Abstract:
A DPD relay system including a signal processing system which is possible to attach and separate one board and a signal processing method thereof are provided to comprise the signal processing system with the module detached and attached in one board by mounting the signal processing system to the DPD relay system. A signal processing system(100) is comprised of a DSP module mounted on a DPD board, an RVS module and an RCPU module. Three modules are comprised of the DPD board. A digital pre-distortion is performed about I signal and inputted Q signal. The DSP module receives the optical signal from the main hub unit and DPD relay system. The received optical signal is converted into the electric signal. The transformed electric signal is filtered by each channel by using a frequency allocation channel filter. The filtered digital signal is separated according to I signal and Q signal. The RVS module performs the low-noise-amplification about the radio frequency signal received with antenna.
Abstract:
본 발명은 선형 RF 평형 전력 증폭기에 관한 것으로, RF 평형 전력 증폭기 회로에서 발생하는 왜곡성분을 상쇄시키기 위하여 평형증폭회로를 구성하는 하나의 전력 증폭기1(14) 출력에서 추출한 신호를 활용하여 메인 전력 증폭기2(18)에서 발생하는 왜곡신호를 동시에 상쇄시킬 수 있도록 하며, 또한 왜곡신호의 이득과 위상을 적절하게 조절해 줄 수 있는 선형 RF 평형 전력 증폭기를 제공한다. 따라서, 본 발명에 의하면 전체 RF 평형 전력 증폭기 회로에서 발생하는 왜곡신호가 최대한 상쇄된 원하는 선형의 증폭된 출력신호를 얻을 수 있다.
Abstract:
본 발명은 전력증폭 동작이 효율적으로 이루어지면서 다중입력 다중출력 방식이 적용되는 와이브로 통신 시스템과 여러 대역의 전파를 중계할 수 있는 중계기용 전력증폭장치에 관한 것이다. 이를 위해 본 발명에서는 펜스를 통해 신호의 격리도를 갖는 다수의 스테이지를 형성하여 다수의 송신 경로(Pass)를 형성하므로 여러 개의 전력증폭기를 통합 설치될 수 있도록 하고 상기 전력증폭기의 효율적인 동작과 함께 신호간섭을 줄일 수 있는 하우징과; 상기 하우징의 스테이지 별로 구분 설치하는 여러 개의 전력증폭부와, 상기 전력증폭부를 통합 제어하는 제어 및 전원공급부를 갖는 전력증폭기를 포함하여 이루어진 중계기용 전력증폭장치를 제공한다. 따라서 본 발명은 효율적인 전력 증폭 동작과 함께 와이브로 통신 시스템과 여러 대역의 전파를 중계할 수 있고, 생산원가를 줄이며, 제품의 소형화와 경량화를 실현할 수 있는 매우 유용한 효과가 있다. 중계기, 3G, 3.5G, 와이브로, 전력증폭기.
Abstract:
A feed back canceling interference signal apparatus and a method of a wireless repeater which adaptively estimates the feed back interference signal are provided to remove interference signal through a receipt antenna and offer a high quality communication service. An autocorrelation operating unit(210) stores the transmission signal of the wireless repeater as the regular length. The autocorrelation calculation is performed about the stored signal. The time delay estimation part(220) saves the power of the autocorrelation function. The delay time is most estimated through the big value. The channel estimator(230) is delivered the delay time estimated at the time delay estimation part. The size and phase of the interference signal delayed as the time are estimated.
