Abstract:
본 발명은 다수개의 안테나를 이용하여 신호를 송수신하는 다중 송수신 시스템에서, 송신단에서 다수개의 안테나를 사용하여 알라모티 시공간 부호 기법을 이용하여 신호를 전송하는 경우에, 상기 신호를 수신하여 복호하는 방법 및 이를 이용한 수신 장치에 관한 것이다. 수신 장치는 전송된 신호를 수신하여 소정 심볼로 변환 처리하고, 상기 신호가 전송된 채널에 대한 채널 이득을 포함하는 채널 정보를 추정한다. 그리고 상기 추정된 채널 정보와 상기 심볼을 토대로 하여 복호를 위한 중간 처리값을 산출하고, 이를 채널 이득으로 정규화하여 상기 신호에 대한 기준 값을 산출한다. 이와 같이 산출된 기준 값이 복호를 위한 연판정 값으로 설정되어 사용된다. 한편, 경판정 값을 이용하여 복호하는 경우, 상기 기준값에 가장 가까운 성상점 값을 각각 산출하고, 이를 상기 신호의 경판정 값으로 설정하여 복호를 수행한다. 따라서 최적의 성능을 갖으면서도 연판정 값 또는 경판정 값을 산출하기 위한 탐색 과정을 수행하지 않기 때문에, 상기 방법 및 장치를 구현하기 위한 구현 복잡도를 현저하게 줄일 수 있다. 다중송수신시스템, 알라모티, 시공간 부호, 복호
Abstract:
본 발명은 하향 링크 고유빔형성 기술을 적용한 MIMO-OFDM 시스템에 관한 것이다. 고유빔형성 기술을 OFDM 시스템에 적용하는 경우, ODFM의 각 부반송파마다 서로 다른 주파수 선택적 페이딩을 겪게 되므로 각 부반송파는 서로 다른 빔형성 벡터를 사용해야 하며, 서로 다른 빔형성 벡터를 사용하기 위한 피드백량도 증가하게 된다. 본 발명은 공간 공분산 행렬이 모든 부반송파에 동일하다는 사실을 밝혀냄으로써, 고유벡터의 피드백량을 줄이고 고유빔형성 기술이 OFDM 시스템에서도 상당히 효과적인 기술임을 제시한다. 본 발명의 고유모드 생성기는 피드백 장치를 통해 장기 피드백된 개의 고유빔형성 벡터와, 단기 피드백된 각 부반송파별 최고의 고유빔형성 벡터 정보에 기초하여 각 부반송파별로 고유빔을 생성한다. MIMO, 고유빔형성, OFDM, 장기 피드백, 단기 피드백
Abstract:
본 발명은 직교 주파수 분할 다중(OFDM) 시스템에서 시변 채널에서의 채널 추정 방법에 관한 것이다. 본 발명은 시변 채널을 추정하기 위해서 프리앰블(Preamble)을 이용해 얻은 채널의 초기치를 이용한다. 이와 같이 하면, 간단하면서도 빠르게 시변 채널을 추정할 수 있으며, 시간축에서 채널을 추정함에 따라 잡음을 줄이는 효과를 볼 수 있어 추정 성능이 향상된다. OFDM, 채널 추정, 시변 채널
Abstract:
본 발명은 하향 링크 고유빔형성 기술을 적용한 MIMO-OFDM 시스템에 관한 것이다. 고유빔형성 기술을 OFDM 시스템에 적용하는 경우, ODFM의 각 부반송파마다 서로 다른 주파수 선택적 페이딩을 겪게 되므로 각 부반송파는 서로 다른 빔형성 벡터를 사용해야 하며, 서로 다른 빔형성 벡터를 사용하기 위한 피드백량도 증가하게 된다. 본 발명은 공간 공분산 행렬이 모든 부반송파에 동일하다는 사실을 밝혀냄으로써, 고유벡터의 피드백량을 줄이고 고유빔형성 기술이 OFDM 시스템에서도 상당히 효과적인 기술임을 제시한다. 본 발명의 고유모드 생성기는 피드백 장치를 통해 장기 피드백된
Abstract:
PURPOSE: A subtraction type interference removing apparatus and method having a multi-rate is provided to minimize a process delay time and easily embody a hardware when embodying a receiver applied to a CDMA(Code Division Multiple Access) channel. CONSTITUTION: The first to kth reproduction processors(721-723) perform despreading operation to each user-classified or path-classified receiving signal and reproduce signals using channel estimation values. A subtracter(731) adds each user-classified or path-classified signal reproduced in the first to kth reproduction processors(721-723) on a corresponding receiving time axis, subtracts the added signal from an input receiving signal, and generates a residual signal. The first to third despreaders(741-743) adds the residual signal generated in the subtracter(731) and each user-classified or path-classified signal, generates a signal in which an interference is removed, and performs a despreading operation. A rate detector(761) receives each user-classified or path-classified receiving signal and detects each user-classified multi-rate and an asynchronous start position point. A controller(762) controls the first to kth reproduction processors(721-723), the subtracter(731), and the first to third despreaders(741-743) using each user-classified or path-classified multi-rate and asynchronous start position point information.
