Abstract:
An apparatus and a method for retransmission request in a wireless communication system using a relay are provided to improve the reliability of data received by a receiver, by enabling a relay station to relay data without error to the receiver. According to a method for retransmission request of a relay station(210) in a wireless communication system using a relay, data received from a transmitter are transmitted to a receiver. If a retransmission request message is received from a base station(200), corresponding data are retransmitted to the receiver. In case of forward transmission, the transmitter means the base station and the receiver means a terminal(220). In case of reverse transmission, the transmitter means the terminal and the receiver means the base station.
Abstract:
A retransmission apparatus and a method thereof in a wireless relay communication system are provided to transmit an ARQ(Automatic Retransmission reQuest) feedback message more efficiently, by generating all retransmission request messages for terminals received in the present uplink section as one message. According to a retransmission method of a relay station in a wireless communication system, data is received from a transmitter and the received data is transmitted to more than one receiver. ACK/NACK information of the data are received from the receiver, and the received ACK/NACK information are transmitted to a base station.
Abstract:
An apparatus and a method for supporting optimized network reentry procedures in a multi-hop relay BWA(Broadband Wireless Access) communication system are provided to execute optimized network reentry procedures between an RS(Relay Station) and an MS(Mobile Station) by defining the signaling between the RS and a BS(Base Station) in providing MS information to the RS when the MS executes handover. An RS receives an HO(HandOver)-notify message, which indicates the handover of an MS, from a BS(711). The RS executes optimized network reentry procedures with the MS by using information contained in the received HO-notify message(713). While executing the optimized network reentry procedures, the RS judges whether additional MS information is necessary in executing the optimized network reentry procedures(715). If it is judged that additional MS information is necessary, the RS transmits an MS information request message to the BS in order to request additional MS information(717). Then, the RS confirms whether an MS information response message is received from the BS(719).
Abstract:
본 발명은 통신 시스템에서, 서빙 기지국이 이동 가입자 단말기가 핸드오버를 수행해야함을 결정하면, 타겟 기지국들중 어느 한 타겟 기지국으로 상기 이동 가입자 단말기가 핸드오버를 수행할 것임을 통보하고, 상기 이동 가입자 단말기로 상기 통보된 타겟 기지국으로 강제적으로 핸드오버를 수행해야함을 나타내는 정보를 포함하는 핸드오버 메시지를 송신함을 특징으로 한다. 광대역 무선 접속 통신 시스템, 핸드오버, 강제 핸드오버, 핸드오버 취소, 핸드오버 거절
Abstract:
An apparatus and a method for reporting an MS(Mobile Station)-RS(Relay Station) channel state to provide a transparent relay service to a mobile station in a multi-hop relay BWA(Broadband Wireless Access) communication system are provided to reduce the quantity of channel state information report messages to be reported to a BS(Base Station) by an RS and the overheads of an uplink band to be allocated for the transmission of the channel state information report messages by setting up a terminal signal level threshold and providing it to the RS. An RS receives the information associated with an MS's sounding operation, such as "PAPR_Reduction_Safety_and_Sounding_Zone_Allocation_IE" and "UL_Sounding_Command_IE", from a BS(511). Also the RS receives signal level threshold information from the BS through an RS control information message(513). Afterwards, the RS monitors a sounding signal, which is transmitted from an MS at a sounding zone, and measures the signal level value of the MS(515). The RS compares the measured signal level with the signal level threshold(517). In case the measured signal level is better than the signal level threshold, the RS reports the signal level information of the MS to the BS(519). However, if the measured signal level is not better than the signal level threshold, the RS doesn't report the signal level information of the MS to the BS(521).
Abstract:
A method and an apparatus for managing CIDs(Connection IDentifiers) in a multi-hop relay BWA(Broadband Wireless Access) communication system are provided to reduce the contents of management messages, save bandwidths, and achieve efficient communication by separately managing the data which will be transmitted to a relay station from the data which will be relayed to mobile stations in case a base station performs communication with a plurality of mobile stations through the relay station. A base station assembles each data to be transmitted to the downlink and forms the first packet(601). Then, the base station confirms the CIDs of each mobile station which will receive data(602), and checks locations of each mobile station(603). In case a mobile station is connected to a relay station(604), the base station confirms the relay station and judges whether the second packet to be transmitted to the relay station exists(605). Also, the base station confirms repeatedly whether an additional packet to be transmitted exists(606). In case the second packet and the additional packet exist, the base station combines them into a payload(607). The base station assembles a new header with the payload by using the relay CID of the relay station and transmits it to the relay station(609).
