Abstract:
본 발명은 기지국과, 상기 기지국이 서비스하는 서비스 영역내에 존재하는 다수의 가입자 단말기들을 가지는 광대역 무선 접속 통신 시스템에서, 상기 기지국이 상기 가입자 단말기들로 채널 정보를 송신하는 방법에 있어서, 상기 기지국의 K개의 채널 정보들을 미리 설정한 제1 타입,길이,값(TLV: Type, Length, Value) 인코딩 방식으로 인코딩하여 상기 K개의 제1 TLV 인코딩 채널 정보들을 생성하는 과정과, 상기 K개의 제1 TLV 인코딩 채널 정보들을 생성한 후, 해당 TLV 인코딩 채널 정보가 미리 설정한 제2타입 TLV 인코딩 방식으로 인코딩하여 생성된 제2 TLV 인코딩 채널 정보임을 나타내는 Type 정보와, 상기 제2 TLV 인코딩 채널 정보내의 상기 K개의 채널 정보들의 길이를 나타내는 Length 정보와, 상기 제2 TLV 인코딩 채널 정보내의 상기 K개의 채널 정보들 각각을 나� �내는 상기 K개의 Value 정보들을 포함하는 상기 제2 TLV 인코딩 채널 정보를 생성하는 과정과, 상기 제2 TLV 인코딩 채널 정보를 상기 가입자 단말기들로 송신하는 과정을 포함함을 특징으로 한다. TLV 인코딩, 단일 TLV 인코딩, 업링크 채널 정보, 다운링크 채널 정보, TLV 인덱스 포함 플래그 비트 맵, TLV 인덱스 포함 플래그 비트맵 사이즈
Abstract:
본 발명은 광대역 무선 접속 통신 시스템에서 트래픽 데이터 스케쥴링 방법에 있어서 데이터 트래픽을 각각의 트래픽 클래스로 구분하고 상기 구분된 각각의 트래픽 클래스의 특성에 전송 순서와 전송량을 결정한다. 그리고 각 트래픽 클래스마다 상기 전송 순서와 전송량을 고려하여 전송우선순위를 할당한 후에 상기 전송우선순위에 상응하게 부채널 및 심볼 블록을 할당하여 단말에게 전송한다.
Abstract:
본 발명은 광대역 무선 접속 통신 시스템에서, 이동 가입자 단말기가 서빙 기지국에서 타겟 기지국으로 핸드오버해야함을 검출하면 상기 서빙 기지국에서 상기 타겟 기지국으로 연결 전환한 후 상기 타겟 기지국과 네트워크 재진입 동작을 수행하는 중에 핑퐁 현상이 발생함을 검출하면, 상기 타겟 기지국에서 서빙 기지국으로 연결 전환할 것임을 상기 타겟 기지국에 보고하고; 상기 타겟 기지국은 상기 보고에 상응하여 상기 이동 가입자 단말기가 상기 타겟 기지국에서 서빙 기지국으로 연결 전환할 것임을 상기 서빙 기지국에 통보하며; 상기 서빙 기지국은 상기 통보에 상응하여 상기 이동 가입자 단말기로 비경쟁 기반의 레인징 자원을 할당함으로써 상기 이동 가입자 단말기가 상기 비경쟁 기반의 레인징 자원을 사용하여 상기 서빙 기지국과 통신 서비스를 연결하도록 하여 핑퐁 현상에 따른 서비스 지연을 최소화한다.
