Abstract:
A system and a method for transmitting and receiving a signal in a mobile communication system are provided to prevent limit for a data rate by transmitting and receiving a signal as a full duplex mode. A system for transmitting and receiving a signal in a mobile communication system includes a first antenna set, a second antenna set, and a relay station. The first antenna set has at least one antenna for transmitting and receiving the signal to and from a base station. The second antenna set has at least one antenna for transmitting and receiving the signal to and from at least one mobile station. The relay station selects at least one antenna from the second antenna set for maximizing an increase of a transfer capacitance in the mobile station, and transmits and receives the signal to and from the mobile station using the selected antenna. The relay station transmits a second downlink frame(220) to the mobile station at the same time slot as the time slot to receive a first downlink frame(210) from the base station to the relay station. The mobile station transmits a second uplink frame(240) to the base station at the same time slot as the time slot to receive a fist uplink frame(230) from the relay station.
Abstract:
본 발명은 통신 시스템에 관한 것으로서, 특히 멀티캐스트 방송 서비스(MBS: Multicast and Broadcast Service)를 제공하는 통신 시스템에서 데이터 송수신 방법에 관한 것이다. 이를 위해 본 발명은, 통신 시스템에서 데이터 송신 방법에 있어서, 수신기로 송신할 송신 데이터가 생성하고, 상기 생성한 송신 데이터를 프레임에 할당하고, 상기 할당한 프레임에 대한 프레임 오프셋 정보를 포함하는 맵(MAP) 메시지를 설정하고, 상기 설정한 맵 메시지를 상기 수신기로 전송한다. 멀티캐스트 방송 서비스, MBS-MAP 메시지, MBS 데이터 정보 엘리먼트, MBS 데이터 시간 다이버시티 정보 엘리먼트, MBS 버스트 프레임 오프셋
Abstract:
본 발명은 광대역 무선 접속 통신 시스템에서, 상기 다운링크 채널 정보가 변경됨을 검출한 후 상기 기지국으로부터 수신할 데이터가 존재함을 통보받은 후 상기 다운링크 채널 정보 변경을 상기 기지국으로 보고하여 상기 이동 가입자 단말기와 상기 기지국간의 다운링크 채널 정보를 일치시키도록 제어한다. 슬립 모드, DCD 메시지 변경, DCD count, 다운링크 버스트 프로파일 변경, DIUC, PHY channel report header 메시지(제1타입 MAC 헤더 메시지), Bandwidth Request and Downlink Burst Profile Change Request Header 메시지(제2타입 MAC 헤더 메시지, 제3타입 MAC 헤더 메시지)
Abstract:
A device for supplying a transparent relay service to an MS(Mobile Station) in a broadband wireless access communication system using a multi-hop relay scheme and a method therefor are provided to enable an RS(Relay Station) to recognize a sounding signal transmitted from the MS which directly communicates with a BS(Base Station) and to measure a channel state between the RS and the MS to report the state to the BS, so that the BS can select an RS suited to the MS. A BS(410) broadcasts a message for allocating a sounding channel to an MS(440)(411). The BS(410) measures a signaling level between the BS(410) and the MS(440) by using a sounding signal of the MS(440) received through the allocated sounding channel(413-419). The BS(410) receives a report on signaling level measurement values between an RS(450) and the MS(440) measured by using the sounding signal, from at least one RS(450)(421). The BS(410) selects an RS(450) suited to the MS(440) by using the signaling level measurement values between the RS(450) and the MS(440) and a signaling level measurement value between the BS(410) and the MS(440)(423).
