Abstract:
PURPOSE: A method for fabricating bundles of plastic optical fibers coated with optical catalyst is provided to remove efficiently coating layers of the plastic optical fibers and form bundles of plastic optical fibers without the coating layers. CONSTITUTION: A predetermined solvent is prepared to remove a coating layer of a plastic optical fiber(S10). The plastic optical fiber is dipped into the predetermined solvent(S20). A core of the plastic optical fiber is cleaned by using distilled water(S30). The core of the plastic optical fiber is coated by using an optical catalyst(S40). A dry process for the coated core is performed(S50). The above processes are repeatedly performed to form a bundle of plastic optical fibers(S60). The bundle of plastic optical fibers is formed by using a plurality of optical fibers(S70). A polishing process for end portions of the optical fibers is performed(S80).
Abstract:
광촉매는 반도체 성질의 물질로서 자신이 보유하고 있는 고유의 띠간격에너지 이상의 빛을 흡수하면 광촉매가 들뜬 상태로 여기되어 전자-정공의 전하쌍을 생성되는 활성화 상태를 거친다. 이렇게 생성된 전자와 정공은 유기물 등을 산화 또는 환원시켜 분해하는 기능을 갖게 된다. 이러한 광화학반응은 폐수처리, 휘발성유기물질(VOC)제거, 악취제거 및 살균 등에 적용하려는 시도가 활발히 진행되어 오고 있다. 이와는 별도로 건자재에 적용하여 무적(霧滴) 자정(自淨) 효과를 보려는 시도가 최근에 되어지고 있는데, 이는 광촉매 활용 시스템이 얼마나 광범위한 적용범위를 가지고 있는지를 나타내는 일례이며, 이 기술의 대중적인 인지도를 증가시키는 중요한 시발점이 되고 있다. 본 발명에서는 광촉매가 적용된 폴리머 코팅용 졸을 개발하여, 현재 무수히 많이 존재하는 옥외광고시설의 자외선(UV)에 의한 변질을 막고, 대기 오염물질에 의한 더러움을 방지하고자 하였다. 그 구성은 폴리머에의 코팅용 SiO 2 및 광촉매 졸 제조방법으로서 적용광촉매는 초미세 TiO 2 와 Fe/Ti, Mo/Ti등의 혼합광촉매이며, 폴리머에의 광촉매 코팅방법은 단일 및 이중코팅 담금법 및 분무법(dipping 및 spray 형)이고, 이를 옥외광고시설에의 적용하는 효과가 있다.
Abstract:
PURPOSE: An optical fiber and an optical chemical reactor are provided to dissolve a toxic organic compound into a harmless compound using optical energy of a lamp or solar energy and heterogeneous semiconductor photocatalysts. CONSTITUTION: A silica buffer coating (11) of an optical fiber is piled and a silica cladding(10), which is a thin film, is perfectly removed. A silica core(9) is etched using acetone and ethanol and at the same time, an optic catalyst puts into about 15wt% of solution and slurry is agitated for one day using a magnetic bar. After etching, an optical fiber bundle puts into mixing solution with optical catalyst for about 10 minutes and pull out to dry. Then, the bundle is heated at a temperature of 300°C for one hour and that process is repeated at 5 to 10 times to accomplish an intended coating amount and stability of optical catalyst.
Abstract:
PURPOSE: An aquarium not necessary water replacement and washing process, is provided which does not produce moss in the aquarium. CONSTITUTION: A material used for an inner surface of glass wall and a floor, is coated with a photocatalyst such as TiO2, Fe2O3, ZnO, TiO2/SiO2, Fe/Ti, Ni/Ti, Mo/Ti, Nb/Ti. Zeolite, glass beads, ceramics, silica and alumina are used as a supporting material in an aquarium. The moss is decomposed to carbon dioxide, water and nitrogen oxide by photocatalytic reaction with the photocatalyst and a lamp.
Abstract:
본 발명에 따른 개질 촉매는 고표면적 스피넬 구조의 담체인 yMgO-(100-y)Al 2 O 3 상에 니켈-세륨 복합체, 니켈-코발트 복합체 또는 니켈-세륨-코발트 복합체를 담지시켜 제조된 것으로, 상기 개질 촉매의 존재 및 일정 반응 조건하에서 천연가스에 대한 수증기-이산화탄소 복합개질 반응을 수행함으로써, 니켈만을 단독으로 담지한 기존의 개질 촉매에 비해 코크(탄소) 침적에 대한 저항성, 촉매 안정성 및 촉매 활성을 향상시킬 수 있다. 또한, 본 발명의 합성가스 제조 방법에 의해 제조된 합성가스는 수소 대 일산화탄소의 몰비를 조절함으로써, 피셔-트롭쉬(Fischer-Tropsch) 공정 또는 메탄올 합성 공정에 적용할 수 있다.
