Abstract:
본 발명은 고출력 PLC 광송신 모듈과 PLC 광송수신 모듈에 관한 것으로, 고출력 PLC 광송수신 모듈은, PON 시스템의 OLT에 위치하는 광송수신 모듈에 있어서, 광신호를 입력받아 전기신호로 변환하는 포토 다이오드; 소정 파장의 광신호를 발생하는 레이저 다이오드; 레이저 다이오드에서 발생된 광신호를 증폭하는 반도체 광증폭기(SOA); 반도체 광증폭기에서 증폭된 광신호를 결합하여 스플리터로 출력하고, 스플리터로부터 입력된 광신호를 분할하여 포토 다이오드로 출력하는 광커플러; 및 포토 다이오드, 레이저 다이오드, 반도체 광증폭기 및 광커플러를 하나로 패키징하여 고출력으로 광신호가 출력되도록 하는 PLC 플랫폼;으로 구성되어, PON 시스템에서 하나의 PLC 플랫폼에 집적화되어 있는 광송신 모듈 또는 광송수신 모듈을 제공할 수 있다.
Abstract:
A pluggable optical transceiver module is provided to enable a user to check the connection state of a power source with eyes, when the pluggable optical transceiver module is combined to a receptacle of a system board and to display the state of an optical transmission and receiving function when the module is operated. A pluggable optical transceiver module(100) separated from/installed to a receptacle of an optical transceiver system having a clamp by sliding one end into the receptacle is composed of a housing frame(30) having an adapter(31) to which an optical transceiver element(70) is installed; a rotary lever(10) equipped with a handle unit at one end and a press unit on the other end, to turn around one side of the housing frame in the predetermined angle; and an elastic arm member(20) pivotally combined to the housing frame to rotate by interlocking with the rotary lever. One end of the elastic arm member is contacted with the press unit according to the rotation state of the rotary lever and the other end is installed to or separated from the clamp of the receptacle by a rotary motion.
Abstract:
A laser diode having an abrupt turn-on characteristic, an optical transmitting device using the same, and an optical communication device using the same are provided to obtain enough optical output and a low power RF(Radio Frequency) operation characteristic based on a high on/off extinction ratio. A laser diode having an abrupt turn-on characteristic includes an active area(Aact), and an absorbing area(Aab). The active area generates laser light by the application of current, and controls a gain. The absorbing area absorbs the optical power generated at the laser diode in the current lower than the abrupt threshold current below the operation current which generates the target optical power required in the laser diode. The laser diode absorbs the optical power at the absorbing area by using an optical device having an absorbing function.
Abstract:
본 발명은 플러그블 광송수신 모듈에 관한 것으로, 일단이 클램프로 이루어진 광송수신 시스템 본체의 리셉터클 내부로 슬라이딩 되며 탈착 또는 장착되는 플러그블 광송수신 모듈로써, LED 표시 부재와 광송수신 소자를 장착하는 어댑터를 가지는 하우징 프레임; 상기 하우징 프레임의 일측을 중심으로 하여 소정 각도만큼 회전 가능하도록 일단은 손잡이부가 형성되어 있고 타단은 가압부가 형성되어 있는 회전 레버; 및 상기 회전 레버에 의해 연동되어 회전 운동할 수 있도록 상기 하우징 프레임에 피봇팅된 것으로, 상기 회전 레버의 회전 상태에 따라 상기 가압부와 접촉될 수 있는 일단과 이에 따른 회전 운동에 의해 상기 리셉터클의 클램프로부터 장착 또는 탈착되는 타단으로 형성된 탄성 암 부재;로 구성되어, 광통신 시스템 본체에 형성된 리셉터클에 장착 또는 탈착이 가능한 플러그블 광송수신 모듈을 제공한다.
Abstract:
본 발명은 전력 소모가 작고 적은 전류 변화에 의해 높은 on/off 소광비를 얻을 수 있으며, 또한 고속의 광신호 변조가 가능한 레이저 다이오드, 그 레이저 다이오드를 이용한 광송신 장치, 및 그 광송신 장치를 포함한 광통신 장치를 제공한다. 그 레이저 다이오드는 전류의 인가에 의해 레이저 광이 생성되고 이득이 조절되는 능동(active) 영역; 및 레이저 다이오드에 요구되는 목표 광파워를 생성하는 동작 전류 이하의 급격 문턱(abrupt threshold) 전류 미만의 전류에서 레이저 다이오드에서 발생한 광파워를 흡수하는 흡수영역;을 포함하고, 급격 문턱 전류에서 출력 광파워가 급격히 증가하는 급격한 턴온(turn-on) 특성을 갖는다. 레이저 다이오드, 소광비, 흡수체
Abstract:
A hybrid optical transceiver module and a passive optical network comprising the same are provided to package an LD portion in a TOSA structure and package an SOA, a PD, and a WDM coupler in a PLC structure to make two packages into one, thereby solving an optical alignment problem caused by a narrow optical emission angle. A hybrid optical transceiver module is comprised of a first package(100) of a TOSA(Transmitter Optical Sub-Assembly) structure and a second package(200) of a PLC(Planar Lightwave Circuit) platform structure. The first package includes an LD(Laser Diode)(110), a first MPD(Monitor Photo Diode)(130), and a lens(120) for concentrating a transmission optical signal outputted from the LD to emit the transmission optical signal to the outside of the first package. The second package includes an SOA(Semiconductor Optical Amplifier)(210), a second MPD(240), a PD(Photo Diode)(220), an optical waveguide(232), and a WDM(Wavelength Division Multiplex) coupler(230). The SOA receives the transmission optical signal emitted from the first package to emit a high-power transmission optical signal to the outside. The second MPD monitors the high-power transmission optical signal. The PD receives a reception optical signal inputted through an optical fiber(250). The optical waveguide transmits the high-power transmission optical signal emitted from the SOA to the optical fiber. The WDM coupler transmits the reception optical signal to the PD and divides the high-power transmission optical signal and the reception optical signal. The first package and the second package are coupled with each other through optical alignment. A PON(Passive Optical Network) system includes a splitter for transceiving signals to an ONT(Optical Network Terminal) separatedly. The signal is in a TDMA(Time Division Multiplexing Access) type.
Abstract:
A high output PLC(Planar Lightwave Circuit) optical transmission module and a PLC optical transmission/reception module are provided to implement a small optical transmission module or optical transmission/reception module at a relatively low cost by integrating a laser diode, a semiconductor optical amplifier, and a photodiode of a light receiving unit on a single PLC platform. A laser diode(330) generates a light signal having a certain wavelength. An SOA(Semiconductor Optical Amplifier)(350) amplifies the light signal generated by the laser diode(330) and outputs it to a splitter. A PLC platform packages the laser diode(330) and the SOA(350) so that the light signal can be outputted with high power. A monitor diode(mPD)(320) monitors the light signal generated from the laser diode(330).