公开(公告)号：KR100406252B1

公开(公告)日：2003-11-14

申请号：KR1020010082599

申请日：2001-12-21

Applicant: 한국전자통신연구원 ,  주식회사 케이티프리텔

Inventor： 이광천 ,  조권도 ,  김지연

IPC: H04B1/40

Abstract: PURPOSE: A method for inactivating a receiving function of a mobile communication terminal is provided to enable a mobile communication terminal user to use an additional function only while a receiving function is inactivated, thereby preventing any interference caused by a receiving call while using the additional function. CONSTITUTION: A controller receives a call message(S100), and reads a value of a receiving rejection flag stored in a memory(S110). The controller decides whether the value is '1'(S120). If so, the controller decides whether a telephone number of the call message is the same as a self number(S130). If so, the controller records a receiving fact in a receiving rejection mode memory(S140). If the value is '0', the controller decides whether the telephone number of the call message is the same as the self number(S150). If so, the controller sets a wireless speech path to make a call(S160).

Abstract translation: 目的：提供了一种用于使移动通信终端的接收功能失活的方法，以使得移动通信终端用户仅在接收功能失效时才能使用附加功能，从而防止在使用附加功能的同时接收呼叫造成的任何干扰 。 构成：控制器接收呼叫消息（S100），并读取存储在存储器中的接收拒绝标志的值（S110）。 控制器判定该值是否为'1'（S120）。 如果是，则控制器判定呼叫消息的电话号码是否与自身号码相同（S130）。 如果是，则控制器将接收事实记录在接收拒绝模式存储器中（S140）。 如果该值为'0'，则控制器判定呼叫消息的电话号码是否与自身号码相同（S150）。 如果是，则控制器设置无线话音路径以进行呼叫（S160）。

公开(公告)号：KR100399058B1

公开(公告)日：2003-09-26

申请号：KR1020010066404

申请日：2001-10-26

Applicant: 한국전자통신연구원

Inventor： 조권도 ,  김진경 ,  배정숙 ,  진성근

IPC: H04W4/20 ,  H04W4/16

Abstract: PURPOSE: An image call processing method of a mobile communication system is provided to induce the conversion of an image call into a voice call to a transmitter without rejecting an image call in a case that a destination terminal can not apply the image call when there is an image call request. CONSTITUTION: A mobile terminal(10) is within a scope of an optional base station(20). The information of the mobile terminal(10) is transmitted to a mobile exchange(40) through base stations(20) and base station controllers(30) for controlling the base stations(20). The information transmitted from the mobile exchange(40) is transmitted to the mobile terminal(10) for receiving a mobile communication service through the base stations(20) and the base station controllers(30) for controlling the base stations(20). The base station(20) plays a role for making the mobile terminal(10) connect to the base station controller(30). The base station(20) consists of a DCU(Digital Channel Unit), a TCU(Timing/frequency Control Unit), a radio frequency unit and a global position system, and performs various functions for subscribers. The base station controller(30) connects the base station(20) to the mobile exchange(40) and controls the connection among base stations. The base station controller(30) also processes and applies a softer, soft and hard handover etc. and performs a signal processing function for the communication with the base station(20) and the mobile exchange(40). The mobile exchange(40) includes an embedded visitor location register. The mobile exchange(40) transmits/receives a signal to/from the base station controller(30), several base stations(20) and a base station management system and thus processes a call of a mobile communication subscriber.

Abstract translation: 目的：提供一种移动通信系统的图像通话处理方法，以在目的地终端不能应用图像通话的情况下，在不存在图像通话的情况下引发图像通话向发送方的语音通话的转换 图片通话请求。 构成：移动终端（10）在可选基站（20）的范围内。 移动终端（10）的信息通过用于控制基站（20）的基站（20）和基站控制器（30）被发送到移动交换机（40）。 从移动交换机（40）发送的信息通过用于控制基站（20）的基站（20）和基站控制器（30）被发送到移动终端（10）以接收移动通信业务。 基站（20）起到使移动终端（10）连接到基站控制器（30）的作用。 基站（20）由DCU（数字信道单元），TCU（定时/频率控制单元），射频单元和全球定位系统组成，并为用户执行各种功能。 基站控制器（30）将基站（20）连接到移动交换机（40）并控制基站之间的连接。 基站控制器（30）还处理和应用较软，较软和较硬的切换等，并执行与基站（20）和移动交换机（40）的通信的信号处理功能。 移动交换机（40）包括嵌入访问者位置寄存器。 移动交换机（40）向/从基站控制器（30），几个基站（20）和基站管理系统发送/接收信号，从而处理移动通信用户的呼叫。