Abstract:
본 발명은 백금이 담지된 나노튜브구조의 티타니아를 광어노드 및 캐소드로 사용하고 쏠라셀과 멤브레인에 의해 서로 연결되며 다양한 해수전해질이 공급되는 일체형 광전기화학적 평판형 수소제조장치에 관한 것이다. 본 발명의 장치는, 금속 티타늄(Ti) 지지체의 표면에 양극산화법에 의하여 자체성장된 튜브 형태의 광촉매 티타니아(TiO 2 )와 이를 근간으로 백금(Pt)이 담지된 어노드전극 및 캐소드전극(Pt/TiO 2 )과; 상기 어노드전극이 침적되고 다양한 해수전해질이 공급되는 평판상의 어노드부와; 상기 캐소드전극이 침적되고 해수전해질이 공급되며 상기 어노드부에 일체로 중첩 결합되는 평판상의 캐소드부와; 상기 어노부와 캐소드부의 해수전해질 사이에서 이온교환이 이루어지도록 하는 멤브레인과; 상기 어노드전극 및 캐소드전극과 도선으로 연결되고, 상기 어노드부 외측 상부에서 빛에 노출되도록 형성된 쏠라셀; 및 상기 어노드부 및 캐소드부에서 생성된 가스를 포집하는 생산가스 저장 및 측정부를 포함하여 구성된다.
Abstract:
본 발명은 다양한 이온 성분을 갖는 자연 해수 또는 해수 전해질 분리/농축장치에 의해 농축된 해수를 전해질로 이용하는 광전기화학적 수소제조장치와 수소제조방법을 제공한다. 본 발명은 금속 티타늄 지지체의 표면에 광촉매 티타니아(TiO 2 )가 양극산화에 의해 튜브형으로 적층되고 빛에 노출되도록 형성된 티타니아 광애노드와, 해수 전해질을 수용하며 티타니아 광애노드가 침지되는 애노드 전해질부와, 백금 소재로 이루어져 수소를 발생시킬 수 있게 되는 캐소드와, 해수 전해질을 수용하며 캐소드가 침지되는 캐소드 전해질부와, 애노드 전해질부와 캐소드 전해질부 사이에 개재되어 애노드 전해질부와 캐소드 전해질부 사이에 이온 교환이 이루어질 수 있게 하는 나노여과 멤브레인과, 티타니아 광애노드와 캐소드에 도선으로 연결되며 빛에 노출되도록 형성된 솔라셀에 의해 수소를 제조한다.
Abstract:
PURPOSE: An apparatus for separating/concentrating seawater electrolyte, an apparatus for photo-electrochemically manufacturing hydrogen based on the seawater electrolyte, and a method for manufacturing hydrogen are provided to maximize the manufacturing efficiency of hydrogen using seawater resources. CONSTITUTION: An apparatus for separating/concentrating seawater electrolyte includes a seawater storing part(10), a membrane cell(20), a seawater supplying part(30), a separated seawater discharging part(40), and a concentrated seawater discharging part(50). The seawater storing part stores seawater after particulate materials are eliminated from natural seawater. Nanofiltration membrane is arranged in the membrane cell, and the membrane cell separates/concentrates ionic components in the seawater. The separated seawater discharging part discharges separated seawater. The total dissolved solids(TDS) concentration of the separated seawater is lower than the TDS concentration of the natural seawater. The concentrated seawater is discharged to the seawater storing part.
Abstract:
본 발명은 광감응으로 전하쌍을 생성하는 광촉매와 양성자를 수소로 환원하는 엔자임을 각각 어노드와 캐소드에 고정한 상태로 쏠라셀과 나노여과멤브레인에 의해 서로 연결되며 실제로 사용이 가능하도록 평판형으로 제작한 수소제조장치에 관한 것이다. 더욱 자세하게는 금속 티타늄(Ti) 지지체의 표면에 광촉매 티타니아(TiO 2 )를 양극산화를 통하여 튜브형으로 적층시키고, 빛에 노출되도록 형성된 티타니아 광어노드와; 상기 티타니아 광어노드가 침적되는 어노드 전해액과; 상기 티타니아 광어노드 재질에 양성자를 수소로 환원하는 엔자임이 고정화되고, 빛에 노출되지 않도록 형성된 캐소드와; 상기 캐소드가 침적되는 캐소드 전해액과; 상기 어노드 전해액과 캐소드 전해액을 연결하는 나노여과멤브레인과; 상기 티타니아 광어노드와 상기 캐소드와 도선으로 연결되고, 빛에 노출되도록 형성된 쏠라셀로 구성되는 것을 특징으로 하는 평판형 수소제조장치에 관한 것이다. 수소 제조, 물분해, 광어노드, 엔자임, 쏠라셀, 나노여과멤브레인