Abstract:
미세조류를 배양하기 위한 광생물 반응기는 미세조류를 포함하는 배양액을 배양하기 위한 배양공간의 용량을 선택적으로 변경 가능한 가변용량부, 가변용량부의 일단을 마감하는 제1공용마감부, 및 가변용량부의 타단을 마감하는 제2공용마감부를 포함하고, 제1공용마감부 및 제2공용마감부는 가변용량부에 선택적으로 조립 가능하게 제공된다.
Abstract:
방향성을 갖는 흡판을 이용한 이동장치는 메인 몸체; 지지면에 부착된 상태에서, 진행 방향에 대한 저항이 후퇴 방향에 대한 저항보다 작으며, 메인 몸체에 직선왕복 운동 가능하게 장착되는 이동 흡판; 및 지지면에 부착된 상태에서, 진행 방향에 대한 저항이 후퇴 방향에 대한 저항보다 작으며, 메인 몸체에 고정되어 장착되는 고정 흡판을 포함한다. 이때, 이동 흡판 및 고정 흡판은 각각 진행 방향에 대한 저항이 후퇴 방향에 대한 저항보다 작기 때문에, 이동 흡판이 진행 방향으로 이동하면, 메인 몸체는 최초 위치에 그대로 위치하며, 이동 흡판이 후퇴 방향으로 이동하면, 메인 몸체는 이동 흡판의 이동에 따라서 진행 방향으로 진행할 수 있다.
Abstract:
A piezoelectric element and a piezoelectric actuator using the same are provided to perform an accurate position control by enlarging the displacement of the piezoelectric actuator. A piezoelectric element(23) of a linear cantilever type vibrates independently in a bending direction and a lengthwise direction when an electrical signal is inputted. A first displacement enlargement device is fixedly arranged on a first surface of the piezoelectric element and respectively arranged on left/right nodes where a phase of a vibration mode is equalized. A second displacement enlargement device is fixedly arranged on a second surface opposite to the first surface of the piezoelectric element. A first fixing plate(31) is fixedly connected to the first displacement enlargement device and supplies a pre-load to the first displacement enlargement. A second fixing plate(33) is fixedly connected to the second displacement enlargement device and supplies the pre-load to the second displacement enlargement device. The piezoelectric element is generated by a current of a frequency with two same resonance modes.