Abstract:
A routing device and a method thereof using an adjacent node in wireless sensor network are provided to improve a throughput by each node by determining next sensor node transmitting data according to a target node. An adjacent node decision unit(610) determines adjacent node among nodes. A transmit unit(650) directly transmits data to the adjacent node connected to the destination node. A hop number comparator(640) compares a hop count required for a hierarchical routing mode and a hop count required for the hierarchical routing mode after the direct transmission.
Abstract:
An interactive sensor node, and an interactive sensor network system and data communication method using the same are provided to store data without having to dismantle a sensor node, and effectively manage and maintain the sensor node. A hand scanner(22) recognizes a character node information list(21) a manager writes out, and stores the recognized character node information list. In addition, the hand scanner which includes an IrDA(Infrared Data Association) port(221) transmits the inputted character node information list to a sensor node(23) through the IrDA port. The sensor node senses its target area to obtain the first sensing information, stores the first sensing information and the node information received from the hand scanner as the first storage information, and transmits the first storage information to a target node(24). The target node senses its target area to obtain the second sensing information, stores the second sensing information and the first storage information received from the sensor node as the second storage information, and transmits the second storage information to its target node or an external server.
Abstract:
A switched beam forming apparatus is provided to enhance system efficiency and a signal to noise ratio, and improve a signal separation characteristic by reducing power consumption while maximizing an impedance value. A switched beam forming apparatus includes a plurality of antenna devices(101), a switched beam forming circuit(102), a plurality of frequency converters(104), a plurality of switches(107), and a decoding unit and a baseband unit(106). The antenna devices have a plurality of directionalities. The switched beam forming circuit separates signals received from the antenna devices into a plurality of independent beams to output the beams. The frequency converters mixes signals passing through a plurality of paths outputted from the switched beam forming circuit with signals outputted from a local oscillator. The switches connect signals of N-1 paths excluding the signals outputted from the frequency converters to resistors(108). The decoding unit and the baseband unit receive only one directional signal which is not connected to the switches and the resistor from the frequency converters and decode the received signal.
Abstract:
A synchronization system of a sensor network for low power and a method thereof are provided to transmit data after synchronizing each node of the sensor network, and to perform transition into a sleep mode again, thereby reducing power consumption of nodes. Synchronization is prepared as a packet informing of starting of the synchronization is received(601,602). A packet to be substantially synchronized as including synchronization time information is received(603). The synchronization is performed on the basis of the synchronization time information within the packet to be substantially synchronized(604).
Abstract:
1. 청구범위에 기재된 발명이 속한 기술분야 본 발명은 개구부를 갖는 적층형 필터링 커플러에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 다층 기판상에 층을 구분해서 상층과 하층에 각각 필터를 구현하고 입출력 부분의 접지면에 커플링을 위한 개구부를 형성함으로써, 소형화가 가능하고, 필터링 특성의 향상과 설계의 용이성 및 저 손실 특성을 갖는 개구부를 갖는 적층형 필터링 커플러를 제공하는데 그 목적이 있음. 3. 발명의 해결방법의 요지 본 발명은, 상하층을 구분하기 위한 접지면과, 상층 및 하층을 갖는 다층 유전체 기판을 이용한 적층형 필터링 커플러에 있어서, TEM 전송 선로를 이용해 상기 상층에 형성된 제1 필터; 상기 TEM 전송 선로를 이용해 상기 하층에 형성된 제2 필터; 적어도 상기 제1 필터와 상기 제2 필터 중 어느 하나의 필터에 연결된 제1 지연 선로; 및 상기 제1 필터와 상기 제2 필터의 입출력 부분에 대응되는 위치의 상기 접지면에 각각 형성된 제1 및 제2 개구부를 포함함. 4. 발명의 중요한 용도 본 발명은 필터링 커플러 장치 등에 이용됨. 필터, 커플러, 다층, 기판, 개부, 유전체
