Abstract:
PURPOSE: A method for controlling transmit power for home PNA(Phoneline Networking Alliance) technology-based Internet service is provided to minimize an excessive signal attenuation or a transfer error by an excessively big signal by transferring data after automatically selecting high power or low power according to line length. CONSTITUTION: In case that the link state of a concentrator is on, the concentrator measures the peak level and noise level of a received signal(4-5) and executes the first stage power control(4-6). In the first stage power control, if the peak level of the received signal is larger than an upper threshold, the concentrator determines the strength of a transmitting signal as a low power value. If the peak level of the received signal is smaller than a lower threshold, the concentrator determines the strength of the transmitting signal as a high power value. After executing the first stage power control, the concentrator executes the second stage power control in order to adjust a received power level to a target level(4-7).
Abstract:
PURPOSE: An internet service system is provided to extend a distance capable of connecting a home phone-line networking alliance(PNA) centralization apparatus and a home by adding a home PNA gateway intercepting an influence of a signal attenuation and a signal distortion, to the home. CONSTITUTION: An internet service system comprises a home phone-line networking alliance(PNA) centralization apparatus(101), a home PNA gateway(201) and a home PNA connection apparatus(105,106). The home PNA centralization apparatus(101) divides a data packet loaded on a home PNA fashion from signals received from plural subscribers, and transfers the divided signals to corresponding destinations. The home PNA gateway(201) makes a telephone signal transferred between a port of the home and a port of the home PNA centralization apparatus in both directions. The gateway(201) demodulates a home PNA signal received through a specific port to an original data packet, and then loads the data packet on another home PNA signal so as to be transferred to another port. The home PNA connection apparatus(105,106) is embedded in a personal computer or is connected to a communication interface(11), and sends data in a home PNA fashion. When a signal of the home PNA fashion is input through a telephone line, the home PNA connection apparatus(105,106) demodulates the received signal to an original data packet so as to be sent to the personal computer.
Abstract:
본 발명은 이더넷 스위치 또는 스위치와 단말간 연결된 링크 이상발생시 이를 신속하게 감지하여 백업 경로로 절체시켜 주기 위한 이더넷 링크 보호기에 관한 것이다. 통상 이더넷 스위치와 단말간에는 하나의 이더넷 링크로 연결되어 있어 스위치 또는 링크 고장시 단말은 통신이 불가능하게 된다. 서비스 중단이 심각한 영향을 미치는 단말의 경우 링크를 이중화하여 고장시 우회경로로 통신이 되도록 하는 이더넷 링크 보호기가 필요하다. 이더넷 링크보호기는 스위치 접속 링크를 2개로 분리하고 각각 이더넷 스위치로 접속하되 통신은 2개중 어느 하나와 이루어지도록 하며 사용중인 링크에 고장이 발생하는 경우 다른 링크로 우회시키는 기능을 수행한다. 그러나 이더넷링크보호기에서 우회링크로 경로를 변경시켜도 이더넷 스위치의 스위칭테이블은 우회된 경로로 이더넷 프레임이 전달되어 변경된 MAC 주소를 등록하기 전까지 이전 상태를 유지하고 있어 통신이 오랜시간 동안 두절되는 현상이 발생된다. 본 발명에서는 이를 방지하기 위하여 우회 링크로 경로가 변경되면 변경된 상태를 이더넷스위치의 스위칭테이블에 신속하게 등록될 수 있도록 송신지 주소영역에 단말의 주소를 넣은 주소등록용 제어 프레임을 이더넷 스위치로 전달하도록 하였다. 따라서 기존 방식에 비해 수백배 빠르게 통신경로 설정이 가능한 특징을 가진다. 이더넷 링크 보호기, 이더넷 프레임, 이더넷 스위치, 이중화, 액티브 링크
Abstract:
PURPOSE: A power control method for transmitting a long-distance data using a telephone line is provided to expand a conventional home PNA(Phoneline Networking Alliance) power level from the second stage to the fourth stage to adjust a power level minutely by minutely adjusting the power level according to a distance of the power level and maintaining a stable power level to transmit the long-distance data through the telephone line. CONSTITUTION: If a power is turned on(5-1), an initial value of a power level of an internet service distributing device is basically set as a highest value(5-2). A state of a link is checked, and the power level is set an upper value again when the link is turned off(5-3). If the line is turned on, a power level transmitted from subscriber terminals is measured(5-4). If the measured level value is higher than an upper reference value(5-5), the measured level value is set as a lower reference value(5-6) and the level value set as the lower reference value is transmitted to subscriber terminals through a command(5-7) to measure a received level again. The level value measured in the internet distributing device is higher than the upper level value and is lower than the lower reference value(5-5,5-8). The level value is set as the upper reference value(5-9) and the level value set as the upper reference value is transmitted to subscriber terminals through the command to measure the received level again.
Abstract:
PURPOSE: An apparatus for expanding a data transmitting distance of a phone line is provided to convert a signal pulse of a home phone line networking alliance(PNA) to change a band of a transmitting signal into a band having a least line loss, so as to simultaneously use the home PNA with a phone and to easily install the PNA without a splitter or a termination. CONSTITUTION: A home phone line networking alliance(PNA) signal transceiver(4-1-1) generates a home PNA signal according to transmission data, and receives the home PNA signal to restore data loaded into the home PNA signal. The home PNA signal transceiver(4-1-1) is connected with other data processing device through a medium independent interface(MII). A pulse converter(4-1-2) generates pulse signals having designated signal widths and the designated number of signals, whenever home PNA pulses are received from the home PNA signal transceiver(4-4-1). The pulse converter(4-1-2) makes the signal widths bigger than home PNA widths to lower signal frequencies. A band pass filter(4-1-3) makes a frequency decided by the designated signal widths and the designated number of the signals a central frequency, and passes regular sizes of upper/lower bands. A transformer(4-1-4) performs a line impedance matching and an isolation role.
