Abstract:
Industrial waste water is purified in the following way. (1) The step of heating the waste water in vacuum or in an atmospheric pressure to evaporate water, then cooling and condensing the evaporated water vapor. (2) The step of adjusting pH of a distilled water from 2 to 5, and of adding 0.01-1.0 weight % of hydrogen peroxide, 0.01-0.2 weight % of 2+ iron ion in room temperature or 50 deg.C, then getting reacted. Therefore, organic waste water is purified by purely physical and chemical treatment.
Abstract:
The treating method of an industrial waste water or a waste-fill land seepage is characterized by adding 10 wt.% of a sodium chloride(NaCl) to the waste water to have pH 4-10, and oxidation decomposing a dissolved organic material of the waste water in an electrolytic tank having positive and negative electrodes at 1-200mA/cm2 current density. The positive electrode is titanium electrode, and negative electrode is a stainless steel electrode. The treating method of the waste water by the electric oxidation has a good decoloring and decodoring effect.
Abstract:
The method comprises (i) calcining Jarosite at 200-600 deg.C to leach in water, (ii) neutralizing the leached solution with alk. aq. soln. for pptg. and washing the pptn, (iii) mixing pptn. with active material/additive i.e. active carbon, phosphates, gypsum, clay, zeolite, and (iv) molding and drying to have more than 20% of porosity rate.
Abstract:
Extraction of nickel from the low quality laterite ore is effected by leaching electrochemically in the electrolysis bath with a separator between cathod chamber and anode chamber. Nickel is recovered from 0.01-10.0 mol. sulfuric acid solution with blowing the sulfurous acid gas. Also anode chamber consists of 0.01-10.0 mol. sulfuric acid solution including source ore powder under 10 mesh.
Abstract:
본 발명은 마그네슘 하이브리드 전지 및 이의 제조방법에 관한 것이다. 본 발명의 여러 구현예에 따르면, 음극으로 마그네슘금속을 사용하고, 양극으로 마그네슘이온뿐만 아니라 리튬 이온 및 나트륨 이온 중에서 선택되는 1종 이상의 이온이 삽입 및 탈리될 수 있는 양극활물질을 사용하면서, 전해질로 마그네슘 이온을 포함하고, 리튬 이온 및 나트륨 이온 중에서 선택된 1종 이상의 이온을 추가로 포함하여 구성되는 새로운 전지시스템으로 기존 마그네슘이차전지의 한계를 극복함으로써 전지의 용량, 출력특성, 사이클 수명, 안전성 등의 성능을 향상시키는 효과를 달성할 수 있다.
Abstract:
본 발명은 마그네슘 이차전지용 양극 집전체 및 이의 제조 방법에 관한 것이다. 본 발명의 여러 구현예에 따르면, 구리 포일의 양면에 니켈 도금층 또는 니켈 합금 도금층을 포함하고, 상기 도금층 표면에 돌기 구조를 포함하는 마그네슘 이차전지용 양극 집전체는 전해질 용액 상에서 화학적으로 매우 안정하고, 전극 활물질과의 결착력을 증가시킬 수 있으므로 본 발명의 구현예에 따른 양극 집전체를 마그네슘 이차전지의 양극에 이용하는 경우, 전기 전도도가 증대되고 방전 용량이 증가하며 사이클 수명을 증가시키는 효과가 매우 우수하다.
Abstract:
본 발명의 텔루륨의 분리 방법은, 트리부틸 포스페이트 (TBP, tributyl phosphate), 트리스(2-에틸헥실) 포스페이트 (TEHP, (tris(2-ethylhexyl) phosphate)) 및 이들의 조합을 포함하는 군에서 선택된 어느 하나를 포함하는 추출제에 의한 용매추출법을 이용하여, 텔루륨(Te)을 포함하는 용해액으로부터 텔루륨(Te)을 분리하여 회수하는 과정을 포함한다. 본 발명의 텔루륨의 분리 방법은, Bi 2 Te 3 를 포함하는 폐열전소재와 같이 텔루륨(Te)과 다른 금속 원소들이 섞여있는 재료를 용매추출법을 사용하여 고수율, 고순도로 텔루륨(Te)을 분리 및 회수할 수 있어서, 고가의 금속원소인 텔루륨을 재활용할 수 있도록 한다.