Abstract:
본 발명은 이동통신 중계기의 안테나용 틸팅유닛에 관한 것으로서, 특히 이동통신 중계기 또는 안테나의 설치방향 및 각도를 간단한 조작만으로 조절할 수 있음은 물론이고, 외부의 진동이나 충격에 의해 쉽게 유동되지 않으면서 방향 및 각도가 조절된 상태를 안정적으로 유지시킬 수 있는 방송 및 이동통신용 마이크로웨이브 장비에 사용되는 안테나의 틸팅유닛을 제공하기 위한 것이다. 이를 위하여 본 발명에서는 일측에 요크가 형성된 브래킷과, 이 브래킷의 요크와 대향하는 면에 그 요크와 수직이게 요크가 형성된 클램프와, 이 브래킷의 요크 및 클램프의 요크와 각각 힌지 결합되어 브래킷이 상하 및 좌우 방향으로 회전될 수 있도록 하는 조인트와, 이 클램프의 요크에 형성된 다수의 가이드홈을 따라 각각 이동하면서 브래킷의 회전 방향 및 각도가 조절된 상태를 유지시키는 다수의 고정봉을 포함하는 이동통신 중계기의 안테나용 틸팅유닛이 개시된다. 중계기, 안테나, 틸팅유닛, 고정봉
Abstract:
본 발명은 전력증폭기에 관한 것으로서, 특히 시분할 듀플렉스 방식 휴대인터넷용 중계기 및 기지국 시스템에서 수신구간동안 다운링크용 전력증폭기의 바이어스를 오프시켜서 수신구간동안 다운링크용 전력증폭기에서 발생할 수 있는 노이즈 레벨증폭을 차단함으로써, 수신구간동안 업링크용 전력증폭기의 수신감도 열화를 방지하고, 전류소모를 줄여 시스템의 효율을 향상시켜, 수신구간동안 전력증폭기의 노이즈 특성을 개선시킨 시분할 듀플렉스 방식 휴대 인터넷 시스템의 중계기 및 기지국에 적용되는 전력증폭기의 바이어스 제어장치 및 그 제어방법을 제공한다. 전력증폭기, TDD(시분할 듀플렉스), 휴대인터넷, 바이어스 제어
Abstract:
A digital linearization apparatus of a power amplifier in an optical repeater is provided to transmit an RF(Radio Frequency) signal to an optical cable, and to extract a baseband signal from the received RF signal, then to process the extracted signal through digital linearization, thereby increasing the efficiency of a power amplifier. An RF signal converted in an optoelectric converter(32) is mixed with a signal generated from a local PLL(Phase Lock Loop), and is inputted to a baseband signal extractor(102). The baseband signal extractor(102) extracts a baseband signal from the mixed signals, and inputs the extracted baseband signal to a baseband pre-distortion unit(104). The pre-distortion unit(104) pre-distorts the baseband signal. The pre-distorted signal is mixed with a signal generated from a frequency synthesizer, and is up-converted into a transmission frequency of a CDMA system, then is applied to an HPA(High Power Amplifier)(106).
Abstract:
PURPOSE: A remote optical unit is provided to increase efficiency of an HPA(High Power Amplifier) by reducing a PAPR(Peak to Average Power Ratio) of an addition signal, which is generated by using multi-FA(Frequency Assignment). CONSTITUTION: An optical switch(150) transceives an optical signal with a main hub unit. A digital optical module(200) transceives the optical signal with the optical switch. An FPGA(Field Programmable Gate Array)(300) reduces a PARR and processes a digital signal. A DAC(Digital to Analog Converter)(400) converts the digital signal inputted from the FPGA into an analog signal. An HPA(500) amplifies and outputs electric power of the received signal.
Abstract:
본 발명은 다중입력 다중출력 무선중계기의 귀환 간섭신호를 제거하여 통신 품질을 높일 수 있는 다중입력 다중출력 무선중계기의 귀환 간섭신호 제거장치와 그 방법을 제공하기 위한 것이다. 이를 위해 본 발명에서는 다중입력 다중출력 방식이 적용된 무선중계기에 있어서, 수신안테나로 수신되는 신호에 대하여 자기상관연산을 수행하고, 송신안테나의 출력경로를 온/오프 제어를 통해서 다중입력 다중출력에 따른 귀환 간섭신호를 순차적으로 추정한 후, 모든 송신안테나를 온시킨 상태에서 추정된 간섭신호를 제거하는 디지털 신호처리부를 포함하는 다중입력 다중출력 무선중계기의 귀환 간섭신호 제거장치가 개시된다. 무선중계기, 기지국, 귀환신호, IIR필터.
Abstract:
An inductor structure is provided to generate high quality factor and inductance at a high frequency using an active inductor structure of gyrator structure and a spiral inductor. A high-Q Inductor structure includes a feedback device which is inserted between a source part of transistor(M2) and a gate part of transistor(M1) in order to comprise a series-resonant circuit equivalent with a parasitic capacitance generated from the gate source part of both transistors(M1,M2). An active inductor which has a gyrator structure is composed of the transistors.