Abstract:
랜(LAN : Local Area Network) 에뮬레이션(LAN Emulation)은 이더넷(Ethernet)이나 토큰링(Token Ring)과 같은 기존 랜 환경에서 기존의 상위 응용 소프트웨어를 변경없이 ATM(Asynchronous Transfer Mode, 이하 ATM 이라 칭함) 환경에 상호 운용되도록 하는 통신 규약이다. 랜 에뮬레이션 클라이언트는 종단 점에 있는 장치나 IP(Internet Protocol)라우팅 기능을 제공하는 서버 장치에서 ATM과의 접속을 위해 MAC(Medium Access Control) 기능을 에뮬레이션(emulation)하는 2 계층 기능을 제공하는 데 사용된다. 특히 ATM 기반의 스위치드 라우터(Switched Router) 장치에서의 IP 라우팅 기능을 제공하기 위해서는 지원하는 IP 라우팅 인터페이스 포트 수만큼의 서로 다른 에뮬레이티드 랜(ELAN: Emulated LAN)에 가입되는 랜 에뮬레이션 클라이언트 기능이 필요하다. 랜 에뮬레이션 표준 규격에서는 하나의 엔터티에 대한 통신규약을 정의하고 있으며, 이를 바탕으로 본 발명에서는 다중 랜 에뮬레이션 클라이언트 엔터티 기능을 하나의 보드 내에서 제공하기 위한 구조적 방법과 동작 및 상호작용을 기술한다.
Abstract:
본발명은근거리망서비스를 ATM상에서제공하는비동기전송방식장비(이하 ATM-LAN라칭함)에서 MPOA 서비스를제공하는데있어서 ATM상의다중규약처리기능(Multiprotocol Over ATM, 이하 MPOA라칭함)의가장큰 단점인확장성결여문제를보완하기위한방법에관한것이다. 상세하게는 MPOA망내에일어날수 있는완전연결(full mesh) 구조가일어나지않도록하여 MPOA망에서확장성을제공하기위한 ELAN 혹은 LIS간중복 VCC 연결수의최소화방법에관한것이다. 본발명은근원 MPC가다른모방화된근거리망(Emulated LAN, 이하 ELAN이라칭함)이나논리적인터넷규약분할망(Logical Internet Protocol Segment, 이하 LIS라칭함)에속한목적 MPC와통신하고자할 때이미해당 ELAN이나 LIS와통신하는다른 MPC나다른가상채널연결(Virtual Channel Connection, 이하 VCC라칭함)가존재하면현재통신하고있는 MPC나 VCC로정보를보낸다. 그리고 MPC에서받은정보를분석하여자신에게착신되는정보가아니면목적 MPC에게정보를전달한다. 이에대한모든처리는 MPC를관리하는 MPOA 서버(MPOA Server, 이하 MPS라칭함)의제어로이루어진다. 본발명의방법을적용하면모든 ELAN 내부와 ELAN간에는최악의경우완전연결구조를이룰수 있으나 MPOA망전체의완전연결구조는탈피할수 있다. 따라서 MPOA망의확장성을제공할수 있게된다.
Abstract:
PURPOSE: A high performance switched router system based on a high speed ATM cell switch for effectively processing an ATM and Ethernet traffic is provided to simultaneously offer a connection function to an Ethernet network and an ATM network for constructing an effective Internet data communication network for a high quality Internet service. CONSTITUTION: A switch unit(410), subscriber network connection units(420,430), a processor unit(440) and a layer 3 processing unit(450) related to an ATM traffic are connected by a switch port(460). System initialization of a control management processor unit(441) and a transmission and receipt of system monitoring data are performed by a specific dedicated initialization and system monitoring channel(490). The Ethernet network connection unit(430), the processor unit(440), and the layer 3 processing unit(450) include SAR(Segmentation And Reassembly)-4 function units(432,443,452) for providing a high performance ATM cell SAR function, respectively. The SAR-4 function units(432,443,452) provide an SAR processing function to a maximum bandwidth provided by one Ethernet network connection unit.
Abstract:
PURPOSE: A method for minimizing the number of overlay VCC connections in an ELAN or LIS for providing an expansion in a MPOA network is provided to implement an expansion of a network in a MPOA network formed of a plurality of emulated LAN(ELAN) and a logic internet protocol segment(LIS) network. CONSTITUTION: When an inlet MPC(67) communicates with an outlet MPC(68), the inlet MPC(67) requests an address interpretation of the outlet MPC(68) to the inlet MPS(63). The inlet MPS(63) checks itself cache(70) before outputting an address interpretation message to the outlet MPS(64). The inlet MPC(67) receives a response from the inlet MPS(63) and sets a connection with the inlet MPC(68) in accordance with an address of a destination and outputs an information through a corresponding connection. When the inlet MPC(67) communicates with the outlet MPC(69), the inlet MPC(67) transmits an address interpretation request to the inlet MPS(63) for asking the address of the outlet MPC(69). The inlet MPS(63) receives the message and checks its cache(70) and transmits an address interpretation request message to the outlet MPS(64). The outlet MPS(64) receives the address interpretation request message and transmits the cache validation request message to the outlet MPC(69) in the same manner.
