Abstract:
본 발명은 감소 슬롯 사이클 모드를 지원하고, 대기 상태나 시스템 액세스 갱신 오버헤드 정보 부상태에 있을 때 페이지 메시지를 수신할 수 있는 단말의 슬롯 사이클 인덱스 변경 방법에 있어서, 단말이 대기 상태 또는 시스템 액세스 갱신 오버헤드 정보 부상태에서 기지국으로부터 단말의 변경 정보를 포함한 페이지 메세지를 수신하는 제 1 단계와, 단말이 상기 페이지 메시지로부터 최대 감소 슬롯 사이클 타이머값과 기지국이 요구하는 감소 슬롯 사이클 인덱스값을 독출하는 제 2 단계와, 단말이 상기 감소 슬롯 사이클 인덱스 값과 단말 내부의 슬롯 사이클 인덱스의 저장값을 비교해서 작은 값으로 슬롯 사이클 인덱스의 저장값을 업데이트하는 제 3 단계와, 단말은 감소 슬롯 사이클 타이머값의 최대값 보다 같거나 작은 값으로 타이머값을 설정하 고, 슬롯 사이클 인덱스의 저장값보다 같거나 작은 슬롯 사이클 인덱스의 값을 사용하여 감소 슬롯 모드로 동작하는 제 4 단계를 포함하여 구성됨을 특징으로 한다. 슬롯 사이클 인덱스, PTT
Abstract:
PURPOSE: A method for a measurement report in a wireless communication network and an apparatus thereof are provided to suppress the ping-pong phenomenon by avoiding the unnecessary handover between the frequencies. CONSTITUTION: A measuring unit(411) measures a neighboring base center. A measurement control part(421) controls the measuring unit in order to measure a PCI(Physical Cell ID) of all cells including CSG(Closed Subscriber Group) cells and macro cells when measuring the handover between the frequencies. If the valid cell having the measured value satisfying the measurement report condition exists, a message processor(431) confirms the PCI range information used for CSG cells as exclusive. If the range information exists, the measurement report message is generated.
Abstract:
본 발명은 기지국과 단말간의 세션 설정/갱신/삭제 시 반복되는 협상 절차를 간소화할 수 있는 기지국과 단말간의 세션 협상 방법 및 장치와 그 시스템에 대한 것으로서, 본 발명에서 기지국은 단말과 세션 설정을 위한 프로토콜별 협상을 진행한 후, 다른 세션 설정의 추가 여부를 나타내는 세션 설정 계속 비트가 포함된 연성 설정 완료 메시지를 상기 단말로 전송한다. 그리고 기지국과 단말은 각각 상기 연성 설정 완료 메시지의 해당 세션 설정을 식별하는 소정 특성 식별자를 저장한다. 이후 모든 세션 설정이 완료된 경우 기지국과 단말은 사용중인 세션 설정의 변경 여부를 확인하여 상기 사용중인 세션 설정이 변경되지 않는 경우 물리 채널을 유지함을 특징으로 한다. 또한 본 발명은 단말과 기지국간의 세션 설정 협상이 완료된 후, 기지국이 특정 세션 설정의 적용 여부를 단말에 지시함을 특징으로 한다. 고속 패킷 데이터 시스템, 세션, 설정, 갱신, 삭제, 트래픽 채널, 물리 채널, 협상
Abstract:
A method and an apparatus for transmitting ACK/NACK information in orthogonal frequency division multiplexing access systems based on time-division duplexing are provided to minimize the electrical transmission restriction as to the information transfer except the ACK/NACK information. The scheduling information is generated and the TDD(Time Division Duplexing) ratio value is decided. In case the remaining value is not zero by dividing the FL (Forward Link) time slots into the number of RL (Reverse Link) time slot, the number of TDD ratio value produces the group index information by grouping the mobile terminals into a plurality of groups. The TDD ratio value and group index information are transmitted to the mobile terminal. The TDD ratio value comprises the ratio of the number of the time slot allocated to each link according to the amount of data transmitted to FL and RL for the fixed time interval.
Abstract:
A method and an apparatus for managing active set in s mobile communication system are provided to allocate radio resource to the mobile terminal effectively by using a pilot report, which determines whether to allocate radio resource, of the mobile terminal. The reception strength of a pilot channel, which determines whether to allocate radio resource, of a mobile terminal is measured(201). It is determined that the number of active sets, maniging the mobile terminal, is greater than or equal to the predetermined number of active sets(204). It is determined whether to transmit the pilot to the base station according to the result of the inspection. The trnasmission of the pilot is performed through a pilot report.
