Abstract:
본 발명은 전착법을 이용한 무정질 티타늄 산화물 막의 제조방법에 관한 것으로서, 티타늄 염 및 착화제 각각을 0.01 내지 1M의 농도로 포함하는, pH 7 내지 12의 염기성 수용액 중에 상대전극(counter electrode)과 작업전극(working electrode)을 침지시킨 후 양 전극에 전압을 인가하는 본 발명의 전착법에 의하면, 조밀하고 균일하고 핀홀이 없는(pinhole free), 무정질의 티타늄 산화물 막을 온화한 조건에서 간단히 제조할 수 있으며, 이 막은 광감응태양전지 및 광전기화학전지의 전극 등 부식성이 높은 전극의 보호막으로서 유용하게 이용될 수 있다.
Abstract:
본 발명은 황화수소와 이산화황을 동시에 처리할 수 있는 고효율 탈황 방법에 관한 것으로, 본 발명의 탈황 방법은 반응가스 중에 함유된 이산화황을 1차적인 산화제로 이용하여 황화수소와 연속 반응시켜 이산화황과 대부분의 황화수소를 제거한 다음 나머지의 황화수소를 촉매 존재하에 산화제 가스에 의해 산화처리함으로써, 간단한 공정으로도, 특히 클라우스(Claus) 공정에서 배출된 3-5%의 황함유 테일(tail) 가스를 99% 이상의 고효율로 처리할 수 있다.
Abstract:
본 발명은 전착법을 이용하여 미세결정구조의 카드뮴셀레나이드(CdSe) 막을 제조하는 방법에 관한 것으로서, 황산카드뮴(CdSO 4 ) 수용액에 시트르산나트륨(Na 3 C 6 H 5 O 7 ·3H 2 O) 수용액을 첨가하여 pH를 7 내지 9로 조절한 다음, 이를 셀레노아황산나트륨(Na 2 SeSO 3 ) 수용액과 혼합한 후 여기에 상대전극(counter electrode)과 작업전극(working electrode)을 침지시키고 전압을 인가하는 것을 포함하는 본 발명의 전착법에 의하면, 미세 육방결정구조를 갖는 양질의 카드뮴셀레나이드 막을 간단하게 제조할 수 있으며, 이 막은 광에너지를 전기 또는 화학에너지로 전환하는 공정의 전극으로 유용하게 사용된다.
Abstract:
PURPOSE: Provided is a catalyst for reverse-water-gas-shift reaction which functions long time stably under the reduction atmosphere of the Camere reaction of high temperature and high pressure, maximizing the conversion into CO2 and enhancing the yield of methanol consequently. CONSTITUTION: The catalyst is characterized in that ZnO is supported on two or more carriers selected from the group consisting of AlnOm(n,m=1-20), Cr2O3, ZrO2, MgO, Ga2O3, and MnO and thermal treated in the temperature range of 500 to 1000°C for 3-5 hours. ZnO is added to the catalyst in an amount of 50 to 90wt.% based on the total weight of the catalyst.
Abstract translation:目的:提供一种反相水煤气变换反应的催化剂,其在高温高压下的还原气氛下长时间稳定地运行,最大限度地提高了二氧化碳的转化率,从而提高了甲醇的产率。 结构:催化剂的特征在于ZnO负载在选自AlnOm(n,m = 1-20),Cr 2 O 3,ZrO 2,MgO,Ga 2 O 3和MnO的两种或更多种载体上,并在温度范围内进行热处理 在500至1000℃下3-5小时。 基于催化剂的总重量,将ZnO加入到催化剂中的量为50至90重量%。
Abstract:
Economic process for preparation of various acetate, which is ester exchange reaction of alcohol introduced at the top of the distillation tower at below the boiling temperature with excess methylacetate into the bottom at over the boiling temperature at the acid catalyst layer in the middle of the tower. The acid catalyst is ion exchange resin. Methylacetate and acetic acid are obtained from vapor carbonylation of methanols and carbon mono-oxide under existence of rhodium catalyst and halides co-catalyst. Acetate is taken from the bottom of the tower and the excess methylacetate and methanols removed from the top is recycled through the process.
Abstract:
Alcohol is prepd. by hydrogenation reacting hydroxycarboxylic acid ester at 120-280 deg.C under 20.4-272.0 atm (300-40000 psig) in the presence of the catalyst comprising 0.1-80 wt.% of CuO, 0.1-60 wt.% of ZnO, 0.1-80 wt.% of CoO, 0.1-wt.% of FeO and 0-6 wt.% of YO where Y is W, Pd, Pt, Cs, Mg, Ca or Ba. Pref. the reaction is processed in alcohol solvent. The used catalyst has an excellent activity, a selectivity and a stability.
Abstract:
카르보닐화 반응용 로듐 촉매 및 할라이드계 조촉매 존재하에 메탄올을 일산화탄소와 기상 카르보닐화 반응시켜 얻은 아세트산과 메틸아세테이트의 혼합물로부터 아세트산과 메틸아세테이트를 분리하고, 분리된 메틸아세테이트를 수소화 반응기로 유입시켜 Cu산화물을 주성분으로 하는 수소화 촉매 존재하에 수소화시킴으로써 얻은 메탄올과 에탄올의 혼합물로부터 에탄올을 분리하는 것으로 이루어진 메탄올로부터 아세트산 및 에탄올의 병산 방법이 제공된다. 이 방법에 따르면 메탄올의 카르보닐화 반응 조건을 조절함으로써 반응 생성물들의 선택도를 임의로 조절할 수 있기 때문에, 에탄올의 수율을 증대시킬 수 있을 뿐만 아니라 아세트산의 병산도 가능하다.