Abstract:
PURPOSE: A method and system for random access in a small cell of a 3GPP LTE-advanced system are provided to fixedly allocate a preamble index to a mobile station entering a small cell. CONSTITUTION: A small scale base station periodically transfers a broadcast message to a mobile station(S310), and the broadcast message includes an available preamble index set. The mobile station is placed in the small cell. The small scale base station transfers the random access response to the mobile station by using a preamble index included in the random access(S330). The base station confirms whether or not the random access response is transmitted by using the preamble index(S340).
Abstract:
PURPOSE: A terminal device of a carrier aggregation based mobile communication system and a reporting buffer status method thereof are provided to efficiently use the total radio resources of a base station by optimally receiving the resources required from a terminal. CONSTITUTION: Obtained are the allocation of wireless resources for multiple component carriers from a base station(511-513). Plural MAC-PDUs(Medium Access Control-Protocol Data Units) are composed(521). The MAC-PDUs include the buffer state information corresponding to each component carrier, and the plural MAC-PDUs are transmitted to the base station through the plural component carriers(522).
Abstract:
이동국이 기지국으로 임의 접속 절차 중 하향링크 패킷들의 복합 자동 재전송 요청 동작을 위한 방법이 개시된다. 기지국은 수신된 임의 접속용 프리앰블에 기지국 내에서 식별자를 할당하고, 식별자 정보와 상향링크 제어 정보를 포함하는 응답 메시지를 이동국으로 전송한다. 기지국은 이동국의 고유 식별자를 포함하는 접속 요청 메시지를 상향링크 채널을 통해 수신하여, 고유 식별자를 이용하여 이동국에 하향링크의 확인 채널을 할당한다. 또한, 기지국은 접속 요청 메시지에 대한 접속 설정 메시지와 하향링크의 확인 채널에 대한 정보를 이동국으로부터 전송하고, 확인 채널을 통해 접속 설정 메시지에 대한 확인 메시지를 수신한다. OFDMA, HARQ, 임의 접속, 상향링크, 하향링크
Abstract:
An apparatus for controlling the states of a terminal, a method thereof, and an apparatus for transferring a paging message are provided to increase efficiency in using radio resources and to minimize the power consumption of a terminal by controlling state transition of the terminal according to QoS levels and applying different mobility management methods according to states of the terminal. A state control apparatus comprises a state control part(410), which exists in a network layer(III), and a sub-state control part(430), which exists in a data link layer(II). The state control part(410) sets a terminal to become a connected state or a disconnected state. Also the state control part(410) transits disconnected state of the terminal to an active state or an idle state. The sub-state control part(430) transits the active state of the terminal to an active sub-state or an idle sub-state. The state control part(410) allocates shared radio resources when the terminal is in the active state. The sub-state control part(430) measures the level of QoS through a measurement channel when the terminal is in the active sub-state, and allocates a part of shared radio resources dedicatedly to the terminal. The sub-state control part(430) inactivates the measurement channel when the terminal is in the idle sub-state. The sub-state control part(430), when the terminal is in the idle sub-state, operates a control channel and a data channel in a DTX(Discontinuous Transmission) or DRX(Discontinuous) method.
Abstract:
본 발명은 무선 휴대 인터넷 시스템에 있어서, 변조 및 채널 부호화 방법이 동일한 서비스의 상이한 가입자를 위한 정보를 하나의 무선자원을 할당하여 전송한다. 또한 동시에 할당된 무선자원에 대한 가입자의 식별자 정보를 공통제어 정보를 통하여 전송한다. 따라서, 하나의 무선자원 블록에 복수의 가입자를 위한 정보가 공존하여 전송될 수 있으며, 하향링크 정보를 수신한 가입자 단말기는 공통제어 정보로 전송된 가입자의 식별자 정보를 통하여 해당 단말기를 위한 정보가 어느 무선자원 블록에 할당되었는가를 알 수 있으므로 수신된 프레임에서 가입자 자신을 위한 정보가 할당된 특정한 무선자원 블록만을 억세스하여 정보를 획득할 수 있다. 무선 휴대 인터넷, 무선 자원, 공통 제어 정보, 변조, 채널 부호화, 커넥션 식별자
Abstract:
A state control device of a cellular system and a controlling method are provided to control state transition of a terminal according to QoS(Quality of Service) and the type of a packet service, thus efficient use of radio resources is possible while power consumption is reduced. When the state of a terminal is set as an active state, a resource manager(410) allocates reverse and forward traffic channels to the terminal, and if the state is set as an idle state, the manager(410) enables the terminal to stop synchronous maintenance for the reverse traffic channel. When a sub state of the active-state terminal is set as a scheduling state, a scheduler(440) allocates resources of the reverse and forward traffic channels to the terminal according to QoS supported to the terminal, and when the sub state is set as a scheduling excluding state, the scheduler(440) enables the terminal to non-continuously transceive packet data through the reverse and forward traffic channels.
