Abstract:
본 발명은 OBE (On-Board Equipment) 간의 무선통신 및 OBE와 센서 간의 무선 통신을 이용하여 RSE의 전파가 도달하지 않는 영역의 사고 및 교통 상황을 RSE (Road-Side Equipment)에 전송할 수 있는 무선 통신을 이용한 실시간 교통 정보 수집 방법 및 시스템에 관한 것이다. RSE의 통신 범위가 커버하지 못하는 음영 영역의 사고 및 교통 상황에 관한 정보를 음영 영역을 운행 중인 차량의 OBE가 수신하여 통신 가능 범위 내의 RSE에 전달함으로써 실시간으로 음영 영역의 교통 정보 수집이 가능하다.
Abstract:
A method for recovering and tracking a timing using a correlation value estimation window and a computer-readable medium having the program performing the functions embodying the same are provided to accurately recover and track the timing by changing the correlation value estimation window or a threshold value according to channel characteristics. An upper position and a lower position of a correlation value estimation window are limited to include a symbol position with a large correlation value based on a window of a preamble field(S110). The correlation value is checked after an upper limit of the correlation value estimation window reaches on a window corresponding to the preamble field, an FSW(Frame Start Word) field, or a CSW(Channel Start Word) field. It is determined whether the correlation value extends a threshold value(S120). When the correlation value is greater than the threshold value, the upper and lower limits of the correlation value estimation window are updated, and the next window is calculated(S130).
Abstract:
An MOST(Media Oriented Systems Transport) gender and an MOST network using the gender are provided to use an MOST device by connecting a UTP(Unshielded Twisted Pair) cable when usage of a POF(Plastic Optical Fiber) used for configuring a network of the MOST device is restricted, thereby reducing an MOST network configuration cost. An O/E(Optical Electro) converter(210a) converts an optical signal which is a transmission signal of an MOST device(100) into an electric signal to send the signal through an electric cable. An E/O(Electro Optical) converter(210b) converts an electric signal into an optical signal for a receiving signal of the MOST device. A connector interface(220) sends the converted electric signal by connecting with the electric cable, and outputs the electric signal received from the electric cable to the E/O converter to input the outputted signal as the receiving signal of the MOST device.
Abstract translation:提供MOST(面向媒体的系统传输)性别和使用性别的MOST网络,以在使用用于配置网络的POF(塑料光纤)时连接UTP(非屏蔽双绞线)来使用MOST设备 MOST设备受到限制,从而降低了MOST网络配置成本。 O / E(光电)转换器(210a)将作为MOST装置(100)的发送信号的光信号转换为电信号,通过电缆发送信号。 E / O(电光)转换器(210b)将电信号转换成用于MOST装置的接收信号的光信号。 连接器接口(220)通过与电缆连接发送转换的电信号,并将从电缆接收的电信号输出到E / O转换器,以输出输出的信号作为MOST装置的接收信号。
Abstract:
A real-time traffic information collecting method using wireless communication and a system therefore are provided to check out the accident or road states of an area positioned out of a communication range of an RSE(Road-Side Equipment), by using the communication between OBEs(On-Board Equipment) and between the OBE and a sensor. A real-time traffic information collecting method using wireless communication, especially using communication between an RSE(200,210) installed at the road side and an OBE installed in a vehicle, is composed of a step of for transmitting the state information of a first vehicle(300) positioned in a shadow region(110) out of a communication coverage region(120) formed between the RSE and the OBE, from a first OBE(400) installed in the first vehicle to a second OBE(410) installed in a second vehicle(310) passing by the first vehicle, and a step of transmitting the state information of the first vehicle to the first RSE through the second OBE when the second vehicle reaches a communication coverage region.
Abstract:
본 발명은 제1 노드(A), 제2 노드(B), 제3 노드(C) 및 제4 노드(D)로 전류를 출력하는 복수의 PMOS를 포함하는 제1 캐스코드(cascode) 전류 발생기(current mirror)와, 상기 제1 노드, 제2 노드, 제3 노드 및 제4 노드를 통하여 상기 제1 캐스코드 전류 발생기에 연결되고, 상기 제3 노드를 통하여 출력 전압(VOUT)을 출력하는 복수의 NMOS를 포함하며 상기 제2 노드에 게이트가 연결되는 NMOS들은 약한 반전(weak inversion) 영역에서 동작하는 것인 제2 캐스코드 전류 발생기를 포함하는 온도 특성을 개선한 기준전압 발생기에 관한 것이다. 본 발명에 따르면, 온도 변화에 대한 특성을 보상하기 위한 별도의 추가 구성없이 종래의 기준전압 발생기 내의 각 소자를 포화영역 대신 약한 반전 영역에서 동작하도록 함으로써 온도 변화에 따른 특성을 반영하여 기준전압을 발생시킬 수 있다. 기준전압, 온도 변화, 전류 발생기, 캐스코드, 약한 반전 영역, 포화 영역
Abstract:
PURPOSE: An MAC(Media Access Control) processing device is provided to process data of downstream channels as simultaneously extracting overhead information, and to process an AAL5 in software, then to process ATM cells only in hardware, thereby updating exact slot counters and simplifying hardware. CONSTITUTION: An ESF(Extended Super Frame) buffer(102) generates an OH bit from an input bit stream. A bit2byte block(106) removes the OH bit from the supplied bit stream, and processes the bit stream in byte units. An HEC REC block(122) recovers or senses an error of an ATM cell. An ATM filter(124) separates unnecessary ATM cells. A synchronization block(104) adjusts frame synchronization. A scheduler(136) schedules data transmissions of upstream channels by using slot counter information and upstream channel control information. A CRC6 block(112) senses whether an error is generated from a frame. A receive connection buffer(132) extracts the upstream channel control information. A connection table(138) stores necessary information. A read controller(142) reads data to be transmitted to an upstream channel. A head adder(144) and an HEC block(146) configure ATM headers, and generate ATM cells. A ranging block(154) informs of starting time for transmitting data to the upstream channel. A de-interleaver block(108) restores interleaved data to original data.