Abstract:
본 발명은 직교 주파수 분할 다중 접속 방식의 이동통신 시스템에 관한 것으로, 하나 이상의 서브캐리어들을 하나의 서브 채널로 설정하여 전체 주파수 대역을 복수의 서브 채널들로 구분하고, 상기 각각의 서브 채널들을 하나 이상의 사용자 단말기들에게 할당하는 방법에 있어서, 상기 각 사용자 단말기들로부터 각 서브 채널별 채널 상태 정보를 수신하는 과정과, 상기 수신된 각 사용자 단말기들의 서브 채널별 채널 상태 정보를 소정의 임계값과 비교하고, 상기 수신된 채널 상태 정보가 상기 임계값보다 클 경우의 횟수를 누적하여 카운트하는 과정과, 상기 각 서브 채널별로 소정의 주기 동안 저장된 상기 카운트 된 값들로부터 상기 임계값보다 큰 경우의 평균 발생 길이를 산출하는 과정과, 상기 산출된 평균 발생 길이로부터 임계값보다 크게 되� � 상태의 추정값을 산출하는 과정과, 상기 산출된 추정값을 크기에 따라 상기 서브 채널 별로 정렬하고, 상기 정렬된 순서에 따라 상기 각 사용자 단말기 별로 서브 채널을 할당하는 과정을 포함함을 특징으로 한다.
Abstract:
PURPOSE: A method for performing an uplink access in a broadband mobile communication system is provided to reduce a standby time taken for re-connection in case of channel congestion. CONSTITUTION: A terminal(400) transmits a bandwidth request message to a base station(450) through an access channel, namely, a contention-based connection channel in an uplink(411). The terminal(400) transmits the same bandwidth request message to the base station(450) after the lapse of a random backoff time(413). The terminal(400) re-attempts transmission of the same bandwidth request message after the lapse of the random backoff time(415). If there is no bandwidth as requested by the terminal(400)(417), the base station transmits a bandwidth request rejection message to the terminal(400)(419). Upon receiving a dedicated PN code, waiting time information, dedicated PN code lifetime information through the bandwidth request rejection message, the terminal(400) waits for the waiting time without attempting re-connection(423). When the waiting time elapses, the terminal(400) performs a contention-free connection to the base station by using the dedicated PN code as allocated within the dedicated PN code lifetime(427).
Abstract:
PURPOSE: An apparatus and method for controlling operational states of an MAC(Media Access Control) layer in a broadband wireless access communication system are provided to maximize data transmission efficiency by minimizing power consumption when data transmission/reception is suspended and performing fast access when data transmission/reception is resumed. CONSTITUTION: When a subscriber terminal normally enters a network, monitors a DL-USCCH(Downlink-Uplink Scheduling Channel) transmitted from a base station and senses that there is data to be transmitted to the subscriber terminal, the subscriber terminal is transited from an initial state(213) to a traffic state(1311). If the subscriber terminal loses synchronization with the base station due to a system error in the traffic state, the subscriber terminal is transited to a null state(211) to perform an initial operation(1321). When the subscriber terminal senses that there is data to be transmitted from the base station to the subscriber terminal in a sleeping state(215), the subscriber terminal enters an active mode(1300) of the traffic state(1313). When data transmission/reception between the base station and the subscriber is completed, the subscriber terminal is transited to the sleeping state(215)(1315). When the subscriber terminal successfully accesses an uplink in an access state(217), the subscriber terminal enters the active mode(1300) of the traffic state(1319) or enters a fast access mode(1330)(1317).
Abstract:
PURPOSE: A method and a system for generating an Internet protocol address in an Internet protocol system and a method and a system for delivering messages using the same are provided to accelerate an IP acquisition and to reduce a bandwidth by reducing time delay during IP generation. CONSTITUTION: A system for generating an IP(Internet Protocol) address in an Internet protocol system includes at least one mobile terminal(400), a base station(480), and a router(490). The mobile terminal generates and transmits a first MAC(Media Access Control) layer connection message having its MAC address and a field representing whether high speed address setting is enabled. The mobile terminal receives a second MAC connection message having a prefix of a sub-network to which the mobile terminal belongs and generates the IP address. The base station receives the first MAC connection message, determines whether the MAC address belongs to the same sub-network, and transmits the second MAC connection message having its prefix to the mobile terminal.