Abstract:
본 발명은 이동단말과, 상기 이동단말로 제어 정보를 전송하는 기지국으로 구성되는 이동통신 시스템에서 전송된 제어 정보를 이용하여 상기 이동단말에서 기지국으로 데이터를 전송하는데 사용할 데이터 레이트를 결정하는 방법에 있어서, 단말의 버퍼상태와 최대 전송전력을 고려하여 최적의 데이터 레이트를 결정하는 과정과, 상기 결정된 데이터 레이트가 이전 시점에서 사용한 데이터 레이트보다 높고, 상기 결정된 데이터 레이트에 대응되는 제어정보의 수치가 설정된 값보다 높은 지 비교하는 과정과, 상기 비교 결과 높다고 판단되면 상기 이전에 사용한 데이터 레이트보다 일정 범위 이내의 데이터 레이트를 이용하여 데이터를 전송하는 과정으로 이루어짐을 특징으로 한다. CDMA, 스케쥴링, 전송속도, TFCS, TFC, UE 포인터
Abstract:
본 발명은 직접시퀀스 부호분할다중접속 통신시스템에서 다중 경로 신호들을 수신하는 코드 추적 장치 및 방법방법으로서, 할당된 다중 경로 신호보다 빠른 제1 경로에서 간섭 신호 성분을 제거한 빠른 경로 에너지를 계산하는 과정과, 상기 할당된 다중 경로 신호보다 느린 제2 경로에서 간섭 신호 성분을 제거한 느린 경로 에너지를 계산하는 과정과, 상기 빠른 경로 에너지와 상기 느린 경로 에너지를 이용하여, 상기 할당된 다중 경로 신호의 타이밍 정보를 산출하는 과정과, 상기 산출된 타이밍 정보에 따라 상기 할당된 다중 경로 신호를 수신하는 과정을 통하여 서로 다른 시간지연을 가지는 다중경로신호를 복조하는 핑거의 동일한 경로를 추적하는 팻 핑거 현상을 방지할 수 있으며, 이에 따라 시간 다기화 효과를 얻음으로써 수신 품질을 높일 수 있는 효과가 있다. RAKE RECEIVER, FAT FINGER, LATE-TIME, EARLY-TIME, SQUARE ROOT RAISED COSINE FILTER
Abstract:
A device for multi-path searching and energy reporting in a mobile communication system and a method therefor are provided to supply a multi-path searcher having a high detection probability with a very low false alarm probability for good paths, thereby tremendously improving receiver performance. A coherent accumulator(312) coherently accumulates descrambled and dispread receiving signals to divide the accumulated signals into actual number components and imaginary number components, and outputs the divided components. A peak emphasis signal calculator(314) inputs the actual and imaginary number components, and generates peak emphasis signals every time for the current point of time by using components within previous 2 points of time. A non-coherent accumulator(316) non-coherently accumulates the generated peak emphasis signals. A peak detector(318) detects peaks from the non-coherently accumulated signals. A maximum energy searcher(334) selects maximum energy values and equivalent location information from the detected peaks. A finger allocator(320) allocates signals of equivalent paths to fingers for demodulation by using the searched maximum energy values and location information.
Abstract:
본 발명은 수신 신호의 특정 시점에서의 에너지 값을 이용하여 상기 수신신호의 수신시점을 추정하는 이동통신 시스템에 있어, 전달된 값을 이용하여 동일한 에너지 값을 갖는 두 시점을 검색하고, 상기 검색된 두 시점으로부터 동일한 간격으로 일정 간격 떨어진 시점들에서의 에너지 비가 설정된 범위 내의 값을 갖는 지 판단하고, 상기 판단 결과 상기 에너지 비가 상기 설정된 범위 내의 값을 갖는 경우에는 상기 수신신호가 간섭신호나 인접신호의 영향을 받지 않는다고 추정한다. 이동통신 시스템, 가중치, 다중 경로, 근접 신호
Abstract:
PURPOSE: A bit interleaving device and a method in a mobile communication system are provided to carry out a bit interleaving process for changing a repetition period of encoding bits outputted through a channel encoding process, thereby preventing performance deterioration caused during a channel decoding process. CONSTITUTION: A bit selector selects columns of information bits and columns of surplus bits from encoding bit columns. A bit interleaver(822) interleaves each surplus bit column in predetermined bit unit, to prevent a repetition period of the surplus bits from being identical with punching patterns in accordance with a rate matching. A rate matching unit(824) inputs the bit-interleaved surplus bit columns and the information bit columns, and outputs the inputted columns as the number of transmissible bits through a physical channel.
Abstract:
An apparatus and a method for tracking a time in a mobile terminal are provided to improve a receiving performance by preventing a multi path which tracks a timing from converging into one through each finger. An apparatus for tracking a time in a mobile terminal includes a first timing tracker(180), a second timing tracker(580), and a loop filter(590). The first timing tracker(180) inputs a timing error to the loop filter(590) by calculating a difference between first signal energy which is faster than an on-time signal, and second signal energy which is slower than the on-time signal. The second timing tracker(580) inputs an adjustment value of a bandwidth to the loop filter(590) by comparing third signal energy which is faster than the first signal with fourth signal energy which is slower than the second signal. The loop filter(590) receives the timing error and the adjustment value of the bandwidth and outputs a timing control signal.
