Abstract:
An object-based storage system using a PMEM capable of high speed transfer applied to a DMA mode and a transfer method thereof are provided to perform the high speed transfer among a block storage device, a network device, and the PMEM through the DMA mode by installing the PEMM and a dedicated bus between the block storage device and the network device. Each user process part(210) performs a file transfer service. A data storing part(230) stores object data transferred to the network device and permits DMA access to the user process part. A driver part(220) manages the data storing part to enable the DMA access by reporting a storage state. The data storing part includes a block storing part storing the object data in a block unit, a network interface part connecting to the network to transfer the object data from the user process part, and a PEMM part. The PEMM part temporarily stores and outputs the object data in the block unit by respectively connecting to the block storing part and the network interface part through the DMA mode.
Abstract:
A system and a method for maintaining time-based cache coherency of a user file manager in an object-based storage system are provided to enable each user file manager to individually maintain the time-based cache consistency by considering that the cache is valid for a predetermined time based on cached metadata and caching time of the data. A write-back cache(320) stores the metadata and the data. A timer(331) records storage time of the write-back cache. A metadata cache controller(330) fetches the metadata data stored in the write-cache over the predetermined time from a metadata management server(350). A data cache controller(332) fetches the data stored in the write-cache over the predetermined time from the object-based storage device(351). The write-back cache comprises a metadata cache and a data cache(323). The metadata cache comprises a dentry cache(321) and an inode cache(322) respectively storing dentry information and inode information.
Abstract:
본 발명은 클래스, 객체, 객체 식별자, 복합 객체, 상속 등의 개념을 지원하는 객체 지향 DBMS 혹은 객체 관계형 DBMS에서 질의문에 있는 중첩 객체에 대한 경로식을 기존의 중첩 객체 변환 기능과 최적화 기능을 활용하여 효율적으로 처리할 수 있도록 하는데 목적이 있다. 본 발명은 조건절에 경로식이 존재하는 경우 경로식을 중첩 질의로 변환하는 방법을 제공하며, 부질의 변환 과정에서 객체식별자를 표현하기 위한 키워드를 사용하고, 질의 대상 클래스에 상속 관계를 갖는 클래스를 표현하기 위한 문자를 사용한 것을 특징으로 한다. 본 발명을 이용하면 기존 DBMS에 경로식 지원을 위해 쉽게 구현할 수 있고, 또 경로식 처리에 관계형 DBMS 최적화 기법들과 같이 고도의 축적된 기술들이 그대로 활용되므로 매우 효과적이다.
Abstract:
PURPOSE: An apparatus for acquiring a broadcast transport channel interleaving synchronization in an IMT(International Mobile Telecommunication)-2000 terminal and a method therefor are provided to efficiently acquire the 20msec synchronization of a broadcast transport channel without a broadcast transport channel interleaving signal. CONSTITUTION: A secondary deinterleaving result storing unit(105) stores broadcast transport channel data which are secondarily deinterleaved by a 10ms unit. If data corresponding to 30ms are stored in the secondary deinterleaving result storing unit(105), a primary deinterleaver unit(107) primarily interleaves data with a length of 20ms, centering around a certain time, among the stored data according to a timing control signal. A CRC(Cyclic Redundancy Check) unit(111) performs the CRC of the primarily deinterleaved data. A timing control unit(113) generates the timing control signal, and provides the timing control signal to the primary deinterleaver unit(107). If an error exists as a result of the CRC of the CRC unit(111), the timing control unit(113) delays the generation of the timing control signal by 10ms from the certain time, and generates the timing control signal.
