Abstract:
본 발명은, 서로 다른 파장을 갖는 복수개의 광신호가 하나의 광 파이버를 통해 전송되는 광 전송 시스템에 있어서, 상기 광 파이버를 통해 전송된 복수개의 신호중 하나의 파장을 기준으로 파장 분산을 보상하는 제1 분산 보상기와, 상기 제1 분산 보상기에 연결되어 상기 제1 분산 보상기에서 출력되는 신호를 파장에 따라 각각 다른 채널로 분파하여 출력하는 디먹스, 및 상기 디먹스에서 분파된 채널 각각에 연결되어, 출력되는 서로 다른 파장 광신호 각각의 파장분산을 보상하는 복수개의 제2 분산 보상기를 포함하는 광 전송 시스템을 제공할 수 있다. 광전송(optical transmission), 분산보상(dispersion compensation), 분파기(demux)
Abstract:
PURPOSE: A passive optical network providing connection management server of a packet transmission layer method based on an ethernet is provided to operate PTL(Packet Transport Layer) between an ONU(Optical Network Unit) and an ONT(Optical Network Terminal)(130) by applying PLT method technology to the end of the ONU/ONT. CONSTITUTION: A connection management server(110) establishes channels(C1~C3) and a channel group(10). The connection management server manages the connection state of all sections. A PTL connection is established between the ONU/ONT of a subscriber end and the ONU/ONT of other subscriber end. A PTL-PON(Passive Optical Network) method is applied to a PON section located between OLT(Optical Line Terminal)(120) and the ONU/ONT.
Abstract:
A PDT(Power Durability Testing) system and a method of a SAW(Surface Acoustic Wave) filter are provided to reliably estimate the life time of RF(Radio Frequency) passive parts like the SAW filter and a duplexer by using a reliability testing system capable of controlling test temperature with an RTD(Resistance Temperature Detector) sensor. A PDT system of a SAW filter(161) is composed of a signal generating unit(111) generating a continuous wave of an oscillator; a high-power amplifying unit(112) amplifying a signal applied from the signal generating unit, at the power level to be measured; a PDT unit(120) monitoring power applied to the SAW filter by receiving the signal amplified in the high-power amplifying unit and setting a path to monitor the electrical characteristic with a network analyzer(140); a power measuring unit measuring a signal output from the PDT unit; a control unit changing the path to monitor the electrical characteristic of the PDT unit; a network analysis unit analyzing the electrical characteristic of the SAW filter; a reliability testing unit(160) applying predetermined test temperature to the SAW filter and maintaining the applied temperature; a temperature measuring unit(180) measuring the temperature of the SAW filter; a temperature control unit(190) controlling the test temperature applied to the reliability testing unit; and a computing unit(170) controlling the signal generating unit, the power measuring unit, the network analysis unit, the control unit, the temperature control unit, and the temperature measuring unit.
Abstract:
무결성 채널 전달을 위한 이더넷 오버 SDH 장치가 개시된다. 트랜시버는 SDH 데이터에서 클럭을 재생하고 재생한 클럭에 맞도록 SDH 데이터를 복구한다. EoS 프레이머는 SDH 데이터를 이더넷 데이터로 변환한다. EoS 채널 처리부는 이더넷 데이터를 채널별 이더넷 패킷으로 분리하고 채널별 이더넷 패킷에 포트번호를 포함하는 태그를 첨부한 후 채널별 이더넷 패킷을 집합하여 단일 채널로 출력한다. 이로써, QoS를 보장하고, 실시간 멀티미디어 및 L2 가상전용회선 서비스를 주요 서비스로 하는 무결성 채널 전달 방법을 제공한다. 이더넷 오버 SDH, 포트번호, 단일채널, 이더넷 패킷
Abstract:
본 발명은 고속의 상향 버스트 데이터의 중앙에 클럭 신호가 위치하도록 상기 데이터를 디지털 방식으로 위상 정렬하고, 여러 슬레이브 광원으로부터 전송되어 오는 신호에 대한 서브 비트 / 비트 편차 값을 구하여 서브 비트의 오차 값으로 각 슬레이브의 위치를 측정할 수 있는 장치를 제공하기 위한 것으로, 이를 위해 본 발명은 수동 광 네트워크의 슬레이브 광원으로부터 수신되는 고속의 버스트 수신 데이터를 입력받아 마스터 동기 클럭에 응답하여 상기 버스트 수신 데이터의 위상을 정렬하여 바이트 동기시켜 출력하고, 슬레이브 광원의 위치를 측정하기 위한 장치에 있어서, 상기 고속의 버스트 수신 데이터를 입력받아 다단 지연하기 위한 지연버퍼링수단; 기준동기신호에 응답하여 거리측정명령으로부터 위상검출시작신호를 생성하여 출력하기 위한 제어신호처리수단; 상기 마스터 동기 클럭, 상기 위상검출시작신호 및 제어 프로세서 정합부로부터 임의의 비트수 이상으로 '1' 및 '0'이 교번하는 프리앰블 신호에 응답된 프리앰블 길이 정보에 응답하여 상기 지연버퍼링수단으로부터 출력되는 지연 데이터의 위상을 정렬시키기 위한 위상정렬수단; 상기 위상정렬수단으로부터 출력되는 신호를 상기 마스터 동기 클럭에 응답하여 분주하기 위한 분주수단; 상기 버스트 수신 데이터의 경계부 신호 및 상기 분주수단으로부터 수신된 신호간의 바이트 동기를 수행하기 위한 바이트동기수단; 데이터 읽기 클럭 신호에 응답하여 상기 바이트동기수단에서 출력되는 바이트 동기된 신호로부터 바이트 단위로 동기되며, 위상 정렬된 버스트 수신 데이터를 최종적으로 추출하기 위한 데이터 추출수단; 상기 위상정렬수단으로부터 출력되는 위상검출신호 및 상기 바이트동기수단으로부터 출력되는 비트검출신호에 응답하여 사용자가 원하는 데이터 포맷으로 인코딩한 거리측정정보를 출력하기 위한 거리측정데이터인코딩수단; 및 상기 버스트 수신 데이터가 수신되지 않았을 때, 상기 위상정렬수단으로부터 출력되는 신호손실경보신호 및 상기 바이트동기수단으로부터 출력되는 바이트동기실패경보신호에 응답하여 경보신호를 생성하고, 상기 바이트동기수단으로부터 출력되는 정상위치여부판단신호에 응답하여 상기 경보신호를 생성하기 위한 경보신호발생수단을 포함한다. 수동 광 네트워크, 슬레이브 광원, 고속의 버스트 수신 데이터, 광 수신기, 지연버퍼부, 위상정렬부, 1:8분주기, 바이트동기부, ATM 셀 추출부, 거리측정데이터인코딩부, 경보신호발생부
