Abstract:
본 발명은 주파수 합성기에 대한 것으로, 이 장치는 기준 주파수와 피드백 주파수를 수신하고 비교하여 비교 신호를 출력하는 주파수/위상 검출기, 상기 비교 신호를 수신하여 상기 비교 신호에 대응하는 전류를 출력하는 전하펌프, 상기 전하 펌프의 출력 전류에 대응하여 전압을 생성하는 저역통과필터, 상기 저역통과필터의 전압을 수신하고, 이를 증폭하여 부스팅 전압을 생성하고, 수신 전압에 대응하는 주파수를 출력하는 전압제어 발진기, 그리고 상기 전압제어 발진기의 부스팅 전압을 수신하고, 직류 변환하여 상기 전하펌프의 전원 전압으로 인가하는 직류전압 변환기를 포함한다. 따라서, 전하 펌프의 공급 전원을 전압 제어 발진기로부터 제공함으로써, 주파수 합성기는 광대역, 저 위상잡음, 외부환경 또는 공정편차에 의한 성능저하 방지의 우수한 특성을 갖는다. 주파수 합성기, 전압 제어 발진기, 전하 펌프, 전원전압, 부스팅
Abstract:
PURPOSE: A low voltage frequency synthesizer is provided to prevent performance deterioration caused by a broadband, low phase noise, external environment, and process deviation by supplying the supply power of a charge pump from a voltage-controlled oscillator. CONSTITUTION: A frequency/phase detector(140) receives and compares a reference frequency and a feedback frequency and outputs comparison signal. A charge pump(110) receives the comparison signal and outputs a current that corresponds to the comparison signal. A low band pass filter(120) generates a voltage in correspondence to the output current of the charge pump. A voltage-controlled oscillator receives the message of the low band pass filter. A DC voltage converter(150) receives the boosting voltage of the voltage-controlled oscillator.
Abstract:
본 발명의 차동신호를 출력하는 전압 제어 발진기는 제1 전압을 공급하는 제1 전원에 연결되어 있는 인덕터, 차동 스위칭을 위한 제1 및 제2 트랜지스터, 인덕터에 병렬로 연결되어 있는 제1 및 제2 가변 커패시터, 제1 노드에 게이트 전극이 연결되어 있는 제3 트랜지스터, 그리고 제2 노드에 게이트 전극이 연결되어 있는 제4 트랜지스터를 포함하며, 제1 트랜지스터의 게이트 전극에 바이어스 전압이 인가되어 턴온되는 경우, 제1 트랜지스터를 통해 제1 및 제2 커패시터로 인가되는 전압에 의해 부성저항이 생성되며, 제3 트랜지스터의 게이트 전극에 제1 노드를 통해 출력되는 전압이 인가되어 턴온되는 경우, 제3 트랜지스터에 의해 제1 및 제2 커패시터에 추가적으로 전압이 인가되어 부성저항이 증가된다. 제2 트랜지스터의 게이트 전극에 바이어스 전압이 인가되어 턴온되는 경우, 제2 트랜지스터를 통해 제3 및 제4 커패시터로 인가되는 전압에 의해 부성저항이 생성되며, 제4 트랜지스터의 게이트 전극에 제2 노드를 통해 출력되는 전압이 인가되어 턴온되는 경우, 제4 트랜지스터에 의해 제3 및 제4 커패시터에 추가적으로 전압이 인가되어 부성저항이 증가된다. 전압 제어 발진기, 콜피츠(Colpitts), 부성저항, 가변 커패시터
Abstract:
PURPOSE: By reducing the process drift by the parasitic component the differential collpitts voltage controlled oscillator improving the negative resistance negative improves the frequency error. CONSTITUTION: The inductor is connected to the first power source supplying the first voltage. The drain electrodes of the first and second transistors are first of all and respectively connected of inductor to the other end. The first and the second variable capacity(Cvar1, Cvar2) are serially connected between the first transistor and the second transistor.
Abstract:
본 발명은 트랜스포머 기반의 차동 튜닝 엘씨 탱크 및 이를 이용한 차동 튜닝 전압제어 발진기에 관한 것으로, LC 탱크는 일차 코일단과 제1 및 제2 이차 코일단을 가진 트랜스포머와, 서로 방향이 다르게 직렬 연결된 제1 가변 커패시터 쌍과, 상기 제1 가변 커패시터 쌍과 동일한 연결 형태를 가지는 제2 가변 커패시터 쌍을 포함하되, 상기 제1 가변 커패시터 쌍을 상기 제1 이차 코일단에 연결하여 양의 방향으로 커패시턴스를 조절하고, 상기 제2 가변 커패시터 쌍을 상기 제2 이차 코일단에 연결하여 음의 방향으로 커패시턴스를 조절하며, 이때 상기 일차 코일단은 양단에 제1 공진노드와 제2 공진노드가 연결된다. 이에 의해 본 발명은 전압제어 발진기에서 발생할 수 있는 공통잡음 및 저주파 잡음의 공진 주파수로 천이되는 문제점을 제거하고, 위상잡음 특성을 개선한다. VCO, 차동 튜닝, 공진기, LC 탱크, 바렉터, 트랜스포머
Abstract:
A transformer-based LC tank with differential-turned structure and the differential-tuned voltage controlled oscillator using the LC tank are provided to improve the quality factor of the resonant cavity by applying the transformer to the LC tank resonant cavity. A differential tuning voltage controlled oscillator comprises a current source portion(110), the first active portion(121), the second active portion(122), and the LC tank resonant cavity. The LC tank resonant cavity generates the resonant frequency and is located between the first active portion and the second active portion. The LC tank resonant cavity comprises the transformer and the first to fourth varactors(Cv11,Cv12,Cv21,Cv22). The first and second varactors are serially connected and the capacitance is controlled into the positive direction. The capacitance of the third and fourth varactors is controlled into the negative direction.