Abstract:
PURPOSE: A method for dynamically allocating a bandwidth in a loop-back type WDM(Wavelength Division Multiplexed)-PON(Passive Optical Network) is provided to simplify a channel connection method between an OLT(Optical Line Terminal) and an ONT(Optical Network Unit/Terminal). CONSTITUTION: An OLT(210) continuously transmits a non-modulated optical signal to an ONT(220)(S305). If the ONT(220) desires new registration or initiates its operation(S310), The ONT(220) requests registration from the OLT(210). The OLT receives a registration request frame from the ONT(220) and determines an initial frame ratio of a transmission frame(S320). The OLT(210) informs the ONT(220) that registration has been made based on the initial frame ratio(S325). The ONT(220) requests band allocation from the OLT(210) based on the initial frame ratio(S330). A scheduler of the OLT(210) determines of a non-modulated bandwidth for uplink data to be transmitted next(S335). The ratio of uplink and downlink is transmitted to the ONT(220)(S340).
Abstract:
본 발명은 루프백 방식을 가진 파장 분할 다중화 수동형 광 가입자망에서의 동적 대역폭 할당 방법에 관한 것으로서, 각 광가입자 단말장치(ONT)가 자신이 현재 전송 대기버퍼 사이즈를 포함하는 대역 할당 요구 프레임을 광선로 종단장치(OLT)에 전송하는 제1 전송과정과, 상기 대역 할당 요구 프레임을 수신한 광선로 종단장치(OLT)가 상기 광가입자단말장치(ONT)의 전송 대기버퍼 사이즈에 의거하여 다음에 보낼 상향 대역폭과 하향 대역폭의 비율을 동적으로 조정하는 과정을 포함한다. 따라서, 루프백 방식을 가진 파장 분할 다중화 수동형 광 가입자망에 있어서 급격히 변하는 서비스 가입자 트래픽에 능동적으로 대처할수있는 장점이 있다. 파장분할 다중화, 수동형 광 가입자 망, 루프백 방식, 동적 대역폭 할당
Abstract:
PURPOSE: An MAC method of a PON(Passive Optical Network) and a system thereof are provided to set a threshold value to prevent a service quality deterioration caused by a bandwidth monopoly, thereby predicting a maximum polling period of an existing subscriber and preventing a long standby time of new polling registers. CONSTITUTION: Each ONT(Optical Network Termination) waits for a registration request frame(S401), transmits a polling group subscription frame to an OLT(Optical Line Terminator), and registers in a polling table(S402). Each ONT receives a frame from the OLT to compare the frame with a destination address, and abandons the frame if the frame does not have the identical address(S403-S405). If a self MAC address is identical with the destination address, each ONT checks a frame type(S406). If the received frame is a control frame, the ONT confirms whether the frame is a polling frame(S408). If so, the ONT first confirms whether a polling group secession request is received from the upper layer(S409). If so, the procedure is completed.
Abstract:
본 발명은 수동형 광 가입자망의 폴링 기반의 매체 접근 제어 시스템 및 방법에 관한 것이다. a) 상기 OLT로부터의 등록 요청 프레임인 광고 프레임 (Advertise Frame) 수신하여 상기 OLT로 폴링 그룹 가입 프레임(Registration Frame)을 전송하고 폴링 테이블에 등록하여 프레임 수신을 기다리는 단계; b) 상기 OLT로부터 프레임을 수신하고 상기 프레임 타입을 판단하는 단계; c) 상기 판단된 프레임 타입이 데이터 프레임이면 상위 계층으로 프레임을 전송하고 상기 a) 단계로 되돌아가서 프레임 수신을 기다리는 단계; d) 상기 판단된 프레임 타입이 제어 프레임이면 폴링 프레임인지를 확인하는 단계; e) 상기 확인 결과, 상기 제어 프레임이 폴링 프레임이면 상위 계층으로부터의 폴링 그룹 탈퇴 요청이 있는지를 확인하는 단계; 및 f) 상기 확인 결과, 폴링 그룹 탈퇴 요청이 없으면 한번의 폴링주기 동안 전송 가능한 소정의 임계치 이하의 데이터 프레임을 상기 OLT로 전송하고 전송 종료를 알리는 단계를 포함한다. 본 발명에 따르면 ONT에서 전송 가능한 데이터 프레임의 임계치를 설정함으로써 소수 가입자의 대역폭 독점에 따른 서비스 품질 저하를 방지하고, 소수의 가입자에 의한 채널 독점을 사전에 방지함으로써 기존 가입자의 최대 폴링 주기가 예측 가능하며 신규 폴링 등록자의 긴 대기시간 발생을 막을 수 있다.