Abstract:
A handoff method between different networks and a system thereof are provided to reduce a handoff time while preventing service interruption during the handoff process. A dual AT(Access Terminal) receives a neighbor list including a pilot PN(Pseudo-Noise) from a BS(Base Station)-WiMax(Worldwide interoperability for Microwave Access)(203) and transmits a handoff request message including the pilot PN to the BS-WiMax(205). When the handoff request message is transmitted from the BS-WiMax to an ASN(Access Service Network)-WiMax(207), a session negotiation process is performed between the terminal and the ASN-WiMax(209). The ASN-WiMax obtains a PDSN(Packet Data Service Node)-A address from the pilot PN(211) and transmits a handoff request to the PDSN-A by using the PDSN address(213). When the BS-WiMAX transmits a response with respect to the handoff to the dual AT(245), the dual AT transmits an indication via a handoff indication message to the BS-WiMax(247).
Abstract:
본 발명은 무선 이동통신 시스템에서 공통의 무선자원을 이용해 방송 서비스를 제공하는 방법에 관한 것이다. 본 발명에서 제공하는 복수의 셀들로 구성되는 이동통신 시스템에서 단말이 상기 복수의 셀들 간을 이동하면서 방송 서비스를 수신하는 방법은, 상기 복수의 셀들 중 하나인 소스 셀에서 방송 프로그램을 수신하고 있는 단말이 타겟 셀로 이동할 경우 상기 타겟 셀이 속한 방송영역을 나타내는 방송영역 식별정보를 수신하는 과정과, 상기 방송영역 식별정보에 따라 이전 방송영역을 이탈하였는지를 검출하는 과정을 포함함을 특징으로 하는 방송 서비스를 수신하는 방법을 포함한다. 방송 서비스, 방송영역 식별자, DL-MAP
Abstract:
A service method and system of a mobile node supporting a mobile IP in a mobile communication system using a PMIP(Proxy Mobile Internet Protocol) are provided to reduce a handoff delay in a mobile communication environment and effectively support an existing mobile IP mobile node according to a PMIP. An HA(Home Address)(HoAv4) in compliance with an IPv4, which corresponds to an HA(HoAv6) in compliance with an IPv6 of a mobile node, and a care of address(CoAv4) in compliance with the IPv4 are defined to manage handoff of the mobile node. The mobile node is registered in a visitor list and managed by using the HoAv6 of the mobile node or an NAI(Network Access Identifier) of the mobile node as a key value. The mobile node is registered according to an PMIP in the HA by including the HoAv4 and the CoAv4. An RA(Router Advertisement) is transmitted to the mobile node to allow registration of the mobile node to be requested.
Abstract:
A method for providing a system configuration change time in a mobile communication system and an apparatus thereof are provided to reduce the power consumption of a terminal by making the terminal in a sleep state check the time when system configuration information is changed and update the system configuration information. A method for providing a system configuration change time in a mobile communication system comprises following several steps. A BS(Base Station) checks whether a current slot transmits a quick page slot(300). The BS, which determines to transmit the quick page slot, calculates the time having passed after system configuration information is finally changed(302). The BS selects a CCI(Configuration Change Indicator) value matched with the calculated time, and configures a quick page channel including the CCI(304). The BS transmits the configured quick page channel and terminates operation of the current slot(306).
Abstract:
An apparatus and a method for feeding back a CQI(Channel Quality Indicator) in a mobile communication system are provided to control uplink radio resources for CQI feedback effectively and to feed back CQI information selectively to increase system capacity. A base station for receiving CQI feedback information from a mobile terminal comprises an RoT(Rise over Thermal) measurement part(500), an RF part(502), and a control part(504). The RoT measurement part measures an RoT value to measure the power control and interference of the mobile terminal. The RF part receives a CQI from the mobile terminal, and transmits a TPR(Traffic to Pilot Ratio) command to the mobile terminal in order to control the CQI feedback of the mobile terminal. The control part compares the measured RoT value with a preset threshold, transmits the TPR command, and executes AMC(Adaptive Modulation and Coding) and channel sensitive scheduling on the basis of the received CQI.
Abstract translation:提供了一种用于在移动通信系统中反馈CQI(信道质量指示符)的装置和方法,用于有效地控制用于CQI反馈的上行链路无线电资源并有选择地反馈CQI信息以增加系统容量。 用于从移动终端接收CQI反馈信息的基站包括RoT(上升温度)测量部分(500),RF部分(502)和控制部分(504)。 RoT测量部分测量RoT值以测量移动终端的功率控制和干扰。 RF部从移动终端接收CQI,向移动终端发送TPR(Traffic to Pilot Ratio,业务转发导频)命令,以控制移动终端的CQI反馈。 控制部分将测量的RoT值与预设阈值进行比较,发送TPR命令,并根据接收到的CQI执行AMC(自适应调制和编码)和信道敏感调度。