Abstract:
본 발명은 주파수 선택적 기저대역의 주파수 변복조 장치 및 방법, 이를 이용한 송수신 장치에 관한 것으로, 주파수 선택적 기저대역 전송기술 또는 주파수 선택적 코드분할다중접속(FS-CDMA) 기술에서 통신 채널 환경에 따라 전송률을 제어하고, 반복적인 확산부호 그룹 선택을 통하여 수신측에서 주파수 다이버시티 이득을 얻도록 함으로써 사용자 서로에게 간섭을 줄일 뿐만 아니라 다른 전자기기로부터 유기되는 강한 간섭이 있을 때에도 저전력이고, 안정적인 인체 통신을 구성할 수 있으며, 통신 품질을 보장할 수 있는 효과가 있다. 주파수 선택적 기저대역, 통신, 확산부호, 월시코드
Abstract:
An adaptive modulation apparatus and a method using a multiple antenna selective method and using a plurality of antennas are provided to minimize the frequency efficiency and the antenna selection delay by communicating data according to the channel environment of an antenna. A multiple antenna transmission apparatus(101) selects one transmission antenna among a plurality of transmission antennas(103). The purpose transmission rate of the selected transmission antenna is determined. A multiple antenna receiving device(105) selects one RX-antenna among a plurality of RX-antennas(107). By utilizing the selected RX-antenna, the purpose transmission rate is received from the multiple antenna transmission apparatus. The channel status value of RX-antenna is measured based on the received purpose transmission rate. The channel status value is the received signal power, SNR(Signal to Noise Ratio), and the value of LLR(Log Likelihood Ratio).
Abstract:
The apparatus and method for frequency modulating and demodulating of frequency selective baseband with gain of frequency diversity, and apparatus for transmitting and receiving using for the same are provided to guarantee the stable communications against the strong noises. The MAC/PHY interface(100) performs interface of the modem of MAC with the physical layer. The MAC/PHY interface comprises the TX FIFO(110) and TX REG(120). The TX FIFO processes transmission data received from the higher layer. The TX REG processes the information and the header controlling the transmitter(200). Transmitter comprises the preamble generation(210), the header generator(220), the spreader(230), data generator(240), the scrambler(250), the serial-parallel converter (S2P)(260), the frequency selective spreader(270), the multiplexer(280) and transmission rate controller(290).
Abstract translation:提供了频率分集增益的频率选择性基带的频率调制和解调装置和方法,以及用于发送和接收使用的装置,以保证与强噪声的稳定通信。 MAC / PHY接口(100)执行MAC的调制解调器与物理层的接口。 MAC / PHY接口包括TX FIFO(110)和TX REG(120)。 TX FIFO处理从较高层接收的传输数据。 TX REG处理信息和控制发射机(200)的报头。 发射机包括前导码生成(210),标题生成器(220),扩展器(230),数据生成器(240),加扰器(250),串行 - 并行转换器(S2P)(260),频率选择扩展器 (270),多路复用器(280)和传输速率控制器(290)。
Abstract:
본 발명에 의한 인체접촉 감지를 이용하는 통신 장치 및 그 방법은 중앙처리장치 및 인체와 접속하여 통신을 수행하는 통신 장치에 있어서, 인체와 접촉을 하는 전극; 상기 전극과 연결되어 상기 접촉을 감지하면 상기 중앙처리장치의 동작 개시를 지시하는 접촉감지부; 및 상기 중앙처리장치로부터 데이터의 송수신을 선택하는 제어신호를 수신하여 그에 따라 송신 또는 수신을 수행하는 데이터처리부;를 포함하는 것을 특징으로 하며, 인체를 매질로 하는 통신 장치에 있어서 인체와의 접촉이 이루어지기 전 대기 상태에서의 소비 전력을 줄이기 위해 인체의 접촉 감지부를 삽입하여 접촉이 이루어지기까지 마이크로 컨트롤러 및 송수신 회로의 소비 전력을 최소화하는 방식으로, 매우 적은 소비 전력을 갖는 접촉 감지부의 사용으로 대기 시 소비 전력을 최소화하여 이동 기기의 대기 시간을 연장하는 효과가 있다.
Abstract:
A method and a system for hierarchically communicating information by using a cache server is provided to alleviate a bottleneck situation caused by the direct request for information from a terminal to a final information providing server. A method for hierarchically communicating information comprises the following several steps. A user inputs an information request message for desired information to the terminal(S410). It is determined whether information read from the sensor node matches the desired information requested by the user, and if so, the read information is displayed on the terminal(S420-S440). The user checks the displayed information, and sends the information request message to the sensor node(S460) if more detailed information is required(S450). The sensor node transmits information corresponding to the information request message to the terminal if the corresponding information is found in the cache of the sensor node(S461). If the corresponding information is not found in the cache of the sensor node, the sensor node sends the information request message to the cache server(S470). The cache server searches for the corresponding information in its cache(S471). If the corresponding information is found in the cache of the cache server, the cache server transmits the found information to the sensor node(S473). If the corresponding information is not found in the cache of the cache server, the cache server receives the corresponding information by connecting to the information providing server, updates its cache and updates its cache, and transmits the received information to the sensor node(S472).