Abstract:
PURPOSE: A local line termination device on an ODN(Optical Distribution Network) of ATM is provided to offer an integrated services digital network(IDSN) service as a basic service using an optical cable of one stripe per subscriber and offer video and distribution services. CONSTITUTION: A downstream frame processing part(1) receives ATM cells of a byte or word unit from an external ATM layer processor through a universal test and operations physical interface for ATM(UTOPIA), codes the received ATM cells, and performs a downstream frame insertion function, a bit interleaved parity-8 calculating and inserting function, a scrambling function, a header error control calculating and inserting function, and a parallel-to-serial conversion function. An optical transmitter(2) performs an electric-to-optical conversion operation with regard to serial frame data to output the converted value as a 155.520Mbps or 622.620Mbps optical signal. A controller(3) generates control signals required by downstream and upstream frame processing parts(1,7). A timing generator(4) receives a system clock to generate timing signals needed by each block. A microprocessor(5) performs a media access control protocol. A burst-mode optical receiver(6) restores received data by performing an optical-to-electric conversion operation with regard to an upstream 155Mbps optical signal and extracting a clock signal. A wavelength division multiplexing unit(8) multiplexes a downstream optical signal having 1550mm wavelength and an upstream optical signal having 1310mm wavelength so that the downstream optical signal is transferred to an optical distributor network and the upstream optical signal is transferred to the burst-mode optical receiver(6).
Abstract:
PURPOSE: A device for arranging phases of high burst data received from slave light sources of a passive optical network and for measuring locations of the slave light sources is provided to arrange the phases as a digital method, and to acquire sub bit/bit deviation values for signals transmitted from slave light sources. CONSTITUTION: A delay buffering unit(301) receives high burst receiving data, and performs a multi-step delay. A control signal processor(306) responds to a reference synchronous signal, and generates a phase detection start signal for outputting. A phase arranger(302) responds to preamble length information responded to preamble signals which '1' and '0' are alternated over an optional bit number, and arranges phases of delay data. A divider(303) divides the signals outputted from the phase arranger(302) in respond to a master synchronous clock. A byte synchronous unit(304) performs a byte synchronization between a boundary unit signal of the burst receiving data and the signals received from the divider(303). A data extractor(305) is synchronized from the signals outputted through the byte synchronous unit(304) as a byte unit in respond to a data reading clock signal, and extracts phase-arranged burst receiving data. A distance measuring data encoder(307) responds to a phase detection signal and bit detection signal, and outputs distance measuring information. An alarm signal generator(308) responds to a signal loss alarm signal and a byte synchronous fail alarm signal, and generates an alarm signal. The alarm signal generator(308) responds to a normal location deciding signal, and generates an alarm signal.