Abstract:
본 발명은 다중 홉 릴레이 방식을 사용하는 광대역 무선 통신 시스템에서 인접 노드 정보 제공 장치 및 방법에 관한 것이다. 본 발명에 따른 다중 홉 릴레이 방식을 사용하는 광대역 무선접속 통신시스템에서 인접 노드 광고 메시지를 통신하기 위한 장치는, 복수의 네이버(NEIGHBOR) 정보들을 포함하며, 상기 네이버 정보들 각각이 인접 기지국 정보와 TLV(Type/Length/Value) 형태의 인접 중계국 정보를 포함하는 인접 노드 광고 메시지를 생성하여 브로드캐스트하는 기지국과, 상기 인접 노드 광고 메시지 수신시, 상기 인접 노드 광고 메시지에 포함된 인접 기지국 정보 및 인접 중계국 정보를 구분하여 처리하는 노드를 포함하는 것을 특징으로 한다. 이와 같이, 본 발명은 인접 기지국 정보 및 인접 중계국 정보를 포함하는 인접 노드 광고 메시지를 브로드캐스트하는 경우, 각 노드가 자신에게 필요한 인접 노드 정보를 효율적으로 추출하여 처리할수 있는 이점이 있다. 릴레이 통신 시스템, 광대역 무선접속 통신 시스템, 중계국 정보 인지, 인접 노드 광고
Abstract:
본 발명은 정보 비트들을 포함하는 정보 파트와, 패리티 비트들을 포함하는 패리티 파트를 포함하는 반복 축적(RA: Repeat Accumulate) 타입(type)-저밀도 패리티 검사(LDPC: Low Density Parity Check)(RT-LDPC) 부호를 사용하는 통신 시스템에서, 복호할 RT-LDPC 부호어가 천공 방식이 적용되지 않은 일반 RT-LDPC 부호어인지 혹은 상기 천공 방식이 적용된 천공된 RT-LDPC 부호어인지 검사하고, 상기 복호할 RT-LDPC 부호어가 천공된 RT-LDPC 부호어일 경우, 상기 일반 RT-LDPC 부호어의 패리티 검사 행렬인 모 패리티 검사 행렬과 상기 천공된 RT-LDPC 부호어에 적용된 천공 패턴에 상응하게 자 패리티 검사 행렬을 생성한 후, 상기 천공된 RT-LDPC 부호어를 상기 자 패리티 검사 행렬에 상응하게 복호한다. 천공 방식, 모 패리티 검사 행렬, 자 패리티 검사 행렬, 연산수, 복호 속도
Abstract:
본 발명은 다중 홉 릴레이 방식을 사용하는 셀룰라 통신시스템에서 핸드오버 처리 장치 및 방법에 관한 것이다. 본 발명에 따른 중계국(Relay Station)의 통신 방법은, 기지국으로부터 후보 노드 리스트를 포함하는 핸드오버 요청 메시지를 수신하여 확인하는 과정과, 상기 핸드오버 요청 메시지를 단말기로 전송하는 과정과, 상기 단말기로부터 핸드오버 실행여부가 설정된 핸드오버 지시 메시지를 수신하여 확인하는 과정을 포함한다. 이와 같이 본 발명은 다중 홉 릴레이 시스템에서 단말기의 핸드오버 방안을 제안함으로써, 이동성을 갖는 단말기에게 통신 지속성을 보장할 뿐만 아니라 셀의 부하량(load) 관리 및 중계국 구성/배치 등을 용이하게 수행할 수 있는 이점을 제공한다. 릴레이 통신 시스템, 핸드오버, 중계국 요청, 기지국 요청
Abstract:
A method for encoding a rate-compatible block Low Density Parity Check (LDPC) code. The method includes designing specific LDPC codes for a predetermined number of coding rates, and generating a pruning pattern by comparing information node degrees of the predetermined number of LDPC codes; matching check node degrees of the predetermined number of LDPC codes; generating a predetermined number of puncturing patterns according to the check node degree when the matched check node degree is calculated; determining whether a first condition given for the generated puncturing patterns is satisfied; and determining the generated puncturing patterns as rate-compatible puncturing patterns when the puncturing patterns satisfy the first condition.
Abstract:
본 발명은 이동 가입자 단말기와, 기지국과, 상기 이동 가입자 단말기와 기지국 사이에 존재하며, 고정된 위치에서 신호를 중계하는 고정 중계기와, 상기 이동 가입자 단말기와 기지국 사이에 존재하며, 이동성을 가지면서 신호를 중계하는 이동 중계기를 포함하는 광대역 무선 접속 통신 시스템에서, 상기 이동 가입자 단말기가 상기 기지국의 서비스 영역 내에 존재할 경우 상기 고정 중계기 혹은 이동 중계기를 통해 신호를 중계하도록 제어하고, 상기 이동 가입자 단말기가 상기 기지국의 서비스 영역 밖에 존재할 경우 상기 고정 중계기를 통해 신호를 중계하도록 제어하여 기지국 서비스 영역 확대와 시스템 용량 증대를 획득한다. 다중홉 중계, FRS, MRS, 공통 채널, 전용 채널
Abstract:
발명은 직교 주파수 분할 다중 접속 방식을 사용하는 통신 시스템에서 고속 셀 스위칭을 위한 상향링크 제어 정보의 전송 장치 및 방법에 관한 것으로, 이러한 본 발명은 직교 주파수 분할 다중 접속 방식을 사용하는 통신 시스템에서 상향링크 제어 정보의 전송 방법에 있어서, 이동 단말기는 앵커 기지국을 변경하고자 하는 경우, 고속 피드백 채널을 통해 변경하고자 하는 타겟 앵커 기지국을 선택하고, 상기 선택된 타겟 앵커 기지국에 할당된 부호워드를 상기 현재 앵커 기지국으로 전송하는 과정과, 상기 부호워드를 수신한 상기 현재 앵커 기지국은 상기 부호워드에 해당하는 상기 선택된 타겟 앵커 기지국의 고속 피드백 채널 할당 정보를 상기 이동 단말기로 전송하는 과정과, 상기 이동 단말기는 상기 고속 피드백 채널 할당 정보에 상응하는 타겟 앵커 기지국을 새로운 앵커 기지국으로 변경하여 통신을 수행하는 과정을 포함하는 것을 특징으로 한다.
OFDMA, FAST FEEDBACK 채널, Fast Cell Switching, 채널 품질 제어 정보, 최적 기지국 정보, 모드 선택 정보.