Abstract:
본 발명은 IPv6 기반 망이동성 서비스에서 경로 최적화 방법에 관한 것으로서, 이동라우터가 외부링크로 핸드오버할 경우에, 상대노드가 홈에이젼트로 전송한 패킷을 통해 획득된 상대노드의 주소와, 홈에이젼트 바인딩 캐쉬에 포함된 데이터 정보를 이용하여 홈에이젼트에서 바인딩 업데이트 메시지를 생성하여 상대노드로 전송하는 단계와, 상기 홈에이젼트로부터 수신한 바인딩 업데이트 메시지에서 이동라우터 바인딩 리스트에 포함된 데이터 정보를 추출하여 상대노드 바인딩캐쉬에 엔트리를 추가하여 바인딩을 수행하는 단계와, 상대노드에서 이동라우터로 데이터 패킷 전송시, 상기 상대노드에 추가된 바인딩캐쉬 정보를 이용하여 라우팅 확장헤더를 첨가한 패킷을 이동라우터로 전송하는 단계와, 상기 전송된 라우팅 확장 헤더를 이동라우터에서 처리하여 이동노드로 데이터 패킷을 전송하는 단계와, 이동노드에서 이동라우터를 경유하여 상대노드로 직접 데이터 패킷을 전송하는 단계로 진행하여 최적의 루트를 제공함으로써, 망자원을 효율적으로 사용할 수 있으며, 데이터 패스가 짧아지므로 통신 성능이 향상된다. 이동노드, 이동라우터, 홈에이젼트, 엑세스라우터, 엑세스 포인트, 상대노드, 바인딩 업데이트, 바인딩 캐쉬, 바인딩 리스트
Abstract:
본 발명에 의한 라우터 이중화 장치는 접속중인 라우터로부터 연결정보를 수신한 후 이더넷 프레임을 출력하는 인터페이스부; 상기 이더넷 프레임으로부터 TCP 패킷을 해석한 후 재연결에 필요한 제1정보를 저장하고, 상기 제1정보를 이중화 장치로 송신하는 이중화처리부; 및 상기 라우팅작업을 수행하고 라우팅 정보를 상기 이중화 장치로 송신하는 라우팅부;를 포함하는 것을 특징으로 하며, 절체가 발생하더라도 허용 시간 내에 라우팅 프로토콜을 재실행함으로써 인접노드의 라우팅 프로토콜이 재실행 여부를 인식할 수 없게 되어 Standby 시스템으로 절체가 발생하더라도 라우팅 프로토콜 엔진에서 모든 루트 정보에 대한 갱신(refresh) 절차를 생략하게 되어 패킷 라우팅을 연속적으로 처리할 수 있는 효과를 가져오게 된다. 라우터, 이중화, BGP
Abstract:
본 발명은 인증된 가입자들 및 가입자별 인증된 채널에 대해서만 방송 스트림 데이터를 멀티캐스팅하는 IP 기반 방송 서비스 시스템에서의 방송 스트림 데이터 전송 방법에 관한 것이다. 이와 같은 본 발명은 방송 서버(11, 12)가 다수개의 방송 스트림 데이터를 L3 스위치(40)로 멀티캐스팅하는 제 10 단계(S10); 단말(60)의 전원이 켜지면, 사용자 인증처리를 수행한 후 IP를 할당하는 제 20 단계(S20); L2 및 L3 스위치(50, 40)에 가입자 프로파일 정보 데이터베이스를 구축하는 제 30 단계(S30); 방송 서버(11, 12)가 TV 포탈정보를 해당 단말(60)로 전송하는 제 40 단계(S40); 원하는 채널이 선택되면, 단말(60)이 그룹 가입 요청을 수행하는 제 50 단계(S50); 및 L3 스위치(40)가 인증된 사용자 및 채널이면 그룹에 가입시킨 후 방송 스트림 데이터를 전송하는 제 60 단계(S60)로 이루어진다. 본 발명에 따르면 방송 서비스의 유료화 및 차별화를 이룩하고, 망 전체의 대역폭을 감소시켜 효율적인 망 관리가 이뤄지도록 해주는 효과가 있다. 방송 서비스 시스템, IGMP 프로토콜, PIM-SM 프로토콜, 방송 서버,
Abstract:
PURPOSE: An MAC method of a PON(Passive Optical Network) and a system thereof are provided to set a threshold value to prevent a service quality deterioration caused by a bandwidth monopoly, thereby predicting a maximum polling period of an existing subscriber and preventing a long standby time of new polling registers. CONSTITUTION: Each ONT(Optical Network Termination) waits for a registration request frame(S401), transmits a polling group subscription frame to an OLT(Optical Line Terminator), and registers in a polling table(S402). Each ONT receives a frame from the OLT to compare the frame with a destination address, and abandons the frame if the frame does not have the identical address(S403-S405). If a self MAC address is identical with the destination address, each ONT checks a frame type(S406). If the received frame is a control frame, the ONT confirms whether the frame is a polling frame(S408). If so, the ONT first confirms whether a polling group secession request is received from the upper layer(S409). If so, the procedure is completed.
