Abstract:
본 발명은 수소 제조용 광촉매 및 그 제조방법, 그리고 이를 이용한 수소의 제조방법에 관한 것으로, 본 발명의 광촉매는 하기의 화학식 4를 가지는 것을 특징으로 하며, [화학식 4] Pt(x)/Zn[M(y)]S (앞의 식에서 x는 Pt의 중량 백분율을 나타내는 것으로 0.05~2.50의 값을 가지며, M은 조촉매로 V, Cr, Mo, Mn, Re, Fe, Ru, Os, Co, Rh, Ir, Ni, Cu, Al, Ga, p 중 선택된 1종 이상이고, y 는 M/(M+Zn)의 몰%를 나타내는 것으로 0.01~20.00의 값을 갖는다.) 본 발명의 제조방법은 상기 M/(M+Zn)의 몰%가 0.01~20이 되도록 Zn 및 M 함유 화합물을 물에 가한 후, 여기에 반응물로 H 2 S 또는 Na 2 S 중 선택된 1종을 가하고 저어서 Zn[M]S 침전물을 얻고, pH가 7을 유지할 때까지 이 침전물을 물로 세척하고 얻어진 세척된 침전물을 질소(기류)분위기에서 진공 건조시킨 후, 이 Zn[M]S 침전물에다 액상의 Pt 함유 화합물을 Pt 함유량이 0.05~2.50 중량%가 되도록 가하고 질소분위기에서 자외광을 조사하여 Zn[N]S 상에 Pt가 고착되도록 처리한 다음, 이를 다시 pH가 7이 될 때까지 세척한 후 진공건조시킨 다음, 280~420℃에서 1~3시간 동안 산화소성하고, 280~420℃에서 1~3시간 동안 환원소성 시키는 것을 특징으로 한다.
Abstract:
PURPOSE: A cation-added zinc cadmium sulfide photocatalyst for generating hydrogen, a preparation method thereof and a hydrogen preparing method using it are provided to utilize wide range of light source and improve catalyst life and activity by utilizing advantages of CdS and ZnS catalysts. CONSTITUTION: The CdZnMS photocatalyst for generating hydrogen is expressed by Formula VII{m(a)CdxZnyMzS}. In Formula VII, m represents a metal doped as electron acceptor, which is selected from Ni, Pt, Ru or their oxides; a is weight percentage of m, which is in the range of 0.10-5.00; M is a metal selected from Mo, V, Al, Cs, Mn, Fe, Pd, Pt, P, Cu, Ag, Ir, Sb, Ga and Re; and z is atomic percentage of M/(Cd+Zn+M), which is in the range of 0.05-20.00.
Abstract:
본 발명은 광반응에 의하여 물로부터 수소를 발생시키는 수소발생용 반응기에 관한 것이다. 본 발명은 배취식(Batch type) 공정과는 달리 수소가스를 연속으로 발생될 수 있도록 함으로써 양산체제에 적합한 반응기를 제공하기 위한 것이다. 본 발명은 물에 하기 일반식 I의 광촉매 분말과 전자공여체로 Na 2 S가 0.15 - 0.40몰, 환원제로 NaH 2 PO 2 가 0.2 - 0.5몰이 투입되고, 석영관을 통하여 광이 반응조 내부에 도입되도록 하여 광에 의한 촉매반응과 교반수단에 의한 교반으로 물로부터 수소를 연속발생시킬 수 있도록 한 것이다. Pt(a)/Zn[M(b)]S ---I (위 일반식에서 a는 광촉매 중의 Pt의 중량백분율을 나타내고 0.1 - 3.5의 값을 가지며, M은 Co, Fe, Ni, P 중 선택된 1종의 원소이고, b는 M/Zn의 몰%를 나타내는 것으로 0.05 - 30의 값을 가진다.)
Abstract:
PURPOSE: A photocatalyst for generating hydrogen is provided to activate the photo catalyst in a sunbeam area as well as in a visible ray area, to increase generating amount of hydrogen and to make the life span of the catalyst semi-permanent. CONSTITUTION: A photo catalyst is indicated as a chemical formula, m(A)/Cd(M(B))S. A method for producing the photo catalyst is composed of the steps of: dissolving a compound containing Cd and M to make mole % of M 0.05 to 20.00; stirring the dissolved compound after giving the compound H2S or Na2S as a reactor to gain a Cd£M|S deposit; cleansing the deposit with water until pH keeps 7; drying the cleansed deposit in a vacuum under a nitrogen atmosphere, and doping the deposit by giving the deposit liquid compound containing m to be 0/10 to 2.50wt% of m content. The m stands for doped metal.
Abstract:
PURPOSE: A photo catalyst having a semi-eternal life span is provided to activate a catalyst in a visible ray area regulated with a photo filter and to improve the amount of generating hydrogen. CONSTITUTION: In an equation of Pt(x)Zn/£M(y)|S, x shows a weight percentage of Pt and has a 0.05 to 2.50 value, and M is an element metal selected among V, Cr, Mo, Mn, Re, Fe, Ru, Os, Rh, Ir, Ni, Cu, Al, Ga and P. In addition, y shows a mole % of M/(M+Zn) and has a 0.01 to 20.00 value. Herein, a compound containing Zn and M is dissolved in water so M as to be 0.01 to 20, and H2S or Na2S is given in the compound to obtain a Zn(M)S deposit. Then, the deposit is washed with water until pH becomes 7, and the washed deposit is dried. The Pt compound of a liquid phase is given in the dried Zn(M)S deposit so the Pt content as to be 0.05 to 2.50 wt%, and an ultra violet photo is injected to dope Pt on Zn£M|S in a nitrogen atmosphere. Then, it is washed and dried again until pH becomes 7, oxidation-calcined at 280 to 420°C for 1 to 3 hours and reduction-calcined at 280 to 420°C for 1 to 3 hours.
