Abstract:
PURPOSE: Provided are a self-humidifying polymer membrane for a polymer fuel cell, which is produced by using a sputtering method, and a process for producing a self-humidifying polymer membrane/electrode laminate by using the self-humidifying polymer membrane. CONSTITUTION: The self-humidifying polymer membrane is produced by a process comprising the steps of: forming a pre-foamed precursor sheet by hot pressing or rolling a perfluorosulfonylfluoride/TFE copolymer resin; laminating platinum particles on one side of the pre-foamed precursor sheet by sputtering; laminating closely other pre-foamed precursor sheet on the platinum laminated side; making a pre-foamed precursor sheet laminate by hot pressing or rolling the laminated two pre-foamed precursor sheets; impregnating the pre-foamed precursor sheet laminate in a caustic soda solution to produce Na+ type perfluorosulfonate polymer membrane. And the process for producing the self-humidifying polymer membrane/electrode laminate comprises the steps of: making the electrode by coating a film with a catalyst ink comprising platinum coated carbon, a nafion solution, glycerol, and tetrabutyl ammonium hydroxide; laminating the electrode on the Na+ type polymer membrane and hot pressing; soaking the self-humidifying polymer membrane/electrode laminate in a sulfuric acid solution to produce H+ type polymer membrane/electrode laminate; cleansing the H+ type polymer membrane/electrode laminate with deionized pure water many times.
Abstract:
본 발명은 고분자 연료전지용 자기 가습 고분자막과, 자기 가습 고분자막/전극 접합체의 제조 방법에 관한 것이다. 본 발명 자기 가습 고분자막의 제조 방법은, 퍼플루오로설포닐 플루오라이드/티에프이 공중합체 레진을 열간 가압 내지는 롤링하여 프리폼 전구체 쉬트로 성형하는 단계와, 백금 입자를 스퍼터링에 의하여 전구체 쉬트의 일측 표면에 증착시키는 단계와, 백금 증착면에 백금을 증착시키지 않은 전구체 쉬트를 밀착 적층시키는 단계와, 상기 적층된 두 장의 전구체 쉬트를 열간 가압 내지는 롤링 처리하여 전구체 쉬트 접합체로 만드는 단계와, 완전히 결합된 상기 전구체 쉬트 접합체를 가성소다 용액 중에 침지시켜 Na + 형태의 고분자막으로 변환시키는 단계로 이루어진다. 그리고, 상기의 방법에 Na + 형태의 고분자막을 황산 수용액에 침지시켜 H + 형태의 고분자막으로 전환시키는 수화처리를 하는 공정이 부가될 수도 있다. 본 발명 고분자 연료전지용 고분자막/전극 접합체의 제조 방법은, 백금이 입혀진 카본을 나피온 용액 등을 혼합하여 촉매 잉크를 제조하는 단계와, 촉매 잉크를 필름 표면 위에 코팅하는 단계와, 촉매 잉크가 코팅된 필름을 진공 건조시키는 단계와, 상기 전극과 본 발명 방법에 의한 Na + 형태의 자기 가습 고분자막에 적층하는 단계와, 적층된 전극과 고분자막을 열간 가압법으로 압착시켜 자기 가습 고분자막/전극 접합체를 제조하는 단계와, 상기 접합체를 황산 용액중에 침지시키는 단계와, 접합체를 꺼내어 탈이온화된 순수물로서 세정하는 단계로 이루어진다. 본 발명의 자기 가습 고분자막 제조 방법은 고주파 마그네트론 스퍼터링에 의하여 백금을 증착시키는 수단을 사용함으로써, 증착량과 증착 범위의 조절이 쉬우며, 열간 가공에 의한 용융접합으로 전구체 쉬트를 결합시키고 증착된 백금 입자를 분산시킴으로써 화학반응을 통하여 고분자막 내부에 백금 촉매를 함침시키는 다른 방법들에 비해 비교적 간단하고 화학적으로도 안정한 특징이 있다.
Abstract:
본 발명은 인산형 연료전지용 전해질 매트릭스로서 높은 기공율, 인산함침도 및 이온 전도도를 가지며 충분한 가소성을 가져 실제 미입에 용이한 대칭, 면적 매트릭스의 제조방법에 관한 것으로서, 인산형 연료전지용 전해질 매트릭스의 제조방법으로서 SiC 휘스커 분말에 분산제를 혼합 교반하여 분산시키고, 한편 SiC 휘스커 분말에 결합제 PES를 넣고 용해시킨 후 가스제를 혼합 교반하여 가소시키고, 상기 2가지 용액을 SiC 휘스커 슬러리에 첨가 교반 시킨후 테이프 캐스팅시키고 건조후 열처리하여 제조한 것이다.
Abstract:
The electrolyte matrix improves electric density as well as making it thin. The carbonized silica whisker(TWS100) is mixed with particle of carbonized silica and a lot of solvent of casted material is evaporated to increase porous ratio. The polyestersulfone as hydrofile binder is added to the phosphoric acid to increase water absorption. It is also added dispersing material to increases dispersion ratio of particle so that the matrix having large surface could be manufactured.
Abstract:
인산형 연료전지의 전해질 매트릭스에 있어서, 종래의 것보다 높은 기공율과 인산함침도 및 높은 이온전도도를 갖는 매트릭스의 제조방법에 관한 것으로 테이프캐스팅(tape casting)법으로 제조할 수 있는 탄화규소 분말과 탄화수소 휘스커(whisker)의 비는 1:1에서 0:1, 그리고 결합제(PES, 무게비로 5-20%)를 조성하여 4poise점도의 슬러리를 형성하고 이를 테이프캐스팅시 닥터브레이드(doctor dlade)의 앞날의 두께는 0.6mm, 뒷날의 두께는 0.4mm로 하여 10cm/sec 속도로 3000℃에서 20분간 열처리 하고 분산제를 무게비로 3% 첨가함을 특징으로 하는 테이프캐스팅법으로 제조한 인산형 연료 전지용 전해질 매트릭스.