Abstract:
PURPOSE: A glass composition for low temperature sintering, glass ceramics, and a manufacturing method thereof are provided to manufacture an environmentally-friendly glass composition for low temperature cofiring and glass-ceramics. CONSTITUTION: A glass composition for low temperature sintering comprises at least one of TFT LCD waste glass and calcium compounds and one or more of aluminium compounds. The TFT LCD waste glass is included 35-55 parts by weight based on 100.0 parts by weight of the TFT LCD waste glass. The aluminium compound is included 0-45 parts by weight based on 100.0 parts by weight of waste glass. The glass composition for low temperature sintering additionally includes 0-10 parts by weight of titanium oxide based on 100.0 parts by weight of the TFT LCD waste glass. The calcium compound is CaCO3, and the aluminum compound is Al2O3.
Abstract:
본 발명은 저온의 건조공기를 이용하여 건조실 내의 피건조물을 건조시키도록 구성된 저온건조 시스템에 관한 것으로서, 공기를 공급하도록 구성된 송풍기, 상기 송풍기를 통과한 공기를 냉각 및 가열하여 공기 중의 습기를 제거하도록 구부러진 형상으로 구성된 히트파이프, 상기 히트파이트 사이에 위치하고 내부에 냉매를 포함하여 냉매 증발시 외부 열을 흡수하도록 구성된 증발기, 상기 증발기와 연결되어 있으며 냉매를 이동시키는 팽창밸브, 상기 팽창밸브와 연결되어 있으며 냉매를 응축함으로써 외부에 열을 방출하도록 구성된 응축기, 상기 증발기와 연결되어 있으며 냉매를 고온, 고압으로 압축하도록 구성된 압축기, 상기 히트파이프, 증발기, 압축기, 응축기를 통과한 저온의 건조공기를 건조실로 이동시키는 블로어, 상기 블로어를 통과한 공기를 건조실로 공급하고 배출하도록 구성된 공기 공급덕트 및 공기 배출덕트를 포함하고, 상기 공기 공급덕트는 상기 공기 배출덕트보다 더 낮은 위치에 설치되고,상기 공기 공급덕트로부터 공급된 공기를 난류(turbulence) 유동하도록 건조실 하부에 대각선 방향으로 공기순환 팬이 설치된다. 히트파이프, 증발기, 응축기, 압축기, 저온건조 시스템
Abstract:
PURPOSE: An energy saving type air conditioning system for all seasons is provided to be efficiently used regardless of the season by using sensible heat and latent heat. CONSTITUTION: An energy saving type air conditioning system for all seasons comprises a heat exchanger, a dehumidifier(30), a heating coil(40), a humidifier(45), and a supply fan(50). The heat exchanger has a first heat pipe(20). The dehumidifier has a second heat pipe(31) and a cooling coil(32). The second heat pipe cools or heats external air. The cooling coil cools the external air. The heating coil heats the external air. The humidifier increases the humidity of the external air. The supply fan supplies the external air to inside.
Abstract:
본 발명은 저온 전기로에 관한 것으로, 보다 상세하게는 800 ?? 이하의 저온에서 챔버 내부에 균일한 열전달을 보장할 수 있는 전기로에 관한 것이다. 본 발명은 열처리 공간을 둘러싸는 단열벽, 상기 열처리 공간과 접하는 상기 단열벽 표면에서 상기 단열벽의 주위를 따라 주기적으로 배열되는 선형 히터 및 상기 단열벽 표면과 상기 선형 히터 표면을 덮는 열전도층을 포함하는 것을 특징으로 하는 전기로를 제공한다. 본 발명에 따르면, 챔버 내부의 온도 분포가 균일하고 공간 활용성이 높은 전기로를 제공할 수 있다. 전기로, 챔버, 세라믹 파이버 히터, 온도 균일성, 열전도층, 금속 장벽, 전도, 대류
Abstract:
PURPOSE: An air conditioning system using a heat pipe of a data center is provided to prevent outer air from directly flowing in a data center including a server room and block the inflow of an outer pollution source, thereby suppressing a damage caused by an inflow of humid air. CONSTITUTION: An air conditioning system using a heat pipe of a data center comprises a cooling room (110), a first blower (120), a heat radiation room (130), a second blower (140), a heat pipe (150), a showerhead, a cooling unit (170) and a main supply path. The cooling room includes an inlet unit which air within a data center flows in and a supply unit so that the data center is supplied with the air. The first blower provides blowing power to the data center. An inhalation hole and an air outlet unit are installed in the heat radiation room. The second blower provides blowing power to the heat radiation room. The heat pipe cools the air passing through the cooling room by an evaporator and a heat exchange process. The cooling unit has a cooling coil where cooling water is circulated and supplied. The main supply path is connected to the supply unit.
Abstract:
PURPOSE: A low-temperature drying system for power saving is provided to save energy and to reduce drying time regardless of a wet atmosphere condition by using a heat pipe and a heat pump. CONSTITUTION: A low-temperature drying system for power saving comprises a ventilator(10), heat pipes(20), an evaporator(30), an expansion valve, a condenser(60), a compressor(40), a blower, an air supply duct, and an air exhaust duct. The heat pipes cool and heat air passing through the ventilator and eliminate moisture from the air. The evaporator is located between the heat pipes and absorbs external heat. The expansion valve is connected to the evaporator and moves a refrigerant. The condenser condenses the refrigerant and emits heat. The compressor compresses the refrigerant with high-temperature and high-pressure. The blower sends dried air with low-temperature to a drying chamber. The air supply and exhaust ducts supply and exhaust the air to the drying chamber.
Abstract:
본 발명은 챔버 내부에 놓여진 물품을 가열하는 전기로에 관한 것으로, 보다 상세하게는 챔버 내부에 최소한 하나 이상의 다크 월을 구비한 전기로의 챔버 내부의 온도 분포를 보다 균일하게 유지할 수 있는 전기로 구조에 관한 것이다. 본 발명은 단열 물질을 포함하는 복수의 벽면에 의해 열처리 공간을 형성하는 챔버, 상기 복수의 벽면 중 일부 벽면에 근접하여 배치되는 저항 발열체 및 상기 복수의 벽면 중 상기 발열체에 근접하지 않는 최소한 하나 이상의 벽면에서 상기 열처리 공간에 노출되지 않은 상태로 상기 벽면의 상기 단열 물질 내에 매몰 장착되는 다크 월 히터를 포함하는 것을 특징으로 하는 전기로를 제공한다. 본 발명에 따르면, 내부 온도 분포가 균일한 챔버를 갖는 전기로를 제공할 수 있다. 전기로, 다크 월, 다크 월 히터, 온도 분포