Abstract:
인체를 통신 선로로 하여 음향 신호를 전송하는 음향 송신 시스템이 제공된다. 음향 송신 시스템은 인체와 직접 접촉된 두 개의 음향 송신 장치를 포함하며, 각각의 음향 송신 장치는 인체를 통하여 전송될 가청 주파수 대역의 음향 신호와 생성된 음향 신호와 함께 전송되는 적어도 가청 주파수 대역보다 높은 주파수를 갖는 고주파 신호를 생성한다. 각각의 음향 송신 장치는 생성된 상기 음향 신호와 상기 고주파 신호를 합성하여, 합성된 신호의 출력 위상을 조절하여 인체를 통하여 전송한다. 두 개의 음향 송신 장치에서 인체로 출력된 합성 신호의 간섭에 의하여 사람은 고주파 신호가 제거된 음향 신호를 들을 수 있다. 음파, 간섭, 수신
Abstract:
A terrestrial DMB(Digital Multimedia Broadcasting) receiving apparatus and a method thereof are provided to conveniently carry a DMB receiver and improve the receiving characteristic of the DMB receiver by using the body of a user as an antenna. A terrestrial DMB receiver(410) using a human body antenna includes an electrode(420), a low-frequency amplifier, and an impedance matching circuit. The electrode comes into contact with the human body(400). The low-frequency amplifier receives the current flowing through the human body, which corresponds to a DMB broadcasting signal transmitted through a terrestrial repeater, through the electrode and amplifies the received current. The impedance matching circuit is located between the electrode and the low-frequency amplifier and matches the impedance of the human body to the impedance of the low-frequency amplifier.
Abstract:
본 발명에 의한 무선랜 MAC 시스템에 있어서의 폴링 기반 고속 MAC 송수신 방법은 적어도 하나 이상의 수신버퍼와 상기 수신버퍼에 일대일로 대응하며 그 상태를 나타내는 적어도 하나 이상의 수신 레지스터, 그리고 적어도 하나 이상의 송신버퍼와 상기 송신버퍼에 일대일로 대응하며 그 상태를 나타내는 적어도 하나 이상의 송신 레지스터를 포함하는 MAC 송수신 장치에서 무선단말기와 데이터 프레임을 송수신하는 방법에 있어서, 상기 송신버퍼와 수신버퍼를 최종 폴링하는 시점부터 소정의 지속시간을 가지는 타이머를 구동한 후 타이머의 구동시간의 완료여부를 확인하는 단계; 타이머의 구동시간이 만료되었으면, 상기 송신 레지스터와 수신 레지스터를 폴링하여 각 상태에 따라 재전송 혹은 수신프레임의 독출을 수행하는 단계; 및 타이머의 구동시간이 만료되지 않고 송신 데이터 프레임이 발생하면 상기 버퍼에 저장한 후 상기 송신레지스터와 수신레지스터를 폴링하여 재전송 혹은 수신프레임의 독출을 수행하는 단계;를 포함하는 것을 특징으로 하며, 폴링 방식으로만 데이터를 전달하여 기존의 인터럽트를 이용한 방식에 비해 CPU의 로드를 현저히 줄여줌으로써 MAC에서의 송수신 성능을 향상시켜주고 시스템의 안정화에 기여할 수 있다.
Abstract:
인체를 통신 선로로 하여 음향 신호를 전송하는 음향 송신 시스템이 제공된다. 음향 송신 시스템은 인체와 직접 접촉된 두 개의 음향 송신 장치를 포함하며, 각각의 음향 송신 장치는 인체를 통하여 전송될 가청 주파수 대역의 음향 신호와 생성된 음향 신호와 함께 전송되는 적어도 가청 주파수 대역보다 높은 주파수를 갖는 고주파 신호를 생성한다. 각각의 음향 송신 장치는 생성된 상기 음향 신호와 상기 고주파 신호를 합성하여, 합성된 신호의 출력 위상을 조절하여 인체를 통하여 전송한다. 두 개의 음향 송신 장치에서 인체로 출력된 합성 신호의 간섭에 의하여 사람은 고주파 신호가 제거된 음향 신호를 들을 수 있다. 음파, 간섭, 수신
Abstract:
본 발명은 인체를 매질로 하는 통신 장치, 이를 이용하는 인체 통신 시스템 및 그 방법에 관한 것이다. 본 발명에 따르면, 인체에 직접 접촉된 통신 장치가 전송하고자 하는 데이터 신호가 포함된 미세 전류를 인체에 흘려보냄으로써 인체를 매질로 하는 통신이 이루어진다. 또한, 다수의 통신 장치가 인체에 접촉되어 네트워크를 구성하고, 상기 다수의 통신 장치 중 하나의 통신 장치-마스터 멤버-가 그 외의 통신 장치-슬레이브 멤버-에게 정보를 요청하는 메시지를 전극을 통하여 브로드캐스트하고, 이에 대한 응답 메시지를 전송한 슬레이브 멤버들에 대한 멤버 테이블을 구성하여 네트워크 내의 데이터 통신을 제어한다. 마스터 멤버는 주기적으로 메시지를 브로드캐스팅하여 새로운 네트워크 참여자를 실시간으로 관리한다. 기저 대역 신호, 인체 매질, 마스터 멤버(master member), 슬레이브 멤버(slave member)
Abstract:
본 발명은 진동/무음 모드 상태에서 자동으로 벨소리 모드를 변경하는 휴대전화 단말기의 진동/무음 모드 해제 장치 그 방법에 관한 것이다. 사용자로부터 진동/무음 모드를 해제하는 환경 조건인 기준 회수 및 기준 시간을 설정 받아 저장한다. 현재 착신되는 호에 대해 이전에 저장된 발신자 정보를 이용하여 최종 발신자 정보를 계산하여, 상기 저장된 기준 회수 및 기준 시간과 비교하여 진동/무음 모드 해제 여부를 판단한다. 최종 발신자 정보(즉, 동일 발신 전화번호의 착신 회수 및 현재 착신 호를 통해 계산된 시간)와 상기 환경 조건(저장된 기준 회수 및 기준 시간)을 비교하여 초과하는 경우에는 진동/무음 모드를 해제한다. 이와 같이 사용자가 설정한 환경 조건을 만족하는 경우 자동으로 진동/무음 모드를 해제함으로써, 사용자가 휴대전화 단말기의 진동/무음 모드로 인해 수신하지 못하는 상태를 방지할 수 있다.