Abstract:
PURPOSE: A controlling method of variable-structured cell-buffering-queue for dynamic congestion control is provided to perform more intelligent and various congestion control dynamically in a high speed data transmission network by controlling the congestion control with variable structure according to the transmission to a cell and the dynamic state variation. CONSTITUTION: Threshold values of the occurrence and the cancellation of congestion are variably determined by the state of data transmission, the dynamic variation of communication network condition and a variable control request from a network management controller. The occurrence of congestion and the cancellation of congestion are decided based on the number of current input cells input in the area of the determined threshold values of the occurrence and the cancellation of congestion. A bit for displaying the occurrence or the cancellation of congestion is set or reset by the decided result. While cell-buffering-queue controllers(310) having various hysteresis characteristics are applied, cell-buffering-queue controllers proper to the characteristic of an outer control request are applied alternately.
Abstract:
1. 청구 범위에 기재된 발명이 속한 기술분야 본 발명은 비동기전송모드 망에서의 멀티캐스트 연결 방법에 관한 것임. 2. 발명이 해결하려고 하는 기술적 과제 본 발명은 가상 경로 식별자/가상 채널 식별자 필드를 이용하여 비동기전송모드 계층에서 멀티캐스트 연결을 수행하기 위한 멀티캐스트 연결 방법을 제공하고자 함. 3. 발명의 해결방법의 요지 본 발명은, 멀티캐스트 클라이언트가 멀티캐스트 서버와 통신 채널을 설정한 후에 상기 멀티캐스트 서버에 등록하는 제 1 단계; 상기 멀티캐스트 클라이언트가 상기 멀티캐스트 서버로 멀티캐스트 연결 설정 및 해제 프레임을 송신하면 상기 멀티캐스트 서버가 멀티캐스트 연결 설정 및 해제를 요구하는 프레임을 생성하여 관련된 다수의 멀티캐스트 클라이언트로 전송한 후에 가상 경로 식별자/가상 채널 식별자 연결 테이블을 갱신하는 제 2 단계; 및 상기 멀티캐스트 클라이언트가 상기 멀티캐스트 서버로부터 멀티캐스트 연결 설정 및 연결 해제 프레임을 수신하면 가상 경로 식별자/가상 채널 식별자 연결 테이블을 갱신하는 제 3 단계를 포함한다. 4. 발명의 중요한 용도 본 발명은 비동기전송모드 망에서의 멀티캐스트 연결에 이용됨.
Abstract:
본 발명은 비동기 전송모드(ATM) 계층에서 멀티캐스트 연결 능력을 제공하기 위한 VPI/VCI 지정 방법에 관한 것이다. 현재 IP 기반의 멀티캐스트 서비스의 대부분은 IP 레벨과 같은 전달 레벨 이상에서 수행되므로 멀티캐스트 기능을 제공하기 위해 ATM 계층 이상의 상위 계층에서 패킷을 복사하는 큰 처리 부담을 갖게 된다. 지금까지 ATM 계층은 점대점 연결 구조에 대한 기능만이 연구 개발되었으며, 그로 인해 멀티캐스트에 대한 기능을 지원하지 않고 있다. 만약 ATM 계층에서 멀티캐스트 연결 능력을 제공한다면 이에 발생되는 문제는 효율적으로 VPI/VCI 주소를 할당하여 멀티캐스트 대상 시스템들과 연결하는 방법이다. 따라서 본 발명에서는 ATM 계층에서의 멀티캐스트 도메인의 크기에 따라 종류 1, 종류 2 및 종류 3으로 VPI/VCI를 할당하고, 이를 ATM 스위치와 멀티미디어 VPI/VCI 서버에서 해독하므로써 멀티캐스트 또는 브로드캐스트 연결 능력을 제공한다.
Abstract:
본 발명은 근거리망 모방 이용자(LE Client, 이하 LEC라 칭함)를 관리/처리하는 서버가 종료되면 LEC는 다른 서버에 소속되어 지속적으로 ATM-LAN 서비스를 받을 수 있는 방법에 관한 것으로서, 근거리망 모방의 제공자(LES)로부터 종료하라는 명령을 통보 받으면 종료해야 하는지 판단하여 종료할 필요가 없으면 기존의 LES와 정상적인 종료 절차를 거친 후에 LEC는 근거리망 모방의 구성 제공자(LECS)에게 새로운 LES 할당을 요구하는데 이때 LECS에서 근거리망 모방(LANE) 망에 대한 구성 및 상태 정보를 이용하여 LECS에게 가장 적합한 새로운 LES를 선택하여 LEC에게 통보하여 수행함으로써, ATM-LAN에서 LAN 장비 및 LAN 응용 소프트웨어는 자신을 관리/처리하는 LEC를 통하여 지속적으로 ATM 서비스를 받을 수 있는 효과를 얻을 수 있다.