Abstract:
본 발명은 무선 통신 시스템에서 망 정보 분석에 대한 것으로, 분석 방법은, 단말에 의해 측정된 채널 품질 정보를 수신하는 과정과, 상기 채널 품질 정보에 기초하여 판단된, 상기 채널 품질이 측정된 위치에서의 CA(carrier aggregation) 커버리지(coverage) 불일치(mismatch) 여부에 대한 정보를 출력하는 과정을 포함한다. 또한, 본 발명은 상술한 실시 예와 다른 실시 예들도 포함한다.
Abstract:
PURPOSE: An apparatus for updating a neighboring list in a mobile communication system and a method thereof are provided to update a neighboring list to which the micro base stations are reflected in an wireless environment in which micro base stations are installed/removed by a user. CONSTITUTION: A terminal for updating a neighboring list in a mobile communication system stores the first log information when the connection with the first base station is cut off(200,202), performs a network entry procedure with the second base station after the connection is cut off(204), and generates/transmits the second log information to the second base station(210).
Abstract:
본 발명은 이동통신 시스템에서 이웃목록을 갱신하기 위한 장치 및 방법에 관한 것으로, 제 1 기지국과 연결이 끊길 시, 제 1 로그 정보를 저장하고, 상기 제 1 기지국과 연결이 끊긴 후에 제 2 기지국과 네트워크 진입(network entry) 절차를 수행하고, 상기 제 2 기지국에 제 2 로그 정보를 생성하여 전송하는 단말과,상기 제 1 기지국과 연결이 끊긴 상기 단말과 네트워크 진입절차를 수행하고, 상기 해당 단말에 대역폭을 할당하여 로그 정보를 수신하고, 상기 로그 정보를 이용하여, 이웃목록 갱신이 필요한지를 판단하고, 상기 이웃목록 갱신이 필요할 시, 이웃목록을 갱신하여 상기 이전 기지국으로 갱신된 이웃목록 정보를 전송하는 제 2 기지국과, 상기 제 2 기지국으로부터 갱신된 이웃목록 정보를 수신하는 상기 제 1 기지국을 포함하여, 초소형 기지국들이 사용자에 의해 설치/제거되는 무선환경에서 상기 초소형 기지국을 반영한 이웃목록을 갱신할 수 있는 이점이 있다. 이웃목록(neighbor list), 자가구성(SELF-CONFIGURATION), 포스트 피드백(post feedback).
Abstract:
본 발명은 다중 입출력 무선통신 시스템에서 단말기의 빔 성형(beamforming)에 관한 것으로, 단말기의 동작은, 다수의 빔 성형 가중치 벡터들 각각을 통해 빔 성형된 사운딩 신호들을 순차적으로 송신하는 과정과, 상기 사운딩 신호들을 이용하여 기지국에 의해 결정된 상향링크 가중치 벡터 및 최대 채널 품질 값을 나타내는 제어 정보를 수신하는 과정과, 상기 상향링크 가중치 벡터에 따라 빔 성형된 송신 신호를 다수의 안테나들을 통해 송신하는 과정을 포함하여, 단말기의 빔 성형을 통해 채널 품질을 최대화할 수 있고, 특히, 상기 단말기의 빔 성형에 기반하여 상향링크 공간분할 다중 접속을 수행함으로써 상향링크의 전송용량을 극대화할 수 있다 MIMO, 빔 성형, 공간분할 다중 접속, 무선통신 시스템
Abstract:
본 발명은 시분할 복신 시스템에서 상·하향링크의 전송 방향이 일치하지 않는 경우, 인접 셀과의 간섭을 줄이기 위한 시분할 스케줄링 장치 및 방법에 관한 것으로서, 수신신호를 이용하여 신호를 전송하기 위한 채널을 추정하는 과정과, 상기 채널 추정 정보를 이용하여 신호를 전송하기 위한 채널 점유시간을 결정하는 과정을 포함하며, 상기 채널 점유시간을 결정하는 과정은, 상기 채널 추정 정보를 이용하여 링크 게인(Link Gain)을 산출하는 과정과, 상기 링크 게인을 이용하여 신호를 전송하기 위한 채널 점유 비율을 결정하는 과정과, 상기 채널 점유 비율에 따라 신호를 전송하기 위한 채널 점유시간을 산출하는 과정을 포함하여, 인접 셀간의 간섭을 줄이며, 최소한의 시간을 사용하여 요구되는 신호대 잡음비를 획득할 수 있는 이점이 있다. 시분할 복신(Time Division Duplex) 시스템, 채널 할당, 채널 점유율, 간섭
Abstract:
PURPOSE: A method and apparatus for valancing loads and for allocating power based on the load prediction of neighbor cells are provided to minimize load terminals by determining a power and handover terminal group. CONSTITUTION: A reception unit(300) receives information for predicting each load of neighbor base stations from the neighbor base stations. A first determination unit(306) determines a power and handover terminal group based on information for predicting each load of the neighbor base station. A control unit(302) determines the power and handover terminal group for minimizing load terminals using information for predicting the load of the neighbor base station. The load terminal includes a minimum demand transmission rate which is bigger than an average reception rate. [Reference numerals] (300) Reception unit; (302) Control unit; (304) Transmission unit; (306) First determination unit; (308) Second determination unit
Abstract:
PURPOSE: A sub-band scheduling method in a wireless communication system and apparatus thereof are provided to continually offer a service without degrading quality by changing wireless resource usage state information between an adjacent cell and an overload state cell. CONSTITUTION: In case one or more adjacent cells receives a run report, a control unit controls the request of the run report(404, 406). In case a sub-band restriction method is performed, the control unit controls the sub-band restriction method(408). The control unit initializes numbers of total sub bands and starting sub-band information(410). The control unit executes a sub-band scheduling(412).
Abstract:
본 발명은 무선 통신 시스템에서 심벌 분할 다중 접속(SDMA: Symbol Division Multiple Access, 이하 'SDMA'라 칭하기로 한다) 방식을 이용하여 채널 상태에 따라 데이터를 송수신하기 위한 방법 및 시스템에 관한 것이다. 이를 위해 본 발명은, 다수의 이동국들과, 상기 다수의 이동국들로 서비스를 제공하는 기지국을 포함하는 무선 통신 시스템에서, 상기 이동국들의 채널 상태에 따른 데이터 송신 방법에 있어서, 상기 이동국들로부터 채널 정보를 수신하면, 상기 채널 정보에 상응하여 소정의 변조 방식을 결정하고, 상기 결정된 변조 방식에 상응하여 소정 비트의 심벌들을 구성하는 과정과, 상기 구성된 심벌들의 소정 비트에 상기 채널 정보에 상응하여 전송할 데이터를 순차적으로 매핑한 후, 상기 매핑된 심벌을 상기 이동국들로 전송하는 과정을 포함한다. Symbol Division Multiple Access, Adaptive Modulation, 채널 상태, 비트 할당, 데이터 송수신