Abstract:
PURPOSE: An apparatus for cancelling a partial parallel interference of a code division multiple access(CDMA) system is provided to replay an interference noise by using a temporary bit decision result only, in a present stage, to multiply a weight, and to subtract a weight-replayed interference signal from receiving signals to reduce multiple access interferences(MAIs), so as to obtain a MAI-removed signal by using the bit decision result only. CONSTITUTION: A detector comprises as follows. A real number collector(104) obtains real numbers of reverse spread signals of users 'm' having maximum signal to noise ratios(SNRs). A gain controller(105) controls sizes according to reliability of signals outputted from the real number collector(104). A bit determiner(106) inputs gain-controlled signals to determine temporary bits. A player comprises as follows. A spread code multiplier(108) multiplies a bit '1' by spread codes of the users 'm' to spread the bit '1'. A molding filter(109) controls the size of a signal outputted from the spread code multiplier(108). A channel phase multiplier(110) multiplies the output signal of the molding filter(109) by channel phases of the users 'm', to reflect phase changes by channels. Multipliers(111) multiply output signals of the channel phase multiplier(110) by signals of the detector, and output receiving signals of the users 'm'. A subtracting circuit comprises as follows. Weight multipliers(112) multiply the receiving signals by weight decided according to reliability in a corresponding stage. A first adder(113) adds all the weight-multiplied receiving signals of the users 'm'. A subtracter(114) subtracts output signals of the first adder(113) from baseband received signals. Second adders(115) add the weight-multiplied receiving signals to the output signals of the subtracter(114), and obtain multiple access interference(MAI)-removed receiving signals of the users 'm'.
Abstract:
PURPOSE: An adaptive type receiving device using a mean square error minimizing method having restrictions is provided to remarkably improve a performance of a receiving device, for which a tap coefficient in use for minimizing an MMSE is normally adopted by using an output signal of a adaptive filter. CONSTITUTION: An adaptive filter(110) filters a receiving signal and extracts a signal desired by a user through a predetermined tap coefficient. A channel estimator(120) estimates a channel by using the output signal of the adaptive filter(110) and predicts a potential component and an amplitude component of a channel of a specific user. A signal restoring unit(130) restores a signal transmitted from the specific user by using the signal filtered by the adaptive filter(110) and the channel estimated value of the channel estimator(120). A selector(140) selectively transmits an already known learning data and the output signal of the signal restoring unit(130). A multiplier(150) multiplies the signal selected by the selector(140) and the output signal of the channel estimator(120) to generate a reference signal. An adder(160) adds the reference signal transmitted from the multiplier(150) and the output signal of the adaptive filter(110), to output an error of a signal filtered by the adaptive filter(110). A tap coefficient adjusting unit(170) for varying a tap coefficient of the adaptive filter(110) according to the error computed by the adder(160).
Abstract:
본 발명은 다중사용자 다중안테나 통신 시스템에서 전처리 장치 및 전처리 방법에 관한 것이다. 다수 개의 안테나를 갖고 있는 송신단에서 하나의 안테나를 갖는 수신단으로 다수의 신호를 송신할 때, 간섭 신호에 의한 시스템의 성능 열화를 막아줄 뿐만 아니라 성상도의 회전 각도를 변화시켜가며 송신 전력을 효율적으로 줄여줄 수 있도록 하는 전처리 장치 및 그를 이용한 전처리 방법에 관한 것이다. 이와 같은 전처리 장치를 이용하여 전력을 제어하면, 기존의 다중 사용자 다중 안테나 전처리 장치의 구조적 이득을 깨트리지 않으면서도 시스템의 성능을 개선할 수 있다. 다중사용자 다중안테나, 전처리 장치, 간섭 제거, 성상도 회전, 회전 각도, 스위칭
Abstract:
본 발명은 단말에 최대의 수신 전력을 제공하는 스위치드 빔 선택 방법 및 시스템에 관한 것이다. 기지국이 사용할 수 있는 스위치드 빔의 수는 한정적이고 이들 스위치드 빔포밍을 위한 가중치 벡터의 값은 미리 정의된다. 본 발명에서, 이동 단말은 송신 안테나 구분이 가능하도록 설계된 파일롯 신호를 이용하여 송신 안테나별로 채널 값을 측정하고 측정된 채널 값과 미리 알고 있는 가중치 벡터들을 이용하여 최대의 신호 대 잡음비를 제공하는 스위치드 빔을 판단한다. 단말은 선택된 빔의 식별자를 피드백 채널을 이용하여 기지국에 통보하고 기지국은 이를 이용하여 해당 단말이 요구하는 스위치드 빔을 이용하여 트래픽을 전송한다. 스위치드 빔, 섹터 빔, 가중치 벡터, 피드백 채널