Abstract:
PURPOSE: A wireless network system for receiving digital broadcasting signals is provided to easily transmit video signals using a copy guard system and an interface. CONSTITUTION: A wireless network system for receiving digital broadcasting signals includes a TV broadcasting receiver, a wireless video transmission/reception module, and a display. The TV broadcasting receiver receives A/V signals, tunes and channel-decodes the A/V signals to transmit the signals to the wireless video transmission/reception module through an interface. The wireless video transmission/reception module accepts the A/V signals from the TV broadcasting receiver and processes the accepted signals to transmit the processed signals to the display through an interface. The display receives the A/V signals from the wireless video transmission/reception module to display the signals.
Abstract:
PURPOSE: An apparatus for processing OOB(Out Of Band) physical layer of a POD(Point of Deployment) module for digital cable broadcast is provided to generate MPEG-2 transport stream with digital broadcasting data transmitted from a head end and deliver digital terminal subscriber information and MAC message to the head end. CONSTITUTION: A synchronous detector(621) synchronizes digital broadcasting data input from a head end(700). A parallel processing converter(622) receives the digital broadcasting data to convert the digital broadcasting data in unit of 1-bit into data in unit of 8-bit. The first buffer(623) receives the 8-bit digital broadcasting data to change the data rate. A deinterleaver(624) deinterleaves the digital broadcasting data whose data rate has been changed. An RS decoder(630) RS-decodes the deinterleaved data. A derandomizer(660) derandomizes the RS-decoded digital broadcasting data to generate MPEG-2 TS data. An FDC block(620) generates the MPEG-2 TS data from the digital broadcasting data transmitted from the head end to send the MPEG-2 TS data to an upper layer. An RDC block(670) transmits the digital data sent to the upper layer to the head end.
Abstract:
본 발명은 디지털 텔레비젼 시스템의 오디오 수신 장치에 관한 것으로, 트랜스포트 스트림으로부터 PSI 데이터와 주 및 보조 오디오 서비스 데이터를 분리하는 TS 디코더와, 상기 TS 디코더에 의해 분리된 주 및 보조 오디오 서비스 데이터를 PES 디코딩하여 주 및 보조 오디오 서비스의 엘레멘트리 스트림을 생성하는 주 및 보조 오디오 PES 처리부와, 상기 주 및 보조 오디오 PES 처리부에 의해 생성된 주 및 보조 오디오 서비스의 엘레멘트리 스트림을 복호하는 주 및 보조 오디오 디코더와, 상기 TS 디코더로부터 제공되는 오디오 서비스 선택신호(SEL)에 따라 상기 주 및 보조 오디오 PES 처리부에서 생성된 주 및 보조 오디오 서비스의 엘레멘트리 스트림을 선택적으로 상기 주 또는 보조 오디오 디코더로 출력하는 선택부와, 상기 TS 디코더로부터 분리된 PSI 데 이터의 PMT에 실려있는 AC-3 디스크립터의 내용을 해석하여 상기 텔레비젼 수신기에서 선택된 방송 프로그램의 오디오 서비스의 종류가 주 오디오 서비스 또는 보조 오디오 서비스인지를 파악하고, 상기 파악된 주 오디오 서비스 또는 보조 오디오 서비스중에서 선택하고자 하는 오디오 서비스가 실려있는 패킷의 PID를 상기 TS 디코더로 제공하여 상기 TS 디코더가 상기 PID를 기준으로 주 및 보조 오디오 서비스를 각기 대응하는 상기 주 및 보조 오디오 PES처리부로 입력되도록 하는 제어부를 포함한다.
Abstract:
본 발명은 블럭 암호화 알고리즘 중에서 가장 널리 사용되는 DES(Data Encryption Standard; 이하 "디이에스"라 함) 알고리즘을 디스클램블링(descrambling)하는 디스클램블링 장치에 관한 것으로서, 암호화된 데이터를 복호화 하는 복호화 시스템에 있어서, 티에스(TS) 비트열의 암호화 된 데이터와, 상기 암호화 된 데이터를 복호화 하기 위한 키 및, 초기설정 벡터를 받아서 디이에스 복호기(DES decrypter)로 전송하는 신호전처리부(1)와; 전송된 암호화된 데이터를 상기 키와 상기 초기설정 벡터를 이용하여 복호화 하는 디이에스 복호기(2 ; DES decrypter)로 구성되어 암호화된 MPEG-2 티에스(TS) 비트열의 암호화 된 데이터를 여러 동작모드에서 효율적으로 복호화 할 수 있는 장점이 있는 것이다.