Abstract:
본 발명은 디지털 MOPLL 튜너에 적용되는 프렉션널-N 분주기 타입 위상동기루프에 관한 것으로, 본 발명은 사전에 설정된 프렉션널 분주비의 분수부에 기초해서 3차 시그마-델타(Σ△)신호를 출력하는 3차 시그마 델타 변조기(405)를 이용하고, 발진주파수의 분주 주파수(Fv) 및 기준주파수의 분주 주파수(Fr)와의 위상차에 따라, 상기 발진주파수(Fvco)를 위상 동기시키는 프렉션널-N 분주기 타입 위상동기루프를 제공하는 것을 특징으로 하며. 이러한 본 발명에 의하면, 3차 시그마-델타 변조기를 이용하여 구현하고, 다중 가변 분주비로 분주하도록 구현함으로서, 3차 시그마-델타 신호에 따라 발진주파수에 대해 다중 가변 분주를 수행하여 저 위상잡음 특성을 개선할 수 있고, 보다 간단하면서도 소형으로 제작 가능하다.
Abstract:
PURPOSE: A double conversion TV tuner is provided to remove an unnecessary image frequency included in a signal inputted to a secondary mixer. CONSTITUTION: A low noise amplifying unit(31) amplifies an input signal of TV broadcasting as a low noise. A primary oscillating unit(32) generates a primary oscillation frequency determined according to a primary tuning voltage in a predetermined primary oscillation frequency range. A primary mixer(33) mixes a signal from the low noise amplifying unit with the primary oscillation frequency from the primary oscillating unit, and provides a primary IF(Intermediate Frequency) signal. A BPF(Band Pass Filter)(34) passes a predetermined band including the primary IF signal from a signal outputted from the primary mixer. An image tracking filter(35) removes an unnecessary image frequency included in a signal outputted from the BPF. A secondary oscillating unit(36) generates a secondary oscillation frequency determined according to a secondary tuning voltage in a predetermined secondary oscillation frequency range. A secondary mixer(37) mixes a signal through the image tracking filter with the secondary oscillation frequency from the secondary oscillating unit, and provides a secondary IF signal.
Abstract:
PURPOSE: A tuner demodulation block having a tuner IC and a demodulation IC integrated into one chip is provided to reduce the volume and cost of the tuner modulation block and secure a marginal space of a printed circuit board. CONSTITUTION: A tuner demodulation block consists of a tuner IC and a demodulation IC which are integrated into one chip. The tuner IC includes a UHF input terminal(1), a VHF input terminal(2), a UHF oscillator(5) for generating a frequency identical to a carrier frequency of a UHF signal, a VHF oscillator(6) for generating a frequency identical to a carrier frequency of a VHF signal, a UHF mixer(3), a VHF mixer(4), an IF pre-amplifier(7), and a PLL(8). The demodulation IC includes a VIF amplifier(10), a VCO(12), a video detector(11), an AFT(13), an APC(14), an RF AGC(15), an EQ amplifier(17), a limiter(18), an FM VCO(19), an FM detector(20), and an AF amplifier(21).
Abstract:
본 발명은 인 페이즈 신호와 쿼드러처 페이즈 신호를 생성시키는 쿼드러처 신호 생성기에서, 피드백 제어방식을 이용하여 차동 발진 주파수와 동일한 주파수를 갖는 쿼드러처 신호를 생성하도록 구현한 쿼드러처 신호 생성기를 제공하는데 그 목적이 있다. 상기한 목적을 달성하기 위한 본 발명은, 사전에 설정된 차동 발진 주파수(fin)를 생성하는 발진부; 상기 발진부로부터 입력된 차동 발진 주파수(fin)와 입력되는 쿼드러처 신호(fout)와의 합 주파수(fin+fout)에 해당하는 차동 주파수(fm)를 생성하는 피드백타입 주파수 더블러; 및 상기 피드백타입 주파수 더블러로부터 입력되는 차동 주파수(fm)를 "1/2"의 주파수로 디바이드하여 2개의 차동 출력 주파수(fout-I,fout-Q)를 갖는 쿼드러처 신호(fout)를 생성하는 주파수 디바이더를 구비한다. 이러한 본 발명에 의하면, 보다 확실한 대칭적 특성을 보장할 수 있는 효과가 있다.
Abstract:
본 발명은 IMT-2000 단말기, PCS 단말기 등의 이동통신 단말기에 적용되고, TV방송을 수신하는 기능을 저전력 및 고성능으로 구현하기 위한 트리플 컨버젼 TV 튜너 및 이를 이용하는 이동통신 단말기를 제공하는데 그 목적이 있다. 본 발명은, TV방송 안테나(ANT1); 상기 TV방송 안테나(ANT1)를 통한 TV방송신호중 채널선택신호(SCH)에 따라 선택된 TV채널의 주파수를 사전에 설정된 이동통신 주파수로 상향 변환하는 상향 변환부(22A); 상기 상향 변환부(22A)로부터의 신호를 이동통신 단말기의 중간 주파수에 해당되는 1차 중간주파 신호(IF1)로 변환하는 제1 하향 변환부(24); 및 상기 제1 하향 변환부(24)로부터의 1차 중간주파 신호(IF1)를 사전에 설정된 TV방송의 중간주파수에 해당되는 2차 중간주파 신호(IF2)로 변환하는 제2 하향 변환부(22B)를 구비하는 트리플 컨버젼 TV 튜너를 제공하는 것을 특징으로 하고, 또한, 이러한 트리플 컨버젼 TV 튜너를 이용하는 이동통신 단말기를 제공하는 것을 특징으로 한다. 이러한 본 발명에 의하면, 소형 제작이 가능하고, 장소 및 시간에 구애받지 않고 TV방송을 수신하여 시청할 수 있는 효과가 있다.
