Abstract:
PURPOSE: A data processing method, an equalizer, and a receiver are provided to generate an equalization signal by multiplying a weight vector to a base station signal and a relay signal. CONSTITUTION: A base station signal is received from a base station(S610). A relay signal is received from a relay(S620). Propagation delay between the relay signal and the base station signal is determined(S630). An equalization signal alleviating the interference between the base station signal and the relay signal is generated in consideration of the propagation delay(S640). An information bit transmitted by the base station is restored from the equalization signal(S650). The equalization signal is generated by multiplying a weight vector to the base station signal and the relay signal. [Reference numerals] (S610) Base station signal receiving; (S620) Relay signal receiving; (S630) Propagation delay determination; (S640) Equalization signal generation; (S650) Information bit restoration
Abstract:
PURPOSE: An apparatus and method for synchronization of an RF repeater are provided to detect a start time of an uplink signal by calculating each power of an uplink signal and a downlink signal. CONSTITUTION: In an apparatus and method for synchronization of an RF repeater, a power calculating unit(254) calculates the power of a received signal. The power calculating unit outputs the power value of the received signal. A normalization unit(255) outputs a first signal correlation value and a second signal correlation value which are outputted from a complex multiplication part and a power value calculated from the power calculation unit. The normalization [normalization unit](255) outputs the which is normalized by using the first signal correlation value which outputs and the power value calculated in the second signal correlation value and power calculation part from the complex multiplication part and the normalized second signal correlation value. A subtractor(256) substracts normalized first signal correlation value and the second signal correlation value. The subtracor detects the start time of a second signal.
Abstract:
PURPOSE: An RF(Radio Frequency) synchronizing method and a method thereof are provided to output a synchronized signal according to the set rate by establishing the uplink and downlink rate. CONSTITUTION: A wireless repeater establishes an initial ratio of the uplink section and downlink section using the usage of the length of the estimated DL signal(S202). Based on in the initial ratio, a wireless repeater senses the upward link signal. The wireless repeater detects the initial ranging signal from the uplink signal(S203). Based on in the initial ranging signal, the wireless repeater resets the rate of the uplink period and downlink section(S208).
Abstract:
A device for testing a modem of a wireless communication system and a method therefor are provided to test the modem which transmits/receives a plurality of signals corresponding to each wireless channel. A signal processing unit(410) controls the power of the first transmission signal. A transmission memory(420) and a reception memory(430) receive and temporarily stores the first transmission signal from the signal processing unit. According to a control signal, a wireless signal processing unit(440) receives or transmits the second received signal. A channel is formed by a plurality of antennas which the mobile station and base station include.
Abstract:
본 발명은 직교 주파수분할 다중 접속 시스템에서 주파수 오프셋을 효율적으로 추정하고 보상할 수 있는 직교 주파수 분할 다중 접속 시스템의 주파수 오프셋 보상 장치 및 그 방법에 관한 것이다. 직교 주파수 분할 다중 접속 시스템의 수신기가 하향링크의 프리앰블 신호를 이용하여 소수배 주파수 오프셋과 정수배 주파수 오프셋을 별도로 추정할 수 있는 구조를 가짐과 동시에 소수배 주파수 오프셋의 보상이 완료된 이후에 정수배 주파수 오프셋을 한번을 추가하여 주파수 오프셋을 보상하여 효율적으로 주파수 오프셋을 보상할 수 있도록 한다. OFDMA, 주파수 오프셋(frequency offset), 보상, 프리앰블
Abstract:
An automatic gain controller in a mobile communication system and its method are provided to reduce an SNR(Signal-to-Noise Ratio) by controlling a reception gain based on a reception gain reference value set to correspond to an omnidirectional beam signal in an area where a channel environment between a terminal and a base station is bad. A VGA(Variable Gain Amplifier)(100) amplifies a downlink signal according to a reception gain amplification value, namely, an amplification size of a reception signal. A reference value setting unit(130) outputs a reception gain reference value set to be different according to whether the downlink signal includes a directional beam signal. An average value calculating unit(120) outputs a reception gain average value by accumulating gains of signals amplified by the VGA(100) during a preamble interval of the downlink signal. An adder outputs a gain difference value between the reception gain reference value received from the reference value setting unit(130) and the reception gain average value received from the average value calculating unit(120) as the reception gain amplification value.