Abstract:
PURPOSE: A method for controlling the output of print information used in debugging software of a mobile terminal is provided to allow a user to select tasks or blocks to be outputted at necessary point of time in real time by using identifiers of the tasks or the blocks, and to assign mutually different print output grades to each task or block identifier, so as to output only requested information. CONSTITUTION: A mobile terminal stores print control information received from a diagnostic monitor to update prior print control information(52). The mobile terminal decides whether a task or a block of the mobile terminal itself is included to be outputted through the stored print control information by using a task or a block identifier(53). If so, the mobile terminal checks whether a print grade of the mobile terminal itself enables output(54). If so, the mobile terminal transmits print information to the diagnostic monitor(55). If a task or a block of the mobile terminal itself is not included in the step 53, or if the print grade of the mobile terminal itself does not enable output in the step 54, a routine is ended.
Abstract:
현재, 여러 형태의 이동통신 서비스가 제공되고 있는 상황에서 수년내에 새로운 이동통신시스템인 제3세대 이동통신 시스템(IMT-2000: International Mobile Telecommunication-2000)이 출현할 전망이므로, 기존 시스템의 인프러 시설을 재활용할 수 있는 방법이 매우 중요한 문제로 부각되고 있다. 본 발명은 여러 이동통신 시스템간의 호환을 위해 제어국 장치에 프로토콜 변환장치를 갖게 하므로써 무선액세스망과 코아망간 기존 인프러 시설의 재활용을 가능케 하는 방법에 관한 것이다.
Abstract:
PURPOSE: A slot alignment/slot size changing method is provided, having the slot allotted by transmitting even the requesting data of the slot required when transmitting the first one of the packet data distributed while transmitting the packet data into a slot unit if the packet is big. CONSTITUTION: The packet data transmitting method at a mobile terminal comprises the steps of: confirming whether the packet data to transmit is over the amount of the slot; transmitting the packet data to the base station through the competing channel consisted of the slot in a certain size if the packet data is not over the amount of the slot; transmitting the remaining division packet data to the base station through the competing channel of the slot distributed by transmitting the divided packet data and the slot demanding data to the base station through the competing channel.
Abstract:
본 발명은 코드 분할 다중 접속(CDMA) 이동통신 시스템에서의 전용 채널을 할당받기 위한 단말국의 기지국 접속 방법에 관한 것이다. 종래에는 접속 메시지를 송출에 필요한 송출 전력으로 인한 접속 채널의 간섭 문제를 최소화하기 위해 최기에 가능한 한 최소 전력으로 접속 메시지를 송출하고 기지국으로 부터 응답을 받지 못하는 경우마다 송출 전력을 증가시켜 접속 메시지를 재송출하는 방법을 사용하였다. 이 경우 기지국으로 부터 응답을 받지 못할 때마다 송출 전력을 증가시키므로 인해 자원이 낭비되는 문제점이 있었다. 이를 해결하기 위해 기지국으로부터 응답을 받지 못하는 이유를 충돌에 의한 것인지 또는 낮은 송출 전력에 의한 것인지 단순화시키고, 이에 따라 해당 원인별로 처리 방법을 달리하므로써 자원의 낭비 및 간섭의 영향을 최소화 할 수 있는 코드 분할 다중 접속 이동통신 시스템에서 단말국의 기지국 접속 방법이 제시된다.