Abstract:
A signal transmitting method and a signal receiving method are provided to increase a yield of a random access channel by restricting the access to the random access channel depending on the availability of the random access channel and reduce a data transmission delay by simplifying a bandwidth allocation process. A base station(10) broadcasts a field of a high speed RAC signal as 0 for an available random access channel. A mobile station(20) selects a random access preamble code corresponding to a requested length and MCS(Modulation Coding Scheme) level among random access preamble code set, and chooses one of the random access channels which has a field of a high speed RAC signal as 0. The mobile station transmits the selected preamble code and a random access message to the base station. If the base station is unable to receive the random access preamble code and the random access message, the base station broadcasts as a field of a high speed RAC signal as 0 without a random access response of a random access channel. When the mobile station receives the field of a high speed RAC signal as 0, performs a bandwidth request ranging procedure to transmit data or selects another random access channel to retransmit a random access data.
Abstract:
A sleep mode management device in a broadband wireless access system and a method thereof are provided to maintain a sleep mode of a terminal without additional power in the broadband wireless access system, thereby increasing power-saving effect of the terminal. A memory(260) stores sleep mode define parameters classified by power-saving rank within a terminal. A sleep mode manager(240) calculates available sections of the terminal according to the stored sleep mode define parameters, and outputs the calculated available sections. The available sections mean sections where more than one of power-saving ranks within the terminal enters a listening interval. A traffic transmission manager(270) transmits downlink data to the terminal according to the available sections inputted from the sleep mode manager.
Abstract:
A handover method of a mobile terminal in a mobile communication system, and a base station and the mobile terminal therefor are provided to enable the terminal and a serving base station to share lists of handover-available neighboring base stations, thereby reducing delay time requested for performance of handover in a high-speed mobile environment even by exchanging a simplified control message. A handover activation base station set setup message generator(210) generates an active base station set setup message indicating alterations of active base station sets to other base stations added to or deleted from a handover management device. An active base station information message generator(220) generates an active base station information message including handover acceptance information indicating whether the base stations receiving the active base station set setup message are able to accept handover of a mobile terminal.
Abstract:
A method and an apparatus for broadcasting a higher-layer protocol message in a wireless portable internet system are provided to increase wireless efficiency by reducing the number of total transmissions by including the higher-layer protocol message requiring broadcasting in a management message. In a method for broadcasting a protocol message received from a wireless portable internet system, a packet including the protocol message required to be broadcasted from a received packet is separated and then is encapsulated in a payload of a control message. A protocol type value of the control message is set according to the protocol type of the protocol message. The control message is broadcasted through dedicated broadcasting control connection based on the protocol type value.
Abstract:
주기적으로 데이터를 처리하는 트래픽 처리 장치에서, 하드웨어적인 클록 신호를 인터럽트로 수신하는 독립부와 소프트웨어적인 클록 신호를 사용하는 종속부가 제공된다. 독립부에서 원하는 데이터 수신시간과 실제 수신 시간의 차이를 계산하여 이를 종속부에 알리면, 종속부는 타이머 값을 조절하여 데이터 전송 시점을 조절한다. 이와 같이 하면, 독립부에서는 원하는 시간에 데이터를 수신할 수 있다. 소프트웨어, 동기, 트래픽, 주기적, 종속적, 데이터 전송
Abstract:
본 발명은 무선 통신 시스템의 AAL2(ATM Adaptation Layer2)타입 ATM셀의 QoS(Quality of Service)를 보장하기 위한 장치 및 방법에 관한 것으로, 제어부에서 정보 처리가 가능하다고 판단되고 타이머 내용 주소화 메모리에 저장 할 영역이 있을 경우 입력 선입선출메모리에서 정보를 받아들인다. 입력된 정보가 타이머 내용 주소화 메모리에 있는지 비교한다. 상기 제2 단계의 비교 결과, 입력된 정보가 타이머 내용 주소화 메모리에 있을 경우 해당 카운터를 초기화시킨다. 상기 제3 단계에서 해당 카운터를 초기화시킨 후 다시 동작시킨다. 상기 제4 단계에서 해당 카운터가 임계값에 도달했는지를 확인한다. 상기 제 5단계의 비교 결과, 상기 카운터의 임계값에 도달했을 경우, 상기 타이머 내용 주소화 메모리에 저장된 해당 정보를 출력한다. 이렇게 함으로써, 중앙처리장치의 부하를 줄이면서 AAL2 타입의 ATM 셀의 QoS보장을 할 수 있다.
Abstract:
본 발명은 비동기 전송 모드 시스템에서의 선택적 유토피아 레벨 1 정합 장치 및 그 구현 방법에 관한 것이다. 본 발명은 유토피아 인터페이스(UTOPIA INTERFACE) 레벨 1을 이용하여 물리 계층 인터페이스를 선택하는 비동기 전송 모드 시스템에서의 유토피아 레벨 1 정합 장치에 있어서, 에이티엠(ATM) 셀의 분할 및 조립을 담당하는 디바이스(DEVICE)로 이루어진 에이티엠 계층부, 유토피아 레벨(UTOPIA LEVEL) 1에 정합되며 광 케이블에 제1 속도로 데이터를 전송하는 제1 물리 계층부, 유토피아 레벨(UTOPIA LEVEL) 1에 정합되며 트위스트 페어(TWIST PAIR) 케이블에 제2 속도로 데이터를 전송하는 제2 물리 계층부 및, 외부로부터 물리 계층 선택 신호가 수신되면, 수신된 선택 신호에 따라 한 개의 물리 계층을 선택한 후, 선택된 한 개의 물리 계층과 에이티엠 계층부를 정합되도록 하는 물리 계층 선택부를 포함하는 것을 특징으로 한다. 이를 통하여, 간단한 구조와 저가격으로 선택적인 유토피아 레벨 1 정합 장치를 구현할 수 있다.
Abstract:
PURPOSE: A device for realizing dual Ethernet channels by using a single MAC engine is provided to independently operate two Ethernet channels by selectively controlling two switches as sharing an MAC engine, a physical device, and a control program, thereby reducing hardware and software consumption. CONSTITUTION: An MAC engine(10) analyzes a header of a signal, and determines a transmission path. A physical device(20) converts inputted data through a physical conversion of the data. The first and second analog switches(31,32) are commonly connected to a transceiving terminal of the physical device(20). The first and second transformers(51,52) are connected to the first and second analog switches(31,32) and the first and second Ethernet ports(P1,P2), respectively. A switch selector(40) drives the first and second analog switches(31,32). A CPU(60) controls an operation of the switch selector(40).
Abstract:
An apparatus for wavelength assignment in wavelength multiplexing optical ring networks includes: a node section receiving a connection setup request, the node section comprising a plurality of nodes; and a wavelength assignment controller connected to the node section for, when the connection setup request occurs, determining paths available between the nodes using sparse wavelength conversion and limited wavelength conversion, calculating the total number of gaps for each node available, and assigning wavelengths to a path having the smallest total number of gaps. The present invention assigns wavelengths in consideration of both sparse wavelength conversion and limited wavelength conversion to minimize the call-blocking probability, and uses the wavelength in adjacent partitions to calculate the number of gaps for each wavelength and the total number of gaps.