Abstract:
PURPOSE: A device for preventing a wrong operation in UTOPIA(Universal Test & Operations Physical Interface for ATM(Asynchronous Transfer Mode)) is provided to prevent abnormality generated by connection noise or the change of a signal level, so that a wrong operation in an ATM or a physical layer device can be prevented. CONSTITUTION: A polling sequence setup unit(36) stored address information of physical layer devices. An ADDR selection counter(34) outputs a predetermined cycle of counting signal for sequentially selecting the stored addresses. If a CLAV signal in an active state is transmitted from a physical layer device, the ADDR selection counter(34) outputs a corresponding ADDR selection signal and an ENABLE generating signal to the physical layer device. An ADDR selector(35) selects the counting signal and a corresponding stored in the polling sequence setup unit(34), for outputting to the physical layer device. An effective cell decider(31) decides whether an ATM cell transmitted from the physical layer device is effective. An ATM cell counter(32) counts an ATM cell period transmitted from the physical layer device, to output an ATM cell receiving completion signal. An ENABLE signal generator(33) receives the ENABLE generating signal, the effective ATM cell deciding signal and the ATM cell receiving completion signal, to generate an ENABLE signal, for outputting to the physical layer device.
Abstract:
PURPOSE: A device for processing an ONU(Optical Network Unit) of an ATM-PON(Asynchronous Transfer Mode-Passive Optical Network) system is provided to add the QoS(Quality of Service) buffering function, a real-time OAM(Operation And Management) processing function by hardware, and a UPC(Usage Parameter Control) function, for 622Mbps traffic. CONSTITUTION: An ODN(Optical Distribution Network) interface unit(100) performs a physical layer function requested for connection of an ONU(Optical Network Unit) to the ODN. An ATM(Asynchronous Transfer Mode) processing unit(200) transceives ATM cells with the ODN interface unit(100), and performs the QoS(Quality of Service) buffering function according to header conversion for bidirectional ATM cells, routing and service grades by connections, a real-time OAM(Operation And Management) processing function, and a UPC(Usage Parameter Control) function. An AAL-1(ATM Adaptation Layer-1) processing unit(300) transceives ATM cells with the ATM processing unit(200), and performs AAL-1 processing functions, such as a segmentation and reassembly function for subscriber lines, a pointer processing and generating function, an ATM cell processing and generating function, and an SRTS(Synchronous Residual Time Stamp) clock restoration and CDV support function. A processor connection unit(400) controls an operation mode, reads an operation state, inserts an OAM cell in bidirectional, extracts an OAM cell to external, and reads/writes upward/downward connection memory of external for connection setup and release.
Abstract:
1. 청구범위에 기재된 발명이 속한 기술분야 본 발명은 분기 결합형 모듈화 구조의 파장 분할 다중 광전송 장치에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 종속신호로서 STM-64 신호 입출력을 장치내에 수용하고, 분기결합 기능을 접속하고 이를 구현하고, 광부품의 손실의 극복을 가능하게 하고, 분기결합형과 단국형간의 융통성있는 기능 구성을 가질수 있도록 하는 장치를 제공하고자 함. 3. 발명의 해결방법의 요지 본 발명은 접속되는 종속 신호를 분기하여 외부로 전달하고, 결합하며, 통과시키는 광 스위칭 수단과, 입력 신호를 역 다중화하여 상기 광 스위칭 수단에 제공하고, 상기 광 스위칭 수단에서 결합 또는 통과하여 제공되는 신호를 다중화 하는 파장 분할 다중 분기형 광 전송 수단, 및 외부로부터 입력되는 신호를 상기 파장 분할 다중 단국형 광 전송 수단에 제공하고, 상기 파장 분할 다중 단국형 광 전송 수단으로부터 제공되는 신호를 외부 링크로 전달 하는 광 중계 수단을 포함한다. 4. 발명의 중요한 용도 본 발명은 파장 분할 다중 광 전송 장치에 이용됨.