Abstract:
본 발명은 다수의 보안 영역을 갖는 분산 시스템 환경에서 사용자 접근 제어 방법 및 이를 위한 서버의 구조에 관한 것이다. 종래에는 다수의 보안 영역을 지원하는 분산 처리 시스템에서 사용자의 접근을 제어하기 위하여 각 보안 영역마다 독립적으로 사용자에 대한 권한 정보를 관리하는 방법을 사용하였다. 그러나 이 방법은 한 사용자가 다중 보안 영역의 여러 보안 영역에 포함될 경우, 이 사용자의 권한 정보가 중복되고 또한 다중 보안 영역에 소속한 사용자의 일관된 권한 관리가 복잡해지는 문제점이 있다. 이와 같은 문제점을 해결하기 위하여, 본 발명에서는 서로 다른 보안 영역 사이에 위치하는 변환 서버 및 이 변환 서버에서 두 보안 영역 간의 사용자 권한을 상호 변환한 정보를 관리하는 권한 변환 테이블을 이용하므로써, 분산 시스템의 각 보안 영역별로 유지하는 접근 제어 리스트의 크기를 감소시키고 하나의 사용자 권한이 서로 다른 영역들에서 일관되게 관리될 수 있는 다수의 보안 영역을 갖는 분산 시스템 환경에서 사용자 접근 제어 방법 및 이를 위한 서버의 구조가 제시된다.
Abstract:
본 발명은 IS-54 및 JDC에 채택된 Π/4 전이 QPSK 변조기용 펄스 성형 필터에 관한 것이다. 종래 기술은 쉬프트 레지스터의 단수의 증가에 따라 메모리 워드의 용량이 증가하여 하드웨어가 복잡하게 되어 디지탈 집적화를 구현하는데 난이한 문제점이 있었다. 이를 해결하기 위해 본 발명은 I-채널, Q-채널의 심볼 결정회로와, 이 심볼 결정회로에서 출력된 입력신호값을 역다중화하는 각 디멀티플렉서와, 그 각 디멀티플렉서로 부터 출력된 데이타를 기수 및 우수 심볼 클럭에 따라 전이하는 여러개의 쉬프트 레지스터와, 이 쉬프트 레지스터들로 부터 출력된 어드레스 값을 생성하기 위해 다중화하는 멀티플렉서와, 그 다중화된 어드레스 값을 각각 저장하는 여러개의 롬 테이블과, 이 롬 테이블들에 저장된 데이타를 다중화 및 가산하여 출력하는 멀티플렉싱 및 가산부로 이루어져, 쉬프트 레지스터의 단수 증가에 따른 메모리 용량을 크게 감소시킬 수가 있는 것이다.
Abstract:
본 발명은 이동통신 단말기를 비롯하여 노트북 컴퓨터 등 축전지를 사용하여 전원을 공급하는 기기 및 장치에서 축전지의 메모리 효과를 제거하기 위한 방법에 관한 것으로, 다수의 축전지와 이 축전지의 상태를 검출하는 축전지 상태 검출부 및 이 검출부의 검출신호에 따라 상기 축전지의 충방전을 제어하는 제어부를 포함하여 구성되는 충전장치에 있어서, 상기 축전지 상태 검출부가 다수의 축전지의 충전종지 전압과 방전종지 전압 상태를 검출하는 제1단계와, 상기 제1단계에서 상기 축전지 상태 검출부가 축전지 모두 방전종지 전압 상태임을 검출하는 경우 제어부가 축전지의 전압상태를 충전모드로 전환시켜 상기 축전지를 충전시키도록 제어하는 제2단계와, 상기 제1단계에서 상기 축전지 상태 검출부가 임의의 축전지가 충전종지 전압상태이� ��, 임의의 다른 축전지가 방전종지 전압상태임을 검출하는 경우 상기 제어부가 방전종지상태인 축전지는 충전상태로 전환시키고 충전종지상태인 축전지는 방전상태로 전환시키어 각각 축전지의 충, 방전을 제어하는 제3단계와 상기 제1단계에서 상기 축전지 상태 검출부가 임의의 축전지가 방전상태임을 검출하는 경우 상기 제어부가 상기 축전지를 종지전압 상태까지 방전시킨 후 충전중인 임의의 축전지와 충방전을 교번시키도록 제어하는 제4단계를 포함하여 이루어져, 다수의 축전지를 사용하여 충방전을 교번시키고, 이에 따라 상기 축전지를 항상 방전종지 전압가지 사용한 후 다시 충전할 수 있어 축전지의 수명을 최대한으로 유지할 수 있는 장점이 있다.