Abstract:
본 발명은 직교 주파수 분할 다중 시스템에서의 부반송파 할당 장치 및 방법과, 부반송파 역할당 장치 및 방법에 관한 것이다. 본 발명에 따른 부반송파 할당 장치는 데이터 부반송파를 피지컬 인덱스로 할당하기 위해 로지컬 인덱스를 생성한 후, 로지컬 인덱스와 파일럿 위치상수와의 특정 연산을 통해 중간 인덱스로 변환하고 보호구간(Guard Interval)인 널 부반송파의 삽입을 위해 상기 널 부반송파의 좌우에 할당하는 데이터의 개수에 기초하여 피지컬 인덱스로 변환하여 전송한다. 그리고 본 발명에 따른 부반송파 역할당 장치는 수신한 피지컬 인덱스를 로지컬 인덱스로 매핑하기 위해 널 부반송파를 먼저 구분하기 위한 중간 인덱스로 변환한 후, 로지컬 인덱스로 변환한다. 이 때, 피지컬 인덱스를 로지컬 인덱스로 매핑할 때 9로 나눈 나머지와 몫을 이용하여 데이터와 파일럿을 구분한다. 이와 같이 본 발명에 따르면, 데이터와 파일럿을 구분할 때, 대용량의 롬 테이블을 사용하지 않아도 되므로 하드웨어의 크기를 줄일 수 있는 효과가 있다. OFDM, 부반송파, 데이터, 파일럿, 널(NULL), 로지컬, 피지컬, 연산
Abstract:
An apparatus and a method for testing AP/AT modems of a high-speed portable Internet system are provided to test receiver modems of the AP/AT by generating transmitter signals of an OFDMA type and transmitting the generated transmitter signal to receiver modems of the AP/AT, and test transmitter modems of the AP/AT by receiving and analyzing signals outputted from the transmitter modems of the AP/AT, thereby testing both of AP/AT modems in the high-speed portable Internet system. A simulation tester(210) generates a transmitter signal of an OFDMA(Orthogonal Frequency Division Multiple Access) type which will be respectively transmitted to receiver modems(300) of the AP and AT, receives and analyzes a receiver signal outputted from transmitter modems(300) of the AP and AT, and generates plural control commands for the transmitter signal and the receiver signal. A test board(220) transmits each transmitter signal to the corresponding receiver modem(300) based on the control command, and transmits the each receiver signal to the simulation tester(210).
Abstract:
본 발명은 직교주파수 분할 다중 접속(OFDMA) 시스템의 상향 링크에서 제어 채널과 다이버시티 채널의 부채널 할당을 위한 타일 인덱스 발생 장치, 및 다이버시티 채널 및 적응형 변조 코딩(AMC) 채널의 부채널 할당 장치에 관한 것이다. 본 발명에 따르면, 직교주파수 분할 다중 접속방식에서 상향 링크 부채널 할당을 위한 최적 설계 구조를 가입자 단말의 변조부와 기지국 복조부에게 제공함으로써, 상향 링크 부채널 할당 장치의 복잡도를 감소시키고, 전송 속도를 개선할 수 있다. OFDMA, 상향링크, 서브채널, 부채널 할당, 제어 채널, 다이버시티, AMC
Abstract:
본 발명은 부채널수 변화에 따른 이득값 조절이 가능한 직교주파수분할다중접속 시스템의 송신장치 및 그 장치에서의 데이터 송신방법에 관한 것이다. 이 장치는 부채널수의 변동에 따른 변조기에서의 최대 출력값이 일정하도록 그 이득을 조절하기 위해 부채널수 결정기, 변조기, 디지털/아날로그 변환기 및 이득 제어기를 포함한다. 부채널수 결정기는 통신환경에 따라 사용하는 부채널수를 결정하고, 변조기는 부채널수 결정기에 의해 결정된 부채널수에 기초하여 송신 데이터를 변조 처리하여 출력한다. 디지털/아날로그 변환기는 변조기에서 출력되는 송신 데이터를 아날로그 데이터로 변환하여 송신용 안테나를 통해 무선으로 송신한다. 이득 제어기는 부채널수 결정기에서 결정된 부채널수에 대응되는 이득값-여기서 이득값은 변조기에서 디지털/아날로그 변환기로 입력되는 출력값이 일정하도록 부채널수에 따라 결정되어 있음-에 따라 변조기에서 디지털/아날로그 변환기로 입력되는 송신 데이터의 이득을 제어한다. 본 발명에 따르면, 송신신호의 신호대잡음비를 일정하게 유지시켜서 부채널수의 변화에 따라 전체적인 성능열화를 제거할 수 있다. 직교주파수분할다중접속 시스템, OFDMA, 부채널, 부채널수, 이득 조절