Abstract:
본 발명은 송신할 데이터가 존재하지 않는 슬립 모드와, 송신할 데이터가 존재하는 어웨이크 모드를 가지며, 상기 슬립 모드는 데이터 수신이 불가능한 슬립 구간과, 데이터 수신이 가능한 청취 구간을 가지는 광대역 무선 접속 통신 시스템에서, 기지국은 상기 슬립 모드에 존재하는 이동 가입자 단말기가 상기 슬립 구간의 특정 시점에서 주기적 레인징을 수행해야함을 검출하면, 상기 슬립 구간 이전의 청취 구간에서 상기 이동 가입자 단말기로 상기 슬립 구간에서 상기 주기적 레인징을 수행해야함을 통보하고, 상기 이동 가입자 단말기는 상기 청취 구간에서 상기 통보를 받은 후 상기 슬립 모드에서 상기 어웨이크 모드로 천이하여 상기 특정 시점에서 상기 주기적 레인징을 수행함으로써 슬립 모드에서 주기적 레인징을 가능하게 한다. 주기적 레인징, 트래픽 지시 메시지, 슬립 식별자 비트 페어, 슬립 모드, 어웨이크 모드
Abstract:
A relay station selection method in a communication system using a multi-hop relay scheme and a system therefor are provided to enable a base station to transmit relay station information to a mobile station, so that the mobile station performs multi-hop relay communication with the base station through a relay station having a good channel state. A mobile station(350) receives relay station information capable of increasing system capacity from a serving base station(300)(302-306). The mobile station(350) measures reference signal strength of a relay station clearly stated in the relay station information(308). The mobile station(350) determines a relay station whose measured reference signal strength satisfies a preset condition as a relay station for relaying a signal(310).
Abstract:
본 발명은 다중 홉 릴레이 방식을 사용하는 셀룰라 통신시스템에서 이동성을 갖는 중계국의 핸드오버를 처리하기 위한 장치 및 방법에 관한 것이다. 본 발명에 따른 핸드오버 처리 방법은, 핸드오버가 필요한 경우, 상기 이동 중계국이, 하위 노드 정보를 포함하는 핸드오버 요청 메시지를 서빙 기지국으로 전송하는 과정과, 상기 핸드오버 요청 메시지 수신시, 상기 서빙 기지국이, 상기 이동 중계국이 핸드오버할수 있는 인접 노드들로부터 핸드오버 관련 정보를 수집하여 인접 노드 리스트를 구성하는 과정과, 상기 서빙 기지국이, 상기 인접 노드 리스트를 포함하는 핸드오버 응답 메시지를 상기 이동 중계국으로 전송하는 과정과, 상기 이동 중계국이, 상기 핸드오버 응답 메시지에 포함된 정보에 근거해서 핸드오버 타겟 노드를 결정하고, 상기 타겟 노드를 포함하는 핸드오버 지시 메시지를 상기 서빙 기지국으로 전송하는 과정을 포함한다. 이와 같은 본 발명은 상기 다중 홉 릴레이 시스템에서 이동성을 갖는 중계국의 핸드오버 방안을 제안함으로써, 상기 이동 중계국과 상기 이동 중계국의 서비스 영역에 포함되어 있는 하위 노드에게 통신 지속성을 보장할 수 있는 이점이 있다 릴레이 통신 시스템, 핸드오버, 이동 중계국
Abstract:
본 발명은 다중 홉 릴레이 방식을 사용하는 광대역 무선 접속 통신 시스템에서 단말의 요청에 의한 단말 핸드오버 지원 장치 및 방법에 관한 것으로서, 인접 기지국들 및 인접 중계국들에 대한 신호 세기를 측정하여 핸드오버가 요구되는지 여부를 판단하는 과정과, 상기 핸드오버가 요구될 시, 서빙국으로 상기 단말이 추천하는 타겟 인접 노드 리스트 정보를 포함하는 핸드오버 요청 메시지를 전송하는 과정과, 상기 서빙국으로부터 상기 서빙국이 추천하는 타겟 인접 노드 리스트 정보를 포함하는 핸드오버 응답 메시지를 수신하는 과정을 포함하여, 상기 단말이 핸드오버할 타겟 노드를 선택하고 상기 타겟 노드를 통한 상기 단말의 데이터 송/수신을 지속적으로 수행할 수 있고, 타겟 노드가 될 수 있는 인접 노드에 대한 처리를 중계국에서 담당하는 방안을 제안함으로써 핸드오버 제어 메시지 송/수신에서 발생할 수 있는 지연을 줄일 수 있는 이점이 있다. 릴레이 통신 시스템, 핸드오버, 단말 요청