Abstract:
PURPOSE: A method and a device for detecting a timing error in a mobile communication system are provided to exactly estimate and receive a spreading delay path from an adjacent spreading delay path, thereby exactly estimating multi-path signals received on a near path while preventing multiple paths from converging on one. CONSTITUTION: An EL(Early Late)-TED(Time Error Detector) searches for two points having the same energy value on the basis of a specific point(600). The EL-TED calculates an equation '15' by using the searched two points(602). The EL-TED decides whether the calculated value is included within the range of a preset boundary value(604). If so, the EL-TED searches for a point having a maximum energy value by a general ED-TED operation, and restores a receiving signal by using the signal received from the searched point(606).
Abstract:
A fake path detection method in a receiver of a mobile communication system and a device thereof are provided to eliminate a fake path detected by ripples of a baseband pulse shaping filter, in order to detect a location of an available multi-path signal in a DS(Direct-Sequence) CDMA(Code Division Multiple Access) system. Peak energies and peak indexes of peaks of signals received from a base station are detected(900). Fake path inspection for the peaks is conducted on the basis of the peak indexes and the peak energies(902). Energies of peaks which are not decided as fake paths are compared with a predetermined finger allocation threshold value(904). Fingers are allocated to peaks exceeding the finger allocation threshold value(906).
Abstract:
본 발명은 직접시퀀스 부호분할다중접속 통신시스템에서 다중 경로 신호들을 수신하는 코드 추적 장치 및 방법에 관한 것이다. 다중경로 수신신호를 소정 칩 속도로 샘플링하여 현재 샘플지점을 기준으로 현재지점 샘플과 이른 지점 샘플과 늦은 지점샘플을 출력하는 과정과, 상기 현재 샘플 시점을 기준으로 매 칩마다 스크램블링 코드를 발생시키는 과정과, 상기 이른 지점 샘플과 상기 스크램블링코드를 상관시킨후 1칩 만큼 지연시켜 지연된 이른 지점 상관값을 계산하는 과정과, 상기 늦은 지점 샘플과 상기 스크램블링코드를 상관시킨후 1칩 만큼 지연시켜 지연된 늦은 지점 상관값을 계산하는 과정과, 상기 스크램블링코드와 1칩만큽 지연된 상기 현재 지점 샘플을 상관시킨 후 소정의 가중인자를 곱하여 제 1 가중 상관값을 구하는 과정과, 상기 현재 지점 샘플과 1칩만큽 지연된 상기 스크램블링 코드를 상관시킨 후 상기 가중인자를 곱하여 제 2 가중 상관값을 구하는 과정과, 상기 지연된 이른 지점 상관값에서 상기 제 1 가중 상관값을 감산하여 제 1 감산값을 구하는 과정과, 상기 지연된 늦은 지점 상관값에서 상기 제 2 가중 상관값을 감산하여 제 2 감산값을 구하는 과정과, 상기 제 2 감산값에서 상기 제 1 감산값을 감산하여 타이밍 에러를 검출하는 과정과, 타이밍 에러에 따라 상기 현재 샘플 시점을 조정하는 과정을 통하여 서로 다른 시간지연을 가지는 다중경로신호를 복조하는 핑거의 동일한 경로를 추적하는 팻 핑거 현상을 방지할 수 있으며, 이에 따라 시간 다기화 효과를 얻음으로써 수신 품질을 높일 수 있는 효과가 있다. RAKE RECEIVER, FAT FINGER, LATE-TIME, EARLY-TIME, SQUARE ROOT RAISED COSINE FILTER
Abstract:
본 발명은 고속 패킷 전송 시스템(HSDPA)의 기지국에서 레이트 매칭(rate matching)되어 송출된 순방향 패킷 데이터를 이동 단말에서 수신하여 디레이트 매칭하는 방법 및 그 장치에 대한 것으로서, 그 기술적 구성은 고속 패킷 전송 시스템의 소정 송신단에서 레이트 매칭된 패킷을 수신하여 디레이트 매칭하는 장치에 있어서, 상기 수신 패킷을 일시 저장하기 위한 수집 버퍼와, 상기 수집 버퍼로부터 출력된 수신 패킷을 미리 정해진 소정 메모리 주소 정보에 따라 저장하는 결합 버퍼와, 상기 송신단에서 송출되는 소정 HARQ 파라미터가 포함된 고속 공용 채널 정보를 디코딩하고 상기 수집 버퍼와 상기 결합 버퍼 사이의 디레이트 매칭 동작을 전반적으로 제어하는 제어부와, 상기 디코딩된 HARQ 파라미터를 근거로 상기 레이트 매칭 시 천공된 비트의 위치 정� �가 포함된 상기 메모리 주소 정보를 생성하는 주소 생성부와, 상기 메모리 주소 정보를 저장하는 주소 버퍼와, 상기 제어부의 제어 하에 상기 디레이트 매칭의 수행 전에 상기 천공된 비트의 메모리 주소를 포함하여 상기 결합 버퍼의 메모리 주소에 저장된 적어도 하나의 데이터를 초기화하는 제로 삽입부를 포함하여 구성됨을 특징으로 한다. 따라서 본 발명에 의하면, 고속 패킷 전송 시스템에서 추가적인 버퍼를 사용하거나 전송 클럭을 높이지 않고도 수신단에서 수신된 패킷의 디레이트 매칭 시간을 대폭 단축시킬 수 있는 디레이트 매칭 방법 및 그 장치를 제공할 수 있다.