Abstract:
본 발명은 자동 재전송 요청을 위한 피드백 메시지 생성 및 전송 방법에 관한 것이다. 본 발명의 구성에 따른 자동 재전송 요청을 위한 피드백 메시지의 생성 방법은 a) ACK 타입을 제 1 필드에 기록하는 단계; b) 연속적으로 ACK 된 블록의 마지막 블록 시퀀스 넘버를 측정하여 제 2 필드에 기록하는 단계; c) 단계 b)에서 측정된 블록 시퀀스 넘버이후에 연속적으로 ACK된 블록의 그룹의 개수를 ACK MAP 의 개수로서 제 3 필드에 기록하는 단계; d) 상기 각각의 ACK MAP의 시작 블록 시퀀스 넘버를 제 4 필드에 기록하는 단계; e) 상기 각각의 ACK MAP의 길이를 상기 단계 d) 의 블록 시퀀스 넘버와 대응시켜 제 5 필드에 기록하는 단계; 및 f) 상기 제 1 내지 제 5 필드의 정보를 포함한 피드백 메시지를 전송하는 단계를 포함한다. 무선 휴대 인터넷, 자동 재전송 요청, ARQ, ACK, NACK
Abstract:
본 발명은 이동통신 시스템에서의 채널품질정보 요청 및 보고 방법, 그리고 그 장치에 관한 것이다. 본 발명에서는 기지국이 상향링크 무선자원에 상기 채널품질정보의 보고를 위한 품질보고채널을 할당하고, 이러한 할당 정보를 단말기들로 전송한 다음, 채널품질정보 요청메시지를 생성하여 상기 단말기들에게 채널품질정보를 요청한다. 이에 따라 채널품질정보 요청메시지를 수신한 단말기들이 상기 기지국과의 통신을 위한 무선 채널 상태를 측정하여 채널품질정보를 생성하고, 상기 채널품질정보를 포함하는 채널품질정보 응답메시지를 생성하여 상기 할당 정보에 지정되어 있는 품질보고채널을 통하여 기지국으로 전송한다. 이러한 본 발명에 따르면 빠르게 변화하는 이동 무선 채널의 품질 정보를 적은 오버헤드로서 신속하고 신뢰성 있게 전송할 수 있다.
Abstract:
Disclosed is a method and device for controlling a power saving mode for applying the sleep mode for saving power consumption to the mobility of subscriber stations in a mobile communication network and a wireless Internet system. Subscriber stations entering the sleep mode are constantly grouped, listening intervals of the subscriber stations for each group are not superimposed, the existence state of traffic in the subscriber stations is independently notified for each group, and the overhead of signaling messages is minimized when the traffic is notified to the subscriber station in the sleep mode.
Abstract:
PURPOSE: A method for managing the transmission timing of a DL(DownLink) transport channel in a WCDMA system is provided to increase the data quality of a system by preventing a traffic frame, transmitted to a base station from a base station controller, from being out of synchronization, reducing the burdens of the base station controller and the base station for buffer management, and eliminating an excessive transmission delay. CONSTITUTION: If a transmission timing management function for DL transport channels begins after node synchronization(S600), a base station controller checks every TTI(Transmission Time Interval) whether frames to be sent to a DL are stored in a queue(S601). If stored frames exists in the DL queue, the base station controller copies a CFN(Connection Frame Number) value from a DL data frame stored in the last of the queue, makes a DL synchronization frame using the value, and stores it in the last of the queue(S603). If the base station sends the DL synchronization frame to a base station, the CFN of the sent frame is stored. At this moment, a standby timer is set a much as Twus(Timer for wait_ul_sync), and the base station controller waits for a UL(UpLink) synchronization frame(S604). If a UL synchronization frame is received(S606), the base station controller checks whether the CFN of the frame is matched with the CFN of the sent DL synchronization frame(S607). If the CFN of the UL synchronization frame is matched with the CFN of the DL synchronization frame, the base station controller reads the TOA(Time Of Arrival) value of the received frame, adjusts the TOA value so as to come close to the central value of an Rx window, and maintains the best DL frame transmission timing(S609).