Abstract:
본 발명은 마이크로 셀과 매크로 셀의 계층구조를 이용한 셀간 하드 핸드오프 감소 방법에 관한 것이다. CDMA 이동통신 시스템 마이크로 셀 환경에서 마이크로 셀간의 하드 핸드오프의 처리는 마이크로 셀간의 소프트 핸드오프의 처리에 비해 상당히 어려울 뿐만 아니라 핸드오프 수행 중 호가 끊어질 확률도 매우 높으므로 서비스 품질 저하를 야기시킬 수 있다. 따라서, 본 발명에서는 마이크로 셀과 매크로 셀을 중첩시킨 계층 구조를 사용하여 마이크로 셀간의 하드 핸드오프가 발생할 경우 이를 비교적 처리가 단순한 마이크로 셀과 매크로 셀간의 하드 핸드오프로 변환시켜 핸드오프를 수행시킨다. 이러한 방법은 마이크로 셀간의 핸드오프의 수를 감소시키는 효과와 함께 시스템의 성능을 향상시킬 수 있다. 이때, 마이크로 셀에 대한 주파수 집합과 매크로 셀에 대한 주파수 집합은 다르게 할당되며, 또한 매크로 셀들에는 동일한 주파수를 할당하지만 마이크로 셀들에는 트래픽 양에 따라 마이크로 셀에 대한 주파수 집합내의 주파수 집합들을 할당한다.
Abstract:
본 발명은 CDMA 이동통신 시스템에서의 하드 핸드오프의 감소방법에 관한 것으로서, 그 특징은, CDMA 시스템에서 통신 서비스의 전지역을 작은 셀로 구분하여 각 셀마다 통신 채널을 할당하는 통신 채널 할당방법에 있어서, 소정개수의 분할수단을 이용하여 셀의 중심을 기준을 해당 셀을 동심원 모양의 소정개수의 영역으로 분할하는 제1과정과, 인접 셀에 할당되지 않은 채널을 셀 중심과 가장 가까운 영역에 할당하는 제2과정과, 상기 인접 셀에 할당된 채널을 셀 중심과 가장 떨어진 영역에 할당하는 제3과정 및 상기 제2과정에서 할당된 채널과 상기 제3과정에서 할당된 채널 모두를 상기 제2과정과 제3과정에서 채널을 할당받지 못한 영역에 할당하는 제4과정을 포함하는 데에 있으며, 그 효과는, CDMA 시스템에서의 인접 셀에 할당되지 않은 무선 채널이 당된 경우에 셀간 하드 핸드오프의 발생을 방지할 뿐만 아니라 호손률도 일정 수준 이하로 유지하며, 특히 셀 내의 하드 핸드오프의 수를 감소시켜 전체적으로 통화 품질을 향상시킬 수 있는 데에 있다.
Abstract:
본 발명은 부호분할 다중접속(CDMA:Code Division Multiple Access) 이동통신시스템에서, 셀 경계 부근에서의 소프트 핸드오프방법에 관한 것으로서, 통화 중인 임의의 이동단말이 셀 사이를 이동하여 소프트 핸드오프를 수행할 경우에, 이동단말의 통화품질과 타겟기지국의 채널 사용상태에 따라 핸드오프 파라미터의 임계값을 가변시키면서 이동단말의 소프트 핸드오프 수행 여부가 결정되도록 한다. 이러한 목적을 달성하기 위한 본 발명은, 이동단말과 관장기지국 및 타겟기지국을 포함하는 디지털 이동통신시스템에서의 소프트 핸드오프방법에 있어서, 상기 이동단말로부터 핸드오프 요구 메시지를 수신한 상기 관장기지국은, 이동단말의 통화품질과 상기 타겟기지국의 채널 사용상태에 따라 핸드오프 수행 여부를 결정하는 것을 특징으로 한다.
