confirming signal(304) to the mobile communication exchange(31). The mobile communication exchange(31) transmits a release signal to the wireless data service interlocking device(32). The wireless data service interlocking device(32) transmits a release completion signal to the mobile communication exchange(31), and completes a signal exchange procedure.
Abstract:
PURPOSE: An Internet connection method using an end-to-end protocol server in a CDMA(Code Division Multiple Access) mobile communication system is provided to connect a mobile telephone network through a wireless selection by using a portable computer, and to connect to a PPP(Point-To-Point Protocol) server via an end-to-end PPP server or a PSTN(Public Switched Telephone Network). CONSTITUTION: A portable computer(60) inputs a modem command and a receiving phone number by using an application software. An end-to-end protocol connection message is requested to a mobile terminal(10). The mobile terminal(10) requests a call setup to a base station(20) by including a service option. The base station(20) requests a data service call setup to a mobile communication exchange(30). The mobile communication exchange(30) inquiries location information of a receiving terminal to an HLR(Home Location Register)(40), and requires a call setup to a PPP(Point-To-Point Protocol) server(80) connected to a CDMA(Code Division Multiple Access) mobile telephone network by using the information. When the phone number of the receiving terminal is accepted to a PSTN(Public Switched Telephone Network)(50), the call setup is requested to the PPP server(80). The mobile communication exchange(30) requests a traffic channel setup to a wireless data interlocking device(70). The wireless data interlocking device(70) notifies the mobile communication exchange(30) of a traffic channel connection after setting up the traffic channel and initializing a modem. The mobile communication exchange(30) notifies the base station(20) and the mobile terminal(10) of a traffic channel connection with the wireless data interlocking device(70). After the PPP server(80) receives a call setup request, an end-to-end protocol is performed. If a call setup completion is notified after assigning an Internet address, or if a call setup completion is notified via the PSTN(50), the mobile communication exchange(30) notifies the portable computer(60) of the traffic channel connection via the base station(20) and the mobile terminal(10).
Abstract:
본 발명은 이동통신 교환기(IMT-2000)에 관한 것으로서, IMT-2000 이동 가입자가 발신하여 동일 교환기내의 다른 IMT-2000의 이동 가입자를 호출하여 통화를 할 경우인 자국 호에 대한 호 제어 방법에 관한 것이다. 종래 기술의 이동통신 교환기를 통한 자국 호 서비스에서는 음성 위주의 서비스를 제공하고, 데이터 서비스를 위해서는 별도의 처리 절차가 필요하며 국제 표준화가 되지 않는 방식을 사용하고 있는 문제점이 있다. 또한 종래 기술의 비동기 전송 모드(ATM) 교환기를 통한 자국 호 서비스에서는 고정 가입자에서의 통신만을 지원함으로써, 이동환경에 맞지 않는 문제점이 발생되었다. 따라서, 상술한 문제점을 해결하기 위해, 본 발명은 IMT-2000의 가입자의 호 시도로부터 자국 호 판별까지의 과정과, 자국 호 판별 이후 교환기 내부 통화로 할당까지의 과정과, 교환기 내부 통화로 할당 이후 통화 중까지의 과정과, 통화 중에 착신 IMT-2000의 가입자가 먼저 복구할 경우 관련 자원을 해제하고 호를 종료시키는 과정과, 통화 중에 발신 IMT-2000의 가입자가 먼저 복구할 경우 관련 자원을 해제하고 호를 종료시키는 과정으로 이루어진다. 이와 같은 호 제어 방법에 의해, 효율적인 IMT-2000에서의 자국 호 서비스를 제공하는 데 있다.
Abstract:
본 발명은 디지털 셀룰러 이동통신망에서 비동기 데이터 및 팩시밀리 서비스를 제공하기 위한 무선 데이터 서비스 연동 장치와 이동통신 교환기의 접속 방법 및 신호 방법에 관한 것이다.디지털 이동통신망에서 사용되는 무선 데이터 서비스 연동 장치는 디지털 셀룰러 이동통신망과 공중 전화망 사이에 모뎀을 통한 데이터 통신을 가능하게 하고 전송 속도의 부정합을 해결하기 위한 데이터 전송 속도 부정합 기능을 수행한다. 이러한 무선 데이터 서비스 연동 장치의 기능을 효과적으로 수행하기 위해서는 이동통신 교환기와 연동 장치 간에 신호 교환을 위한 복잡한 신호 장치가 필요하며 호가 접속되는데 상당한 시간지연이 발생하는 문제점이 있다.따라서, 무선 데이터 서비스 연동 장치와 교환기 사이를 네 개의 단자로 연결하고 이동통신 교환기가 호의 종류에 따라 단자들을 선택적으로 사용하여 데이터의 전달 경로가 다르게 구성하여 신호를 전달하므로써, 신호 장치를 최소화하고 비용을 절감할 수 있으며 호의 접속 지연 시간을 최소화할 수 있는 디지털 셀룰러 이동통신망에서 비동기 데이터 및 팩시밀리 서비스를 위한 무선 데이터 연동 장치와 이동통신 교환기의 접속 방법 및 신호 방법이 제시된다.
Abstract:
본 발명은 무선 데이터 통신 연동 장치에서의 호 제어 방법에 관한 것으로, 특히 디지털 이동 통신망에서 비음성 서비스 중의 하나인 비동기 데이터 서비스를 제공하기 위한 방법으로 이동 가입자가 데이터 단말기로 다른 이동 가입자의 데이터 단말기와 데이터를 주고 받거나 공중 데이터 베이스를 검색하기 위한 발신호 제어 방법과 이동 가입자의 데이터 터미널로 착신하기 위한 착신호 제어 방법 및 데이터의 전송 절차와 설정된 호의 해제에 대한 제어 방법이 제공되며, 이동 통신망의 특성상 무선 구간의 열화나 가입자의 이동으로 인한 핸드 오프의 발생시 전송되는 데이터의 손실에 대해 전송 계층의 프로토콜을 적용하여 손실된 데이터를 복구하여 줌으로써 신뢰성 있는 데이터 전송을 보장할 수 있는 디지털 이동 통신망 무선 데이터 통신 연동 장치에서의 호 제어 방법이 제시된다.