Abstract:
Methods and systems are provided for Internet protocol low noise block downconverters (IP LNBs) supporting positioning. An IP LNB that is within a satellite reception assembly may determine based on signals received from at least two different sources, location information and corresponding time information for the IP LNB; and may communicate the determined location information and the corresponding time information to a wireless communication device communicatively coupled to the IP LNB. The location information may be configured to enable the wireless communication device to determine its location based on the determined location information and the corresponding time information. The IP LNB may receive the location information of the wireless communication device from that device. The IP LNB may adaptively provide services based on one or more of: its determined location information, the corresponding time information, and the location information of the wireless communication device.
Abstract:
Aspects of a method and apparatus for band separation for multiband communication systems are provided. One or more circuits for use in a transceiver may comprise a triplexer and a leakage processing module. The triplexer may comprise a first port, a Multimedia Over Coaxial Alliance (MoCA) port, a television upstream port, and a television downstream port. The leakage processing module may comprise a television downstream input port, a cable television downstream output port, a MoCA port, and a cable television upstream port. The leakage processing module may be operable to (1) process a MoCA signal to generate a first compensation signal; (2) process a cable upstream signal to generate a second compensation signal; (3) process a filtered signal based at least in part on the first and second compensation signals; and (4) output the processed filtered signal via the cable television downstream output port of said leakage processing module.
Abstract:
Methods and apparatus for processing multichannel signals in a multichannel receiver are described. In one implementation, a plurality of demodulator circuits may provide a plurality of outputs to a processing module, with the processing module then simultaneously estimating noise characteristics based on the plurality of outputs and generating a common noise estimate based on the plurality of outputs. This common noise estimate may then be provided back the demodulators and used to adjust the demodulation of signals in the plurality of demodulators to improve phase noise performance.
Abstract:
Methods and systems for optimizing bandwidth utilization in an in-home network may comprise in a multi-protocol premises-based wired and wireless network, monitoring capabilities of media of a wired communication link operating in accordance with a wired communication standard and capabilities of a wireless communication link operating in accordance with a wireless local area network standard. Some or all data communications from the wired communication link may be routed to the wireless communication link based on the media capabilities. Bit-loading of the data communications in the wired communication link and wireless communication link may be configured based on the media capabilities. The capabilities may comprise one or more of: bandwidth, data throughput, usage, and signal-to-noise ratio. The wired communication standard may comprise Multimedia over Cable Alliance (MoCA). The monitoring may be performed by one or more Multimedia over Cable Alliance (MoCA) network controllers.
Abstract:
A network device may receive a signal from a headend, wherein a bandwidth of the received signal spans from a low frequency to a high frequency and encompasses a plurality of sub-bands. The network device may determine, based on communication with the headend, whether one of more of the sub-bands residing above a threshold frequency are available for carrying downstream data from the headend to the circuitry. The network device may digitize the signal using an ADC operating at a sampling frequency. The sampling frequency may be configured based on a result of the determining. When the sub-band(s) are available for carrying downstream data from the headend to the network device, the sampling frequency may be set to a relatively high frequency. When the sub-band(s) are not available for carrying downstream data from the headend to the network device, the sampling frequency may be set to a relatively low frequency.
Abstract:
A cable modem termination system (CMTS) may communicate with a plurality of cable modems using a plurality of orthogonal frequency division multiplexed (OFDM) subcarriers. The CMTS may determine a performance metric of each of the cable modems. For each of the OFDM subcarriers and each of the cable modems, the CMTS may select physical layer parameters to be used for communication with that cable modem on that OFDM subcarrier based on a performance metric of that cable modem. The parameters may be selected for each individual modem and/or each individual subcarrier, or may be selected for groups of modems and/or groups of subcarriers. The parameters may include, for example, one or more of: transmit power, receive sensitivity, timeslot duration, modulation type, modulation order, forward error correction (FEC) type, and FEC code rate.
Abstract:
A coupling device for use in a hybrid fiber coaxial (HFC) network may be configured to detect a control message and determine from the message a period for which a cable modem downstream is to be transmitting a desired transmission, disable an upstream path through it when there is only noise incident on the upstream path, and enable the upstream path during the period when a desired transmission from a cable modem downstream of the coupling device is incident on the upstream path. The coupling device may be a trunk amplifier, a distribution amplifier, or a splitter. The coupling device may comprise a single upstream interface coupled to a plurality of downstream interfaces. The enabling and/or disabling may be in response to a signal strength indicated by the SSI being below a threshold.
Abstract:
A cable modem termination system (CMTS) may communicate with a plurality of cable modems using a plurality of orthogonal frequency division multiplexed (OFDM) subcarriers. The CMTS may determine a performance metric of each of the cable modems. For each of the OFDM subcarriers and each of the cable modems, the CMTS may select physical layer parameters to be used for communication with that cable modem on that OFDM subcarrier based on a performance metric of that cable modem. The parameters may be selected for each individual modem and/or each individual subcarrier, or may be selected for groups of modems and/or groups of subcarriers. The parameters may include, for example, one or more of: transmit power, receive sensitivity, timeslot duration, modulation type, modulation order, forward error correction (FEC) type, and FEC code rate.
Abstract:
A method and apparatus for memory power and/or area reduction. An array of memory cells may be scanned to detect faulty memory cells, if any, in the array. A supply voltage Vmem applied to the array of memory cells may be controlled based on a result of the scan, and based on a sensitivity coefficient of one, or more, of the array of memory cells. The sensitivity coefficient may indicate an impact that the one, or more, of the array of memory cells being faulty may have on the performance of a device that reads and writes data to the memory array. Additionally or alternatively, the physical dimensions of the memory cells may be determined based on the sensitivity coefficient(s) and/or based on a number of faulty memory cells that can be tolerated in the array of memory cells.
Abstract:
A first network device may discover one or more values of one or more parameters corresponding to a plurality of links and/or devices of the network. The first network device may compare the discovered one or more values of the one or more parameters to an expected one or more values of the one or more parameters. The first network device may determine whether to transmit data onto a network path between the first device and one of the plurality of devices based on a result of the comparison, wherein at least one of the plurality of links and/or devices are not part of the network path. The first network device may be operable to utilize the discovered parameter values to generate a security key which may be utilized to encrypt and/or scramble content prior to transmitting the content onto the network.