Abstract:
PURPOSE: A method for controlling a new call in a hierarchical cell structure is provided to make a distance between a terminal and a micro base station close for minimizing a forward link signal interference between terminals by operating variably a new assigned area of micro cell according to an amount of traffic. CONSTITUTION: When a terminal tries a new call, an intensity(TPWR) of signal of micro cell is measured(S201) and transmitted to the terminal(S202). On the other hand, a micro base station calculates a value of power parameter(TNEW) and send it to the terminal(S206). Then, the intensity(TPWR) and the value of power parameter(TNEW) are compared with each other(S203). If the intensity(TPWR) exceeds the value of power parameter(TNEW), the terminal performs a new call setup in the micro cell because the terminal is within the area of micro cell(S204). If the intensity(TPWR) is smaller than the value of power parameter(TNEW), the terminal performs the new call setup in a macro cell(S205)
Abstract:
PURPOSE: A call connection method considering a hand-off decrement and a traffic distribution of cells in a hierarchy structure is provided to divide usable frequencies into frequency sets for a macro cell and a micro cell, and to endow the macro cell with a highest priority than the micro cell, then to make a mobile terminal connect to the macro cell. CONSTITUTION: A base station has a hierarchy structure which a micro cell(102) and a macro cell(101) are overlapped. Frequency sets for a call connection endowed with various priorities are assigned to mobile terminals. When the call connection is requested, frequencies are evenly distributed to the mobile terminals in order not to generate load. A traffic distribution of cells is controlled. The call connection is firstly requested to the macro cell(101). When a mobile terminal number moving at a high speed or a busy mobile terminal number is less, the mobile terminals use frequencies of the macro cell(101). When a frequency channel for a new call of the macro cell(101) is unusable, when the mobile terminals moves at a low speed, the call connection is attempted to the micro cell(102), and the mobile terminals use the frequencies of the macro cell(101) having a wider service area than that of the micro cell(102).
Abstract:
PURPOSE: A soft handoff method in a mobile communication system using a CDMA(Cord Division Multiple Access) is provided to prevent the handoff trial being failed in middle of a process in a Q. CONSTITUTION: A soft handoff method in a mobile communication system using a CDMA(Cord Division Multiple Access) comprises the steps of: deciding whether a available traffic channel in a target base station, which receives handoff demand messages from a control base station according to a demand of a soft handoff from a mobile terminal, exists; transmitting the allowing handoff messages to the base station, which the traffic channel is allocated, when the traffic channel exists; storing a call of the mobile terminal, which required the soft handoff in the suspended Q, when the traffic channel does not exist, and transmitting the handoff suspended messages to the control base station, after queuing the suspended Q according to the required time of currently using channel numbers, from each mobile terminal, and the required time of the handoff; transmitting the allowing handoff messages to the control base station, after allocating the traffic channel to a prior mobile terminal from the suspended Q, according to the traffic channel's generating; transmitting one message of the handoff suspended messages and a handoff command message, to the mobile terminal in the control base station according to the message, which is received from the target base station.
Abstract:
1. 청구범위에 기재된 발명이 속한 기술분야 이동 통신 2. 발명이 해결하고자 하는 기술적 과제 이동 단말인 경우 마이크로 셀 영역내에서 핸드 오프가 지나치게 자주 수행됨. 3. 발명의 해결 방법의 요지 이동 단말의 속도를 고속 및 저속으로 분류하여 분류된 속도에 따라 핸드 오프 형태를 결정하여 요구함. 4. 발명의 중요한 용도 이동 통신에서 이동 단말의 핸드 오프 제어
Abstract:
본 발명은 CDMA 시스템에서 트래픽이 불균등한 환경에서 셀별 무선 채널 할당이 다른 경우 무선 채널의 운용 및 제어 방법에 관한 것으로, 셀의 중앙부에는 인접 셀에서 사용하지 않는 채널을 할당하고 셀의 경계 부분에는 인접에서 사용하는 채널을 할당하므로써 셀간 하드 핸드오프를 줄이고, 또한 진행 중인 호의 영역 경계를 신규호의 영역 경계와 달리하므로써 셀내에서의 하드 핸드오프를 줄일 수 있는 CDMA 시스템에서 세 개의 지연 영역 구분에 의한 셀간 하드 핸드오프 제거 방법이 제시된다.