公开(公告)号：KR1020030056126A

公开(公告)日：2003-07-04

申请号：KR1020010086287

申请日：2001-12-27

Applicant: 한국전자통신연구원 ,  삼성전자주식회사

Inventor： 박옥선 ,  조권도 ,  신경철

IPC: H04B1/74

CPC classification number: H04L69/322 ,  H04W28/0252

Abstract: PURPOSE: A method for transmitting upward data at a media access control layer of an asynchronous mobile communication terminal is provided to simplify a data transmission process among a PHY layer, an MAC layer, and an RLC layer. CONSTITUTION: An MAC(Media Access Channel) layer receives a MAC setup request primitive(CMAC-CONFIG-REQ) from an RRC(Radio Resource Control) layer(500). The size of data transmittable to a radio bearer corresponding to a set DCH(Data Channel) parameter is initialized as the maximum TF(Transport Format)(501). If the MAC layer receives a transmission synchronization command primitive(TRC-SYNC-CMD) from a PHY(Physical) layer, the size of data transmittable to all radio bearers corresponding to the corresponding transmission channel is set up to transmit data to an RLC(Radio Link Control) layer through an MAC status indicator(MAC-STATUS-IND)(502-504). The MAC layer sets up the size of the TF not exceeding RLC data length as the size of data transmittable to the next TTI(Transmission Time Interval) to the radio bearer received an MAC status response primitive(MAC-STATUS-RES) from the RLC layer(506). The MAC layer returns to wait TRC-SYNC-CMD(507). To the radio bearer received MAC data request primitive(MAC-DATA-REQ) from the RLC layer, an MAC header is added to configure protocol data units and selects a TFI(Transport Format Indicator) fitting to the RLC data length to send physical data request primitive(PHY-DATA-REQ) to the PHY layer(508-510). A TF not exceeding RLC buffer size is sets as the size of the data transmittable to the next TTI(511).

Abstract translation: 目的：提供一种在异步移动通信终端的媒体接入控制层向上发送数据的方法，以简化PHY层，MAC层和RLC层之间的数据传输过程。 构成：MAC（媒体接入信道）层从RRC（无线资源控制）层（500）接收MAC建立请求原语（CMAC-CONFIG-REQ）。 可传送到与设定的DCH（数据信道）参数相对应的无线承载的数据的大小被初始化为最大TF（传输格式）（501）。 如果MAC层从PHY（物理）层接收到传输同步命令原语（TRC-SYNC-CMD），则可传送到对应于相应传输信道的所有无线电承载的数据的大小被发送到RLC（ 无线链路控制）层通过MAC状态指示符（MAC-STATUS-IND）（502-504）。 MAC层建立不超过RLC数据长度的TF的大小，作为从RLC接收到的无线承载的下一个TTI（传输时间间隔）的数据的大小从RLC接收到的MAC状态响应原语（MAC-STATUS-RES） 层（506）。 MAC层返回等待TRC-SYNC-CMD（507）。 对无线电承载接收来自RLC层的MAC数据请求原语（MAC-DATA-REQ），添加MAC报头以配置协议数据单元，并选择对RLC数据长度的TFI（传输格式指示符）拟合以发送物理数据 请求原语（PHY-DATA-REQ）到PHY层（508-510）。 将不超过RLC缓冲器大小的TF设置为可传送到下一个TTI的数据的大小（511）。

公开(公告)号：KR1020030039896A

公开(公告)日：2003-05-22

申请号：KR1020010071273

申请日：2001-11-16

Applicant: 한국전자통신연구원 ,  주식회사 팬택앤큐리텔

Inventor： 김진경 ,  신경철 ,  조권도 ,  김진업

IPC: G06F15/02

Abstract: PURPOSE: A method for displaying a screen using color tones according to print grades in a mobile terminal diagnosis device is provided to recognize an importance of output print information easily by designating different color tones according to print grades in a mobile terminal diagnostic monitor. CONSTITUTION: In a method for displaying print information of a mobile terminal on a screen in a mobile terminal diagnostic monitor, print grades are set according to importance of the total print information of a mobile terminal. In addition, different color tones are designated according to the print grades, and a color tone table according to print grades is constituted. The mobile terminal diagnostic monitor checks the print grade of print information received from the mobile terminal(401). A corresponding color tone corresponded to the checked print grade is designated in the color tone table(402). Print information of the mobile terminal is displayed on a screen based on the designated color tone(403).

Abstract translation: 目的：提供一种根据移动终端诊断装置中的打印等级使用色调显示屏幕的方法，以便通过根据移动终端诊断监视器中的打印等级指定不同的色调来轻松地识别输出打印信息的重要性。 构成：在移动终端诊断监视器的屏幕上显示移动终端的打印信息的方法中，根据移动终端的总打印信息的重要性设置打印等级。 此外，根据打印等级指定不同的色调，并且构成根据打印等级的色调表。 移动终端诊断监视器检查从移动终端（401）接收的打印信息的打印等级。 在色调表（402）中指定对应于所检查的打印等级的对应色调。 移动终端的打印信息基于指定的色调显示在屏幕上（403）。

公开(公告)号：KR1019990052179A

公开(公告)日：1999-07-05

申请号：KR1019970071628

申请日：1997-12-22

Applicant: 한국전자통신연구원 ,  주식회사 케이티 ,  주식회사 엘지데이콤

Inventor： 장숙현 ,  조권도 ,  권혜연

IPC: H04W8/18 ,  H04W76/06

Abstract: 본 발명은 코드분할 다중 접속(CDMA) 방식의 무선 가입자 선로 시스템에서 사용자 식별자의 할당 및 해제, 변경하는 방법에 관한 것으로서, 무선 가입자 선로 시스템에서 사용자 식별자를 사용자가 직접 신규 및 추가로 할당받거나 해제 또는 변경할 수 있는 방법은 사용자가 가입센터에 호를 연결하여 요청하는 단계, 가입센터가 음성으로 사용자의 요구를 문의하는 단계, 사용자가 가입센터의 문의에 대해 DTMF(Dual Tone Multiplexed Frequency)톤으로 대답하는 단계, 사용자와 가입센터사이의 통신으로 생성된 사용자의 요구에 대해 가입자 센터가 사용자 식별자를 할당하거나 해제 또는 변경하는 단계로 구성함으로써, 이미 사용자 식별자를 할당받은 사용자가 더 많은 시용자 식별자를 할당받기를 원하거나 사용자 식별자를 해제 또는 변경하고자 할 때 서비스 � ��공자에게 가지 않고 각 가정에서 손쉽게 직접 행할 수 있으므로 시간적, 경제적인 효과가 있다.