Abstract:
본 발명은 멀티바이브레이터(multi vibrators)를 이용하여 쿼드러처 전압제어발진기를 구현하여 집적회로로 구현하기에 적합한 신호 복조기를 제공하는데 그 목적이 있다. 본 발명은, 집적회로로 구현하기에 적합한 신호 복조기에 있어서, 서로 180°의 위상차를 갖는 한쌍의 제1 발진주파수(Fo1)와, 상기 제1 발진주파수(Fo1)와 90°의 위상차를 갖고, 서로 180°의 위상차를 갖는 다른 한쌍의 제2 발진주파수(Fo2)를 발생하고, 상기 제1 및 제2 발진주파수(Fo1,Fo2)는 튜닝전압(VT)에 따라 제어되는 전압제어발진부(220); 입력되는 입력신호(Sin)와 상기 전압제어발진부(220)로부터의 제1 발진주파수(Fo1)와 믹싱하여 베이스벤드 신호를 출력하는 신호 검파기(230); 상기 입력신호(Sin)와 상기 전압제어발진부(220)의 제2 발진주파수(Fo2)와의 위상차를 검출하고, 이 위상차에 해당되는 전압을 출력하는 APC 검출부(270); 및 상기 APC 검출부(270)로부터의 전압을 노이즈를 제거하여 상기 전압제어발진부(220)에 튜닝전압(VT)을 공급하는 LPF(280)를 구비하여 이루어진 것을 특징으로 한다.
Abstract:
본 발명은 광대역의 주파수를 발진하는 전압제어발진기에서 공진회로의 저항성분을 줄임으로서 고주파특성을 개선하고, 충실도를 높여 위상잡음특성을 개선한 파수 가변 회로 및 이로부터 구현된 전압 제어 발진기에 관한 것이다. 상기 발진주파수 가변회로는 소정의 고정 인덕턴스값을 갖는 인덕턴스 소자와, 상기 인덕턴스 소자와 병렬로 연결되고 제1제어신호에 따라서 캐패시턴스 값이 변화되는 하나 이상의 버랙터 다이오드쌍으로 이루어져 발진주파수를 미세조정하는 주파수 가변 수단과, a) 각각 소정의 캐패시턴스값을 갖는 한 쌍이상의 캐패시턴스 소자들과, b) 상기 각 캐패시턴스 소자 쌍의 사이에 병렬로 구비되어 제2제어신호에 따라서 대응하는 캐패시턴스 소자 쌍을 상기 인덕턴스 소자에 연결시키는 한 쌍이상의 차동 스위칭 소자를 포함하여, 발진주파수 대역을 선택하는 발진대역 가변 수단으로 이루어져, 턴온된 스위칭소자가 캐패시턴스 소자에 대하여 병렬로 연결됨으로서 저항성분을 감소시켜 충실도(Q)를 높히는 것이다.
Abstract:
PURPOSE: A triple conversion TV tuner and a mobile terminal using the same are provided to enable a user to receive and watch a TV broadcast at any time and anywhere by realizing a function of receiving a TV broadcast at low power and at high performance. CONSTITUTION: A triple conversion TV tuner comprises a TV broadcast antenna, an upconverter(22A), the first downconverter(24), and the second downconverter(22B). The upconverter(22A) upconverts the frequency of a TV channel, selected according to a channel selection signal(SCH) among the TV broadcast signals through the TV broadcast antenna, into a preset mobile communication frequency. The first downconverter(24) converts a signal transmitted from the upconverter(22A) into a primary intermediate frequency signal equivalent to the intermediate frequency of a mobile terminal. The second down converter(22B) converts the primary intermediate frequency signal into a secondary intermediate frequency signal corresponding to a preset TV broadcast intermediate frequency.
Abstract:
PURPOSE: A mobile communication terminal having a TV broadcasting receiving function is provided to up-convert a TV broadcasting frequency into a mobile communication frequency and select a TV broadcasting channel. CONSTITUTION: A TV broadcasting tuning unit(21) selects a desired channel according to a channel selection signal among a plurality of channels included in a TV broadcasting signal from an antenna(ANT), and converts a frequency of the selected channel into a mobile communication frequency. A mobile signal processing unit(22) converts the TV signal converted in the TV broadcasting tuning unit into an IF(Intermediate Frequency) signal. A baseband analog unit(23) converts the analog IF signal from the mobile signal processing unit into a digital signal. A key input unit(24) processes the input of a channel selection key and a volume adjustment key. An MSM(Mobile Station Modem) unit(25) provides the channel selection signal according to channel selection through the key input unit to the TV broadcasting tuning unit, recovers the digital signal from the baseband analog unit, and controls the output of an audio and a video of the TV signal. A video display unit(26) outputs the video signal from the MSM unit. An audio output unit(27) outputs the audio signal from the MSM unit.
Abstract:
PURPOSE: A variable gain amplifier using a current mirror is provided, which controls a gain more easily with a simple structure. CONSTITUTION: According to the variable gain amplifier including more than one common-source transistor amplifying an input signal, a current mirror circuit is connected to a source port of the common-source transistor and varies an operation point drain current of the common-source transistor according to a gain control voltage. The current mirror circuit comprises the first gain varying transistors(M25,M26,M27) comprised between the source port of the common-source transistor and a ground, and the second gain varying transistor(M28) whose gate port is connected to a gate port of the first gain varying transistor and acts as a diode, and the third gain varying transistor(M29) controlling a reference current applied to the second gain varying transistor.