Abstract:
PURPOSE: Disclosed are a palladium catalyst supported on active carbon, a preparation method thereof and a hydrogenation reaction of chlorofluorocarbon to hydrofluorocarbon using the prepared catalyst. CONSTITUTION: The active carbon used as catalyst support is pretreated with a basic solution of 0.2-1M NaOH at 60-80deg.C for 1-5hours two or five times. And the acid treatment of a hydrochloric acid may be also conducted whenever after the base treatment or the hydrogen fluorine treatment or before loading of palladium species. The palladium species is impregnated by the adsorption precipitation method or the co-precipitation method. The hydrogenation reaction, dehalogenation, of chlorofluorocarbon to hydrofluorocarbon is selectively preformed to increase the yield of HFC-32.
Abstract:
펜타플루오로에탄 제조시 반응 생성물에 포함된 클로로펜타플루오로에탄과 염화수소가 저비점의 공비 혼합물을 형성하는 특성을 이용하여 이 공비 혼합물을 증류탑의 탑정으로 배출하고, 펜타플루오로에탄을 탑저로 회수하며, 증류탑의 탑정에서 배출된 클로로펜타플루오로에탄은 수소화 반응시켜 펜타플루오로에탄으로 전환시키고, 미반응된 클로로펜타플루오로에탄은 수소화 반응의 부생물인 염화수소와 함께 증류탑으로 순환시켜 탑정으로 재분리함으로써 펜타플루오로에탄을 효율적으로 제조하는 방법이 제공된다.
Abstract:
The fine purification method for 1,1,1,2-tetrafluoroethane(HFC-134a) consists of the steps of; (a) separating the top flux of the distillation tower for HFC-134a; (b) neutralizing and drying; (c) removing hydrogen fluorine(HF); (d) removing water from the bottom flux of the distillation tower by drying. The HFC-134a contains no more than 100 ppm of HF and water respectively.
Abstract:
본 발명은 불화수소(HF)와 트리클로로에틸렌(TCE)을 출발 물질로 하여 중간체인 1-클로로-2,2,2-트리플루오로에탄(HCFC-133a)을 거쳐 1,1,1,2-테트라플루오로에탄(HFC-134a)을 제조하는 방법에 있어서, 반응 원료중 HF의 일부를 HCFC-133a 반응기로 유입전에 HFC-134a 제조 반응 생성물과 접촉시키고, 나머지 HF 및 TCE 원료를 HCFC-133a 제조 반응기에 2개소 이상의 구간으로 분할하여 공급함으로써 반응을 효율적으로 수행하는 방법이 제공된다. 즉, HCFC-133a 제조 반응 전반에 걸쳐 반응기 내부 온도의 변화폭을 좁게 유지시킴으로써 촉매 활성의 제한, 다량의 부산물 생성 및 낮은 수율 등의 문제점이 크게 개선된다.
Abstract:
본 발명은 트리클로로에틸렌과 불화수소를 촉매의 존재하에 반응시켜 1,1,1-트리플루오로-2-클로로에탄을 생성하고, 이를 불화수소와 반응시켜 1,1,1,2-테트라플루오로에탄을 제조하는 방법에 있어서, 반응기로 재순환되는 미반응 원료 중의 수분을 제거하여 수분을 제거하여 수분 농도를 일정 수준 이하로 유지함으로써 촉매의 활성 저하를 억제하는 것을 특징으로 하는 방법에 관한 것이다. 본 발명의 방법은 종래의 HFC-134a 제조 방법으로는 예측할 수 없는 방법으로, 종래 방법에 비해 보다 장시간 동안 촉매의 활성을 유지시킬 수 있다.