Abstract:
1. 청구범위에 기재된 발명이 속한 기술분야 본 발명은, 비아를 이용한 도파관 필터에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은, 최상위 및 최하위에 접지면을 구비하고, 두 접지면 사이에 다층의 유전체 기판을 구비하며, 도파관의 양쪽 벽면은 두줄로 나열된 비아를 사용하여 구현하는 동시에 도파관 내부에도 비아를 사용함으로써, 그 제작을 용이하게 하고, 그 삽입손실 및 크기를 줄이기 위한, 비아를 이용한 도파관 필터를 제공하는데 그 목적이 있음. 3. 발명의 해결방법의 요지 본 발명은, 최상위 및 최하위에 제 1 및 제 2접지면을 구비하는, 비아를 이용한 도파관 필터에 있어서, 상기 제 1 및 제 2접지면 사이에 배치되어, 도파관을 형성하는 적어도 하나 이상의 유전체 기판; 입/출력 포트와 상기 도파관 사이의 신호를 전이하기 위한 변환 수단; 및 상기 변환 수단에 접속되어, 외부의 타(他) 소자와 신호를 주고받기 위한 상기 입/출력 포트를 포함하되, 상기 도파관의 양 벽이 적어도 하나 이상의 열로 나열된 비아로 구현되고, 상기 도파관의 중심에 횡방향을 따라 소정의 간격으로 비아를 나열하여 E평면 도체 스트립으로 동작하게 한 것을 특징으로 함. 4. 발명의 중요한 용도 본 발명은 광대역 4세대 무선통신 시스템 등에 이용됨. 도파관, 필터, 비아, 도체 스트립, E평면, 밀리미터파
Abstract:
본 발명은 LTCC(Low Temperature Co-fired Ceramic) 기판을 이용한 플립 칩 기술을 통해 기판 및 실장되는 칩의 낮은 열전도율을 개선시킬 수 있는 칩이 실장된 통신 송수신 모듈에 관한 것으로, 이를 위해 본 발명에서는 적층된 복수의 유전체 기판; 상부 일부층의 상기 유전체 기판이 국부적으로 오픈되어 형성된 복수의 캐버티; 상기 캐버티 내에 플립 칩 방식으로 실장되며, 상부면이 상기 캐버티의 저면으로 부터 이격된 상태로 대향하여 실장된 칩; 상기 칩의 하부면에 전도성 접착제를 통해 접속되며, 최상부의 상기 유전체 기판을 덮는 도전판을 포함하는 통신 송수신 모듈을 제공한다. 통신 송수신 모듈, LTCC, MMIC, 플립 칩, 캐버티
Abstract:
PROBLEM TO BE SOLVED: To simplify a power transmission and a directivity error detection structure for tracking by using a power transmission and a DC motor which generate small noises and making a tracking speed quicker. SOLUTION: Active modules 120, 130 supply two signals received from array antennas 100, 110 to a power combining portion 140 to combine them. A frequency converter portion 150 supplies a bias from a signal distribution/detection portion 160, and converts a satellite signal into a signal of a frequency band lower than that. The distribution/detection portion 160 distributes the satellite signal received from the converter portion 150, supplies it to a rotary joint 190, receives a tracking signal selection signal from a satellite tracking portion 170 for detecting a tracking signal, and detects the strength of a signal of a desired channel. The control portion 170 carries out satellite tracking algorithm, supplies a control signal for phase transition to the active module 120, and supplies a motor control signal to a power transmission portion 180. COPYRIGHT: (C)2003,JPO
Abstract:
PURPOSE: A method for controlling the clock synchronization of a digital process phase locked loop(PLL) is provided to reduce the time required for synchronizing the self generation clock with the external reference clock. CONSTITUTION: A method for controlling the clock synchronization of a digital process phase locked loop(PLL) includes the steps of: (a) determining(S401) whether or not the PLL is first performed; (b) if the PLL is first performed at step (a), storing(S405) the shift time shifting to the following step and the digital/analog control data on a non-volatile memory with performing the PLL; and (c) if the PLL is not first performed at step (a), performing(S409) the PLL during a time being shorter than the process time of the PLL at step (b) by using the shift time shifting to the following step and the digital/analog control data stored at step (b).
Abstract:
본 발명은 동일 레벨 처리불가 시간등록에 의한 인터럽트 실행순서 제어방법에 관한 것으로서, 주기적으로 발생하는 고실시간성 인터럽트 발생시각의 일정 시간전에 다른 동일 레벨의 인터럽트가 발생하면 이의처리를 연기하기 위해 동일레벨 인터럽트의 처리 제한시간을 나타내는 동일레벨인터럽트 처리불가 시간, 상기 특정 인터럽트가 동일레벨인터럽트 처리불가 시간등록/해제를 요구하였을 때 이의 등록/해제요구를 처리하고 인터럽트 발생시 동일레벨의 인터럽트인가를 구별하기 위한 인터럽트 서비스루틴 스터브, 동일레벨 인터럽트 처리불가 시간이 등록된 상태에서 이 제한시간 이내에 다른 동일레벨 인터럽트가 발생하면 인터럽트서비스 루틴 스터브에 의하여 곧이어 발생할 고실시간성 인터럽트의 처리후에 이 인터럽트를 처리하기 위한 작업을 저장하기 위한 인터럽트 작업 큐, 고실시간성 인터럽트 처리루틴의 등록/해제시 인터럽트번호와 동일 레벨인터럽트 처리불가시간정보를 추출하여 등록/해제를 요구하기 위한 인터럽트 서비스 루틴등록/해제프리미티브로 구성된 동일레벨을 갖는 인터럽트 실행순서를 실행함으로써, 동일레벨인터럽트들에서도 실행순서를 부여할 수 있으며, 동일레벨의 다른 인터럽트들 보다 실행의 고실시간성을 부여할수 있고, 발생한 인터럽트에 대하여 선처리할 수 있는 과정을 추가할 수 있으며, 수행의 가장 우선권을 갖는 새로운 인터럽트 작업큐를 생성하는 효과가 있다.