Abstract:
A method for adaptively partitioning a buffer in a shared buffer switch is provided. The buffer partitioning method for a shared buffer switch which has a plurality of input ports, a plurality of output ports, and a shared buffer, the method for determining whether or not to store a cell, which is newly received through one of the input ports, in the shared buffer comprises the steps of (a) determining a buffer area of the shared buffer in which the newly received cell is stored; (b) determining a cell discard threshold with respect to the total number of cells stored in the shared buffer and the changing rate, with respect to time, of the total number of the cells; and (c) determining whether or not to store the newly received cell in the shared buffer, by comparing the number of cells stored in the buffer area in which the newly received cell is to be stored, with the cell discard threshold. In the method, using a cell discard threshold which is determined with respect to the total number of cells stored in a shared buffer and the changing rate of the total number of cells, it is determined whether or not to store a newly received cell. Therefore, the shared buffer switch adaptively handles changes in inflowing traffic volume and changes in outflowing cell traffic volume such that cell loss due to cell discard is effectively prevented.
Abstract:
본 발명은 비동기 전송모드(Asynchronous Transfer Mode, ATM)교환기에서 고속의 데이터를 전송하기 위한 유효비트율(Available Bit Rate, ABR) 서비스를 수용할 경우의 대역 할당 방법에 관한 것으로서, 유효비트율(ABR) 서비스를 수용할 경우에 이동식 경계(Movable Boundary, MB) 방법을 사용하면 유효비트율 서비스의 특성으로 인해 이동식 경계 방법의 단점인 링크 이용률을 높이면서 우선순위에 따른 대역 할당이 이루어지나, 기존의 이동식 경계 방법은 문턱값이 고정되어 있으므로 입력 트래픽의 특성을 정확하게 예측하기 어려운 비동기 전송모드 망에서는 입력 트래픽의 요구 대역량이 변화함에 따라 우선순위에 의한 연결 수락을 보장하지 못하는 문제점이 발생하여, 이러한 문제점을 해결하기 위해서 본 발명에서는 기존의 이동식 경계 방법에서 문턱값을 입력 트래� ��의 요구 대역량 변화에 상관없이 우선순위에 따른 연결 수락을 보장하는 동적 이동식 경계방법을 대역 할당 방법으로 제공하는데 그 목적이 있으며, 우선순위에 따른 연결 수락 제어를 수행할 수 있고 요구된 서비스들 사이의 공평한 성능을 보장해 줄 수 있는 효과가 있다.
Abstract:
In the ATM switch, the broadband call attempting and releasing method use a narrow band ISDN terminal. This method transfers broadband data using an N-ISDN telephone or an N-ISDN personal computer. The method employs an ATM call control processor, a broadband call control block software and a narrow band call control block software. The broadband call control block software is composed of a broadband call processing main module, a broadband sending call processing module and a broadband receiving call processing module.
Abstract:
본 발명은 전송 링크를 각 서비스별 전용 대역과 각 서비스를 이 모두 사용할 수 있는 공용 대역으로 나누어 기존에 연결되어 있는 서비스들의 요구 품질을 유지시키면서 가능한한 많은 연결을 받아들여 전송 대역의 이용율을 최대화 시킬 수 있는 전송 대역 할당 및 관리 방법을 제공하는데 그 목적이 있으며, 비동기 전송 모드 망의 전송 링크를 각 서비스별 전용 대역과 각 서비스들이 모두 사용할 수있는 공용 대역으로 구분하는 제1단계와, 오프 라인(Off-line)에서 각 서비스별 전용 대역과 공용 대역을 사전에 할당하는 제2단계와, 할당된 전송 대역에 대해 온 라인(On-line)에서 서비스별로 대역 할당 요구를 받아 전용대역을 우선 할당하고 전용대역의 할당이 만료되면 공용대역으로 서비스 대역 할당을 수행하는 제3단계를 구비하여 수행하는 것을 특징 으로 한다.
Abstract:
The control method for ATM having the capability of transferring the identical video program when a subscriber requested the same video program while another subscriber is being serviced includes the first step deciding the calls from the subscribers whether the requested service is available or not and sending the rejection message when the requested service is not available; the second step giving the VCI(virtual Channel Identifier) when the requested service is one-to-one call; the third step requesting video service to the program provider and sending the connected message when the requested service is broadcasting call; the fourth step receiving the disconnecting calls from the subscribers; the fifth step requesting the disconnecting service to the program provider and sending the disconnecting message for the one-to-one call; the final step sending disconnecting message for the subscriber who wants to close the communication and disconnecting the switching channel for the broadcasting call.
Abstract:
본 발명은 비동기 전송모드 ATM(Asynchronus Transfer Mode)망의 가입자 정합주에서 망으로 유입되는 트래픽의 최대셀전송속도와 평균셀전송속도와 평균셀전송속도를 동시에 감시할 수 있는 사용 파라미터 제어장치 및 방법에 관한 것이다. 본명은, 임계값을 갖는 버퍼를 둠으로써 돌발적으로 과다하게 발생되어 망으로 유입되는 셀들을 조절할 수 있는 트래픽 쉐이핑(shaping)기능을 수행할 수 있으며 버퍼에 저장된 셀들은 임계값에 따라 버퍼를 읽어내는 속도를 가변시켜 망이 하용 가능한 범위내의 속도로 읽혀져 망으로 전달되도록 한다. 이에 따라 본 발명은, 위반 셀 표시기능도 함께 수행하여 망의 폭주 상태를 사전에 예방할 수 있는 효과가 있다.