Abstract:
PURPOSE: A hydrogen generator is provided, which produces hydrogen by the continuous process and minimize management cost by automation of process CONSTITUTION: A reactor(1) comprises i) an input pipe(5) that input a photocatalyst of formula 1(Ni(a)Cd£M(b)|S, wherein, a is 0.1-5.00wt%(based on the photocatalyst) of Ni, M is one atom selected from V, Cr, Al, P, As, Sb and Pb, and b is 0.001-20.00mole% of M/(M+Cd)), an electron donator(Na2S), a reductant(Na2SO3 or NaH2PO2) and the purified water; ii) a hydrogen exhaust pipe(7); iii) a vacuum pump(3) that remove air of initial state being impurity; iv) a compressor; and then v) a scattered reflection glass cover(2) that cover the upside of the reactor(1) and have a thickness of 3-5mm.
Abstract translation:目的:提供氢发生器,其通过连续过程产生氢气并通过自动化过程使管理成本最小化。结构:反应器(1)包括:i)输入管道(5),其输入式1的光催化剂(Ni )Cd(磅); M(b)| S,其中,a为Ni的0.1-5.00wt%(基于光催化剂),M为选自V,Cr,Al,P,As,Sb和Pb的一种原子,b (M + Cd)的0.001-20.00摩尔%),电子给体(Na 2 S),还原剂(Na 2 SO 3或NaH 2 PO 2)和纯净水; ii)氢气排气管(7); iii)真空泵(3),其将初始状态的空气排除为杂质; iv)压缩机; 然后v)覆盖反应器(1)上部并具有3-5mm厚度的散射反射玻璃盖(2)。
Abstract:
본 발명은 광반응에 의하여 물로부터 수소를 발생시키는 수소발생용 반응기에 관한 것이다. 본 발명은 배취식(Batch type) 공정과는 달리 수소가스를 연속으로 발생될 수 있도록 함으로써 양산체제에 적합한 반응기를 제공하기 위한 것이다. 본 발명은 물에 전자공여체로 Na 2 S가 0.15-0.40몰, 환원제로 NaH 2 PO 2 가 0.2-0.5몰이 투입되고, 석영관을 통하여 광이 반응조 내부에 도입되도록 하여 광에 의한 촉매반응과 교반수단에 의한 교반으로 물로부터 수소를 연속발생시킬 수 있도록 하되, 석영관의 외부에 내부가 하기 일반식 1의 광촉매로 피복되도록한 유리튜브가 배치된 것을 특징으로 한다.
(위 일반식에서 a는 광촉매 중의 Pt의 중량백분율 나타내고 0.1-3.5의 값을 가지며, M은 Co, Fe, Ni, P 중 선택된 1종의 원소이고, b는 M/Zn의 몰
Abstract:
본 발명은 광반응에 의하여 물로부터 수소를 발생시키는 수소발생용 반응기에 관한 것이다. 본 발명은 배취식(Batch type) 공정과는 달리 수소가스를 연속으로 발생될 수 있도록 함으로써 양산체제에 적합한 반응기를 제공하기 위한 것이다. 본 발명은 물에 전자공여체로 Na 2 S가 0.15 - 0.40몰, 환원제로 NaH 2 PO 2 가 0.2 - 0.5몰이 투입되고, 석영관을 통하여 광이 반응조 내부에 도입되도록 하여 광에 의한 촉매반응과 교반수단에 의한 교반으로 물로부터 수소를 연속발생시킬 수 있도록 하되, 석영관의 외부에 내부가 하기 일반식 l의 광촉매로 피복되도록한 유리튜브가 배치된 것을 특징으로 한다. Pt(a)/Zn[M(b)]S ---l (위 일반식에서 a는 광촉매 중의 Pt의 중량백분율을 나타내고 0.1 - 3.5의 값을 가지며, M은 Co, Fe, Ni, P 중 선택된 1종의 원소이고, b는 M/Zn의 몰%를 나타내는 것으로 0.05 - 30의 값을 가진다.)
Abstract:
PURPOSE: A hydrogen generator is provided, which produces hydrogen by the continuous process and minimize management cost by automation of process CONSTITUTION: A reactor(1) comprises i) an input pipe(5) that input a photocatalyst of formula 1(Ni(a)Cd£M(b)|S, wherein, a is 0.1-5.00wt%(based on the photocatalyst) of Ni, M is one atom selected from V, Cr, Al, P, As, Sb and Pb, and b is 0.001-20.00mole% of M/(M+Cd)), an electron donator(Na2S), a reductant(Na2SO3 or NaH2PO2) and the purified water; ii) a hydrogen exhaust pipe(7); iii) a vacuum pump(3) that remove air of initial state being impurity; iv) a compressor; and then v) a scattered reflection glass cover(2) that cover the upside of the reactor(1) and have a thickness of 3-5mm.
Abstract translation:目的:提供氢气发生器,其通过连续过程产生氢气并通过过程自动化来最小化管理成本构成:反应器(1)包括i)输入管道(5),其输入式1的光催化剂(Ni(a )Cd£M(b)| S,其中a为Ni为0.1-5.00wt%(基于光催化剂),M为选自V,Cr,Al,P,As,Sb和Pb中的一个原子,b为 M /(M + Cd)的0.001-20.00摩尔%),电子给体(Na 2 S),还原剂(Na 2 SO 3或NaH 2 PO 2)和纯化水; ii)氢气排气管(7); iii)除去作为杂质的初始状态的空气的真空泵(3) iv)压缩机; 然后v)覆盖反应器(1)的上侧并具有3-5mm厚度的散射反射玻璃盖(2)。