Abstract:
인체를 이용한 통신장치 및 그 방법이 개시된다. 통신장치는 신호의 전송방향에 따른 신호전극 및 접지전극의 배치방향 및 송수신 거리에 따른 접지전극의 인체 접촉여부를 결정한 후 인체를 통해 연결된 타 통신장치와 데이터 통신을 수행함으로써 신호손실을 최소화한다.
Abstract:
1. 청구범위에 기재된 발명이 속한 기술분야 본 발명은 노면 설치용 교통정체정보 제공 장치 및 그 방법에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 도로상에서 발생하는 도로소통정보(하중, 진동, 소음)를 수집하고 그 수집된 도로소통정보를 토대로 교통정체 여부, 교통정체 유형 등의 도로소통상황 정보를 획득하여 사용자(운전자)에게 시각적으로 제공함으로써, 사용자(운전자)가 전방의 도로소통상황을 실시간으로 인식하여 미리 사고를 예방할 수 있게 하는, 노면 설치용 교통정체정보 제공 장치 및 그 방법을 제공하는데 그 목적이 있음. 3. 발명의 해결방법의 요지 본 발명은, 노면설치용 교통정체정보 제공 장치에 있어서, 도로상에서 운행중인 차량에 대한 하중 정보, 도로상에서 발생하는 진동 및 소음정보를 수집하기 위한 도로소통정보 수집 수단; 상기 수집된 하중정보, 진동정보 및 소음정보를 이용하여 교통정체여부 및 교통정체유형을 판정하기 위한 교통정체 판정 수단; 상기 교통정체 판정 수단에서 교통정체로 판정된 경우에 한하여 '상기 교통정체 판정 수단에서의 판정 결과'와 '교통정체정보 송출지점까지의 거리산출을 위한 부가정보'를 포함하는 교통정체정보를 송출하거나, 전방의 다른 노면설치용 도로정체정보 제공 장치로부터 전달되는 전방의 교통정체정보를 수신하여 '교통정체정보 송출지점까지의 거리' 및 '교통정체유형'을 획득한 후 상기 수신한 전방의 교통정체정보를 후방으로 전달하기 위한 교통정체정보 송수신 수단; 및 상기 교통정체 판정 수단에서의 판정 결과를 디스플레이하거나, 또는 상기 교통정체정보 송수신 수단에서 획득된 거리정보 및 교통정체유형 정보에 따라 전방의 도로소통상황을 디스플레이하기 위한 디스플레이 수단을 포함함. 4. 발명의 중요한 용도 본 발명은 노면 설치용 및 차량 탑재용 교통정체정보 제공 등에 이용됨. 노면 설치용, 차량 탑재용, 교통정체정보, 도로소통정보, 도로소통상황, LED 지시판
Abstract:
A communication method and a communication device using a human body are provided to minimize a signal loss by adjusting arrangement directions of signal electrodes and ground electrodes according to a signal transmission direction. A communication device using a human body includes an electrode unit, electrode selection switches(540,545), a transmitter(510), and a switch controller(555). The electrode unit includes at least one electrode pair having a signal electrode(530) and a ground electrode(535). The electrode pairs are arranged in at least one direction. The electrode selection switches select one of the electrode pairs. The transmitter outputs data signals to the human body through the selected electrode pair. The switch controller transmits a test signal to another communication device, which is connected to the communication device through the human body, through the electrode pairs, and a signal loss is measured. The switch controller controls the electrode selection switch to select the electrode pair with the minimum signal loss.
Abstract:
본 발명은 보안 여부나 전송 거리에 따라 구분되는 주파수를 사용하는 통신 장치를 개시한다. 본 발명에 의하면, 정보 보안성이 필요한 근거리 통신에는 소정의 주파수 이하의 주파수 대역을, 정보 보안성이 요구되지 않는 근거리나 원거리 통신에는 상기 소정 주파수 이상의 주파수 대역을 전송 주파수로 사용하여, 전송 매체의 주파수 특성을 고려하여 전송되는 정보의 보안 유지 여부, 전송되는 통신 거리와 통신 특성에 맞는 효율적인 통신 환경을 제공할 수 있다.
Abstract:
인체 안테나를 이용한 지상파 DMB 수신 장치 및 그 방법이 개시된다. 전극은 인체와 접촉되고, 증폭부는 지상파 중계기를 통해 송출된 DMB 방송 신호에 대응하여 인체에 흐르는 전류를 전극을 통해 수신하고 증폭한다. 그리고 임피던스 정합회로는 전극 및 저주파 증폭부 사이에 위치하여 인체의 임피던스와 저주파 증폭부의 임피던스를 정합한다. 이로써, 별도의 안테나를 구비하지 않아 휴대가 간편한 지상파 DMB 수신 장치가 구현된다. 지상파 DMB, 인체 안테나, 저주파 증폭, 임피던스 정합