Abstract:
PURPOSE: An illegal software duplication prevention method of a digital apparatus and an apparatus thereof are provided to encode an execution file and data to prevent copy of necessary software for digital apparatus operation. CONSTITUTION: An encryption key is generated in an encryption algorithm. The encryption key is stored in a volatile memory. An execution file and data are stored by using the encryption key. The software is sensed for illegal duplication. [Reference numerals] (AA) Power application; (BB) Kernel and RAM disk accumulation(OS booting completion); (CC) An encryption completion flag is set?; (DD) An image file which is not encrypted exists?; (EE) End; (F1) Creating an encryption key; (F2) Encrypting an image file; (F3) Inputting a key value to a key memory; (F4) Setting an encryption completion flag; (GG,JJ) A key value is effective?; (H1) Mounting a RAM disk; (H2) Key value Read; (H3) Decoding an image file; (H4) Setting an encryption completion flag; (I1) Starting a key value effectiveness examination; (I2) Executing an execution script; (K1) Abnormal state; (K2) Unmounting a RAM disk; (K3) Deleting an image file; (K4) System rebooting
Abstract:
본 발명은 이더넷 스위치 또는 스위치와 단말간 연결된 링크 이상발생시 이를 신속하게 감지하여 백업 경로로 절체시켜 주기 위한 이더넷 링크 보호기에 관한 것이다. 통상 이더넷 스위치와 단말간에는 하나의 이더넷 링크로 연결되어 있어 스위치 또는 링크 고장시 단말은 통신이 불가능하게 된다. 서비스 중단이 심각한 영향을 미치는 단말의 경우 링크를 이중화하여 고장시 우회경로로 통신이 되도록 하는 이더넷 링크 보호기가 필요하다. 이더넷 링크보호기는 스위치 접속 링크를 2개로 분리하고 각각 이더넷 스위치로 접속하되 통신은 2개중 어느 하나와 이루어지도록 하며 사용중인 링크에 고장이 발생하는 경우 다른 링크로 우회시키는 기능을 수행한다. 그러나 이더넷링크보호기에서 우회링크로 경로를 변경시켜도 이더넷 스위치의 스위칭테이블은 우회된 경로로 이더넷 프레임이 전달되어 변경된 MAC 주소를 등록하기 전까지 이전 상태를 유지하고 있어 통신이 오랜시간 동안 두절되는 현상이 발생된다. 본 발명에서는 이를 방지하기 위하여 우회 링크로 경로가 변경되면 변경된 상태를 이더넷 스위치가 신속하게 등록할 수 있도록 송신지 주소영역에 단말의 주소를 넣은 주소등록용 제어 프레임을 이더넷 스위치로 전달하도록 하였다. 따라서 기존 방식에 비해 수백배 빠르게 통신경로 설정이 가능한 특징을 가진다.
Abstract:
본 발명은 아파트 단지 및 빌딩 등에서 기존의 전화선을 이용하여 데이터를 전달하도록 하는 홈 PNA(Phone-line Networking Alliance) 방식을 적용한 인터넷 서비스의 전달거리를 확장하고 댁내의 다양한 장치들을 인터넷에 용이하게 접속할 수 있도록 하는 홈 PNA 게이트웨이 장치에 대한 것이다. 홈 PNA 방식은 가정내 전화선을 이용하여 이더넷 프레임을 전달할 수 있도록 하는 기술로 전화선과 같이 외부 잡음의 인입이 많고 선로가 댁내의 여러 방으로 분기되어 있어 임피던스 부정합에 의한 신호 반사가 많은 환경에 적합한 펄스위치변조 방식을 사용하고 있다. 이와같은 펄스위치변조 방식은 외부 잡음 및 반사신호에 의한 신호 왜곡에 강한 특징을 가지고 있으나 1Mbps 에서 반사파의 영향을 받지 않는 이론적인 최대 거리가 300m 정도로 제한된다는 단점을 가지고 있다. 따라서 홈 PNA 규격에서는 전달거리를 150m 로 규정하고 있다. 본 발명에서는 홈 PNA 에서 적용하고 있는 펄스위치변조 방식에서 반사파가 발생되지 않는 환경에서는 최대 전달거리가 신호감쇄 및 외부 잡음에 의해서만 제약이 되므로 전달거리를 홈 PNA 규격보다 확장할 수 있다는 점에 착안하여, 홈 PNA 집중화 장치와 가정내 단말 사이에 홈 PNA 게이트웨이를 추가하여 가정내에서 발생하는 반사신호를 차단하도록 하는 특징을 가진다. 홈 PNA 게이트웨이는 홈 PNA 집중화 장치와 가정까지의 인터넷 서비스 접속거리를 확장시켜 줄 뿐만 아니라 가정 내 PC 들간에는 인터넷 서비스 속도보다 빠른 통신이 가능하도록 해주며 가정 내 장치들간 홈 PNA 방식이 아닌 다양한 프로토콜을 동시에 사용할 수 있도록 하는 장치로 활용될 수 있는 부수적인 효과를 가진다.